| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AS8PR04MB840403BB4EA577870C2F4F7D92BC9@AS8PR04MB8404.eurprd04.prod.outlook.com>
Date: Thu, 16 Mar 2023 05:05:54 +0000
From: Sherry Sun <sherry.sun@....com>
To: Greg KH <gregkh@...uxfoundation.org>
CC: "jirislaby@...nel.org" <jirislaby@...nel.org>,
"robh@...nel.org" <robh@...nel.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH] tty: serdev: serdev-ttyport: set correct tty->dev for
serdev framework
> -----Original Message-----
> From: Greg KH <gregkh@...uxfoundation.org>
> Sent: 2023年3月15日 19:33
> To: Sherry Sun <sherry.sun@....com>
> Cc: jirislaby@...nel.org; robh@...nel.org; linux-serial@...r.kernel.org;
> linux-kernel@...r.kernel.org; dl-linux-imx <linux-imx@....com>
> Subject: Re: [PATCH] tty: serdev: serdev-ttyport: set correct tty->dev for
> serdev framework
>
> On Wed, Mar 15, 2023 at 09:49:53AM +0000, Sherry Sun wrote:
> >
> >
> > > -----Original Message-----
> > > From: Greg KH <gregkh@...uxfoundation.org>
> > > Sent: 2023年3月15日 15:40
> > > To: Sherry Sun <sherry.sun@....com>
> > > Cc: jirislaby@...nel.org; robh@...nel.org;
> > > linux-serial@...r.kernel.org; linux-kernel@...r.kernel.org;
> > > dl-linux-imx <linux-imx@....com>
> > > Subject: Re: [PATCH] tty: serdev: serdev-ttyport: set correct
> > > tty->dev for serdev framework
> > >
> > > On Wed, Mar 15, 2023 at 03:21:43PM +0800, Sherry Sun wrote:
> > > > ttyport_open() calls tty_init_dev() to initialize a tty device,
> > > > but
> > > > tty_get_device() cannot get the correct tty->dev for serdev tty in
> > > > alloc_tty_struct(), because serdev framework does not set
> > > > tty_class, so class_find_device_by_devt(tty_class, devt) may always
> return NULL.
> > > >
> > > > For serdev framework, we need to assign the correct ctrl->dev to
> > > > tty->dev.
> > > >
> > > > Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
> > > > Signed-off-by: Sherry Sun <sherry.sun@....com>
> > > > ---
> > > > drivers/tty/serdev/serdev-ttyport.c | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/tty/serdev/serdev-ttyport.c
> > > > b/drivers/tty/serdev/serdev-ttyport.c
> > > > index d367803e2044..bba37ab90215 100644
> > > > --- a/drivers/tty/serdev/serdev-ttyport.c
> > > > +++ b/drivers/tty/serdev/serdev-ttyport.c
> > > > @@ -112,6 +112,7 @@ static int ttyport_open(struct
> > > > serdev_controller
> > > *ctrl)
> > > > tty = tty_init_dev(serport->tty_drv, serport->tty_idx);
> > > > if (IS_ERR(tty))
> > > > return PTR_ERR(tty);
> > > > + tty->dev = &ctrl->dev;
> > >
> > > What in-kernel driver needs this change? How has it not been a
> > > problem so far?
> > >
> >
> > Hi Greg, I searched the users of tty->dev under serial floder, found the
> following drivers need it.
> > drivers/tty/serial/stm32-usart.c:780: pm_wakeup_event(tport-
> >tty->dev, 0);
> > drivers/tty/serial/fsl_lpuart.c:3018: tty_dev = tty->dev;
> > drivers/tty/serial/st-asc.c:266: pm_wakeup_event(tport->tty->dev,
> 0);
> >
> > Actually this issue was found when I tested the nxp Bluetooth driver which
> use serdev framework along with fsl_lpuart.c driver, when system is
> suspending, the following NULL pointer kernel panic is observed.
> > This is because lpuart driver will check the device_may_wakeup(tty->dev)
> to determine if wakeup register bits need to be enabled or not before
> suspend, it works well the the ldisc tty, but since serdev tty doesn't set
> correct tty->dev, so here cause the NULL pointer panic.
> >
> > root@...8ulpevk:~# echo mem > /sys/power/state
> > [ 42.657779] PM: suspend entry (deep)
> > [ 42.664333] Filesystems sync: 0.002 seconds
> > [ 42.717624] Freezing user space processes ... (elapsed 0.001 seconds)
> done.
> > [ 42.727063] OOM killer disabled.
> > [ 42.730383] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
> done.
> > [ 42.753652] fec 29950000.ethernet eth0: Link is Down
> > [ 42.780681] Unable to handle kernel NULL pointer dereference at virtual
> address 00000000000000dc
> > [ 42.789603] Mem abort info:
> > [ 42.792430] ESR = 0x0000000096000004
> > [ 42.796242] EC = 0x25: DABT (current EL), IL = 32 bits
> > [ 42.801661] SET = 0, FnV = 0
> > ......
> >
> > > And why are you saving off a reference counted pointer without
> > > incrementing the reference to the pointer?
> >
> > Sorry, forgive me I am not clearly understand the requirement here, do you
> mean we need to add the following changes?
> > get_device(&ctrl->dev);
> > tty->dev = &ctrl->dev;
> > put_device((&ctrl->dev);
>
> Ick, no, only do put_device() when you are finished with the pointer and are
> not going to access it anymore.
>
> > And per my understanding, the reference count needs to be increased and
> decreased from the user side, here we only do a initialization for the tty->dev.
>
> Then something is not set up properly here, sorry.
Hi Greg,
Thanks for your comments, but what I want to say here is that the caller of tty->dev will care about the reference count, here we only initialize the tty->dev pointer, like what we do in alloc_tty_struct(), seems no need the reference count.
struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
{
...
tty->dev = tty_get_device(tty);
return tty;
}
For the caller of tty->dev, such as uart_suspend_port(), it will call get_device() in device_find_child() before get the tty->dev, and will call put_device() when when it is no longer accessed. The caller will handle this like what we do for the original tty framework. What do you think?
2314 int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
2315 {
...
2323 tty_dev = device_find_child(uport->dev, &match, serial_match_port);
2324 if (tty_dev && device_may_wakeup(tty_dev)) {
2325 enable_irq_wake(uport->irq);
2326 put_device(tty_dev);
2327 mutex_unlock(&port->mutex);
2328 return 0;
2329 }
2330 put_device(tty_dev);
Best Regards
Sherry
Powered by blists - more mailing lists