[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230314114825.yiv4vcszr6b7m45w@CAB-WSD-L081021>
Date: Tue, 14 Mar 2023 14:48:25 +0300
From: Dmitry Rokosov <ddrokosov@...rdevices.ru>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
CC: <neil.armstrong@...aro.org>, <jbrunet@...libre.com>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<khilman@...libre.com>, <martin.blumenstingl@...glemail.com>,
<jian.hu@...ogic.com>, <kernel@...rdevices.ru>,
<rockosov@...il.com>, <linux-amlogic@...ts.infradead.org>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v10 3/5] dt-bindings: clock: meson: add A1 PLL and
Peripherals clkcs bindings
On Tue, Mar 14, 2023 at 12:28:40PM +0100, Krzysztof Kozlowski wrote:
> On 13/03/2023 21:12, Dmitry Rokosov wrote:
[...]
> > +#define CLKID_SPIFC 84
> > +#define CLKID_USB_BUS 85
> > +#define CLKID_SD_EMMC 86
> > +#define CLKID_PSRAM 87
> > +#define CLKID_DMC 88
>
> And what is here? Between 88 and 121?
>
Explained below.
> > +#define CLKID_GEN_SEL 121
> > +
> > +#endif /* __A1_CLKC_H */
> > diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> > new file mode 100644
> > index 000000000000..8e97d3fb9d30
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> > @@ -0,0 +1,20 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
>
> I found in changelog:
> "fix license issue, it's GPL-2.0+ only in the current version"
> and I do not understand.
>
> The license is wrong, so what did you fix?
>
Sorry don't get you. Why is it wrong?
I've changed all new source files to GPL-2.0+ except yaml, because yaml
dt bindings schemas require the following license:
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
I've pointed it in the changelog.
> > +/*
> > + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> > + * Author: Jian Hu <jian.hu@...ogic.com>
> > + *
> > + * Copyright (c) 2023, SberDevices. All Rights Reserved.
> > + * Author: Dmitry Rokosov <ddrokosov@...rdevices.ru>
> > + */
> > +
> > +#ifndef __A1_PLL_CLKC_H
> > +#define __A1_PLL_CLKC_H
> > +
> > +#define CLKID_FIXED_PLL 1
> > +#define CLKID_FCLK_DIV2 6
> > +#define CLKID_FCLK_DIV3 7
> > +#define CLKID_FCLK_DIV5 8
> > +#define CLKID_FCLK_DIV7 9
> > +#define CLKID_HIFI_PLL 10
>
>
> Probably I asked about this... why indices are not continuous? You know
> that consumers are allowed to use number 2 and it will be your ABI, even
> though you did not write it in the binding? That's a tricky and
> confusing pattern for no real gains.
Actually, indices are continuou but splitted into two parts: public and
private. The public part is located in the dt bindings and can be included
from device tree sources. The private part is in the drivers/clk/meson
folder, and only clk drivers can use it.
I know, there is some trick when the user just inserts a digit value and
doesn't use constants. But I'm starting from the assumption that such
dts changes will not be approved by maintainers. In other words, the user
*must* apply defined ABI constants from dt bindings; it's a strong
restriction.
--
Thank you,
Dmitry
Powered by blists - more mailing lists