[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230315110546.2518305-10-msp@baylibre.com>
Date: Wed, 15 Mar 2023 12:05:39 +0100
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>
Cc: Vincent MAILHOL <mailhol.vincent@...adoo.fr>,
Simon Horman <simon.horman@...igine.com>,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Markus Schneider-Pargmann <msp@...libre.com>
Subject: [PATCH v3 09/16] can: m_can: Add rx coalescing ethtool support
Add the possibility to set coalescing parameters with ethtool.
rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.
Also all values can only be changed if the chip is not active.
Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
---
drivers/net/can/m_can/m_can.c | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 94c962ac6992..7f8decfae81e 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1936,8 +1936,54 @@ static const struct net_device_ops m_can_netdev_ops = {
.ndo_change_mtu = can_change_mtu,
};
+static int m_can_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec,
+ struct kernel_ethtool_coalesce *kec,
+ struct netlink_ext_ack *ext_ack)
+{
+ struct m_can_classdev *cdev = netdev_priv(dev);
+
+ ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
+ ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+
+ return 0;
+}
+
+static int m_can_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec,
+ struct kernel_ethtool_coalesce *kec,
+ struct netlink_ext_ack *ext_ack)
+{
+ struct m_can_classdev *cdev = netdev_priv(dev);
+
+ if (cdev->can.state != CAN_STATE_STOPPED) {
+ netdev_err(dev, "Device is in use, please shut it down first\n");
+ return -EBUSY;
+ }
+
+ if (ec->rx_max_coalesced_frames_irq > cdev->mcfg[MRAM_RXF0].num) {
+ netdev_err(dev, "rx-frames-irq %u greater than the RX FIFO %u\n",
+ ec->rx_max_coalesced_frames_irq,
+ cdev->mcfg[MRAM_RXF0].num);
+ return -EINVAL;
+ }
+ if ((ec->rx_max_coalesced_frames_irq == 0) != (ec->rx_coalesce_usecs_irq == 0)) {
+ netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
+ return -EINVAL;
+ }
+
+ cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
+ cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+
+ return 0;
+}
+
static const struct ethtool_ops m_can_ethtool_ops = {
+ .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
+ ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_coalesce = m_can_get_coalesce,
+ .set_coalesce = m_can_set_coalesce,
};
static int register_m_can_dev(struct net_device *dev)
--
2.39.2
Powered by blists - more mailing lists