linux-kernel - [PATCH] arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 15 Mar 2023 17:39:34 +0530
From:   Sinthu Raja <sinthu.raja@...tralsolutions.com>
To:     Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Vignesh Raghavendra <vigneshr@...com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Sinthu Raja <sinthu.raja@...com>
Subject: [PATCH] arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2

From: Sinthu Raja <sinthu.raja@...com>

Rev E2 of the AM68 SK baseboard has updated the GPIO IO expander pins
functionality. To match the Rev E2 schematics, update existing IO expander
GPIO line names and the corresponding node which uses the expansion(exp1)
node.

Signed-off-by: Sinthu Raja <sinthu.raja@...com>
---

Schematics Ref: https://www.ti.com/lit/zip/sprr463

 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 2091cd2431fb..27a43a8ecffd 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -60,7 +60,7 @@ vdd_mmc1: regulator-sd {
 		regulator-boot-on;
 		enable-active-high;
 		vin-supply = <&vsys_3v3>;
-		gpio = <&exp1 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 8 GPIO_ACTIVE_HIGH>;
 	};
 
 	vdd_sd_dv: regulator-tlv71033 {
@@ -264,12 +264,10 @@ exp1: gpio@21 {
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", "HDMI_PDn",
-					"HDMI_LS_OE", "DP0_3V3 _EN", "BOARDID_EEPROM_WP",
-					"CAN_STB", " ", "GPIO_uSD_PWR_EN", "eDP_ENABLE",
-					"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_MCU_RGMII_RSTz",
-					"IO_EXP_CSI2_EXP_RSTz", " ", "CSI0_B_GPIO1",
-					"CSI1_B_GPIO1";
+		gpio-line-names = " ", " ", " ", " ", " ",
+				  "BOARDID_EEPROM_WP", "CAN_STB", " ",
+				  "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz",
+				  "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " ";
 	};
 };
 
-- 
2.36.1