[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <51621d96-bba1-4919-0402-b9300492bc50@ti.com>
Date: Wed, 15 Mar 2023 09:42:59 -0500
From: Andrew Davis <afd@...com>
To: Siddharth Vadapalli <s-vadapalli@...com>, <nm@...com>,
<vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski@...aro.org>,
<krzysztof.kozlowski+dt@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>
Subject: Re: [PATCH v2] arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G
On 3/14/23 11:25 PM, Siddharth Vadapalli wrote:
> Add device tree support to enable MCU CPSW with J784S4 EVM.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
> ---
> Hello,
>
> Please do not merge this patch until the following have been merged:
> 1. https://lore.kernel.org/r/20230314085500.10597-1-j-choudhary@ti.com/
> 2. https://lore.kernel.org/r/20230314152611.140969-2-j-choudhary@ti.com/
> 3. https://lore.kernel.org/r/20230308201513.116638-1-j-choudhary@ti.com/
>
> Changes from v1:
> 1. Drop patch for adding device id property for mcu_navss. This patch is
> now a part of another series at:
> https://lore.kernel.org/r/20230314152611.140969-2-j-choudhary@ti.com/
> 2. Move "mcu_mdio_pins_default" pinctrl to the "davinci_mdio" node.
>
LGTM,
Reviewed-by: Andrew Davis <afd@...com>
> v1:
> https://lore.kernel.org/r/20230314104055.1475054-1-s-vadapalli@ti.com/
>
> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 50 ++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index 8cd4a7ecc121..476ad8915c5b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -140,6 +140,32 @@ J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
> };
> };
>
> +&wkup_pmx0 {
> + mcu_cpsw_pins_default: mcu-cpsw-pins-default {
> + pinctrl-single,pins = <
> + J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
> + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
> + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
> + J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
> + J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
> + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
> + J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
> + J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
> + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
> + J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
> + J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
> + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
> + >;
> + };
> +
> + mcu_mdio_pins_default: mcu-mdio-pins-default {
> + pinctrl-single,pins = <
> + J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
> + J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
> + >;
> + };
> +};
> +
> &main_uart8 {
> status = "okay";
> pinctrl-names = "default";
> @@ -194,3 +220,27 @@ &main_sdhci1 {
> &main_gpio0 {
> status = "okay";
> };
> +
> +&mcu_cpsw {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_cpsw_pins_default>;
> +};
> +
> +&davinci_mdio {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_mdio_pins_default>;
> +
> + mcu_phy0: ethernet-phy@0 {
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,min-output-impedance;
> + };
> +};
> +
> +&mcu_cpsw_port1 {
> + status = "okay";
> + phy-mode = "rgmii-rxid";
> + phy-handle = <&mcu_phy0>;
> +};
Powered by blists - more mailing lists