[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e15eac65-94d4-6a70-cab1-4fdb550116f7@collabora.com>
Date: Wed, 15 Mar 2023 11:34:16 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Pin-yen Lin <treapking@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] Revert "arm64: dts: mediatek: mt8173-elm: Move display to
ps8640 auxiliary bus"
Il 15/03/23 05:11, Pin-yen Lin ha scritto:
> This reverts commit c2d94f72140a28d0f516b7c5e8274a9c185a04ff.
>
> The `lg_lp120up1_mode` defined in panel-edp.c is not working for some
> panels used on elm/hana devices. Move the panel node out of the aux-bus
> subnode so the driver only uses the modes retrieved from the EDID.
>
> Signed-off-by: Pin-yen Lin <treapking@...omium.org>
>
This commit was sent to fix display functionality on MT8173-Elm (Acer Chromebook
R13).... apparently this should get fixed with [1].
Investigating if this is the case.
Regards,
Angelo
[1]:
https://patchwork.kernel.org/project/dri-devel/patch/20230315035508.2874915-1-treapking@chromium.org/
> ---
>
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++-----------
> 1 file changed, 12 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index d452cab28c67..d45a2aeb0eb1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -90,6 +90,18 @@ switch-volume-up {
> };
> };
>
> + panel: panel {
> + compatible = "lg,lp120up1";
> + power-supply = <&panel_fixed_3v3>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&ps8640_out>;
> + };
> + };
> + };
> +
> panel_fixed_3v3: regulator1 {
> compatible = "regulator-fixed";
> regulator-name = "PANEL_3V3";
> @@ -282,20 +294,6 @@ ps8640_out: endpoint {
> };
> };
> };
> -
> - aux-bus {
> - panel: panel {
> - compatible = "lg,lp120up1";
> - power-supply = <&panel_fixed_3v3>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&ps8640_out>;
> - };
> - };
> - };
> - };
> };
> };
>
Powered by blists - more mailing lists