[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230315105354.6234-2-daniel.starke@siemens.com>
Date: Wed, 15 Mar 2023 11:53:53 +0100
From: "D. Starke" <daniel.starke@...mens.com>
To: linux-serial@...r.kernel.org, gregkh@...uxfoundation.org,
jirislaby@...nel.org, ilpo.jarvinen@...ux.intel.com
Cc: linux-kernel@...r.kernel.org,
Daniel Starke <daniel.starke@...mens.com>
Subject: [PATCH v2 2/3] tty: n_gsm: allow window size configuration
From: Daniel Starke <daniel.starke@...mens.com>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 6 describes the error recovery mode option
which is based on I frames. The k parameter defines the maximum number of
I frames that a DLC can have unacknowledged as described in chapter 5.7.4.
The current n_gsm implementation does not support the error recovery mode
option. However, the k parameter is also part of the parameter negotiation
message as described in chapter 5.4.6.3.1. Chapter 5.7.4 also notes that
the allowed value range for k is 1-7. That means a 0 is counted as invalid
here. This means that the user needs to configure a valid value here even
if the function itself is not supported. Otherwise, parameter negotiation
may fail.
Allow setting of k via ioctl in gsm_config(). Range checks are already
included.
Signed-off-by: Daniel Starke <daniel.starke@...mens.com>
---
drivers/tty/n_gsm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
v1 -> v2:
No changes.
Link: https://lore.kernel.org/all/20230228062957.3150-2-daniel.starke@siemens.com/
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 9d0e7701ffd4..5bbedfc36fd1 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3276,8 +3276,8 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
int need_close = 0;
int need_restart = 0;
- /* Stuff we don't support yet - UI or I frame transport, windowing */
- if ((c->adaption != 1 && c->adaption != 2) || c->k)
+ /* Stuff we don't support yet - UI or I frame transport */
+ if (c->adaption != 1 && c->adaption != 2)
return -EOPNOTSUPP;
/* Check the MRU/MTU range looks sane */
if (c->mru < MIN_MTU || c->mtu < MIN_MTU)
--
2.34.1
Powered by blists - more mailing lists