linux-kernel - [PATCH V2] thermal/core/power_allocator: avoid thermal cdev can not be reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230315093008.17489-1-di.shen@unisoc.com>
Date:   Wed, 15 Mar 2023 17:30:08 +0800
From:   Di Shen <di.shen@...soc.com>
To:     <lukasz.luba@....com>, <rafael@...nel.org>,
        <daniel.lezcano@...aro.org>, <amitk@...nel.org>,
        <rui.zhang@...el.com>
CC:     <linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <xuewen.yan@...soc.com>, <jeson.gao@...soc.com>,
        <orsonzhai@...il.com>, <zhang.lyra@...il.com>
Subject: [PATCH V2] thermal/core/power_allocator: avoid thermal cdev can not be reset

Commit <0952177f2a1f>(thermal/core/power_allocator: Update once
cooling devices when temp is low) adds a update flag to avoid
the thermal event is triggered when there is no need, and
thermal cdev would be update once when temperature is low.

But when the trips are writable, and switch_on_temp is set
to be a higher value, the cooling device state may not be
reset to 0, because last_temperature is smaller than the
switch_on_temp.

For example:
First:
swicth_on_temp=70 control_temp=85;

Then userspace change the trip_temp:
swicth_on_temp=45 control_temp=55 cur_temp=54

Then userspace reset the trip_temp:
swicth_on_temp=70 control_temp=85 cur_temp=57 last_temp=54

At this time, the cooling device state should be reset to 0.
However, because cur_temp(57) < switch_on_temp(70)
last_temp(54) < swicth_on_temp(70)  ---->  update = false,
update is false, the cooling device state can not be reset.

This patch adds a function thermal_cdev_needs_update() to
renew the update flag value only when the trips are writable,
so that thermal cdev->state can be reset after switch_on_temp
changed from low to high.

Signed-off-by: Di Shen <di.shen@...soc.com>
---
 drivers/thermal/gov_power_allocator.c | 39 ++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 0eaf1527d3e3..c9e1f3b15f15 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -59,6 +59,8 @@ static inline s64 div_frac(s64 x, s64 y)
  *			governor switches on when this trip point is crossed.
  *			If the thermal zone only has one passive trip point,
  *			@trip_switch_on should be INVALID_TRIP.
+ * @last_switch_on_temp:Record the last switch_on_temp only when trips
+			are writable.
  * @trip_max_desired_temperature:	last passive trip point of the thermal
  *					zone.  The temperature we are
  *					controlling for.
@@ -70,6 +72,9 @@ struct power_allocator_params {
 	s64 err_integral;
 	s32 prev_err;
 	int trip_switch_on;
+#ifdef CONFIG_THERMAL_WRITABLE_TRIPS
+	int last_switch_on_temp;
+#endif
 	int trip_max_desired_temperature;
 	u32 sustainable_power;
 };
@@ -554,6 +559,25 @@ static void get_governor_trips(struct thermal_zone_device *tz,
 	}
 }
 
+#ifdef CONFIG_THERMAL_WRITABLE_TRIPS
+static bool thermal_cdev_needs_update(struct thermal_zone_device *tz, int switch_on_temp)
+{
+	bool update;
+	struct power_allocator_params *params = tz->governor_data;
+	int last_switch_on_temp = params->last_switch_on_temp;
+
+	update = (tz->last_temperature >= last_switch_on_temp);
+	params->last_switch_on_temp = switch_on_temp;
+
+	return update;
+}
+#else
+static inline bool thermal_cdev_needs_update(struct thermal_zone_device *tz, int switch_on_temp)
+{
+	return false;
+}
+#endif
+
 static void reset_pid_controller(struct power_allocator_params *params)
 {
 	params->err_integral = 0;
@@ -709,12 +733,15 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id)
 		return 0;
 
 	ret = __thermal_zone_get_trip(tz, params->trip_switch_on, &trip);
-	if (!ret && (tz->temperature < trip.temperature)) {
-		update = (tz->last_temperature >= trip.temperature);
-		tz->passive = 0;
-		reset_pid_controller(params);
-		allow_maximum_power(tz, update);
-		return 0;
+	if (!ret) {
+		update = thermal_cdev_needs_update(tz, trip.temperature);
+		if (tz->temperature < trip.temperature) {
+			update |= (tz->last_temperature >= trip.temperature);
+			tz->passive = 0;
+			reset_pid_controller(params);
+			allow_maximum_power(tz, update);
+			return 0;
+		}
 	}
 
 	tz->passive = 1;
-- 
2.17.1