[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <71b16513-49b1-d9b3-b0b9-4c47e68563ba@kwiboo.se>
Date: Thu, 16 Mar 2023 07:37:18 +0000 (UTC)
From: Jonas Karlman <jonas@...boo.se>
To: Tianling Shen <cnsztl@...il.com>,
Vasily Khoruzhick <anarsoul@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>,
Jagan Teki <jagan@...rulasolutions.com>,
Peter Geis <pgwipeout@...il.com>, Andy Yan <andyshrk@....com>,
Brian Norris <briannorris@...omium.org>,
Chris Morgan <macromorgan@...mail.com>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Andrew Lunn <andrew@...n.ch>,
Michael Riesch <michael.riesch@...fvision.net>,
Maya Matuszczyk <maccraft123mc@...il.com>,
Andrew Powers-Holmes <aholmes@...om.net>,
Sascha Hauer <s.hauer@...gutronix.de>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S
Hi Tianling,
On 2023-03-16 06:34, Tianling Shen wrote:
> Hi Vasily,
>
> On Thu, Mar 16, 2023 at 8:16 AM Vasily Khoruzhick <anarsoul@...il.com> wrote:
>>
>> On Wed, Mar 15, 2023 at 9:02 AM Tianling Shen <cnsztl@...il.com> wrote:
>>>
>>> - Changed phy-mode to rgmii.
>>>
>>> - Fixed pull type in pinctrl for gmac0.
>>>
>>> - Removed duplicate properties in mdio node.
>>> These properties are defined in the gmac0 node already.
>>>
>>> Signed-off-by: Tianling Shen <cnsztl@...il.com>
>>> ---
>>> arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
>>> 1 file changed, 2 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> index e9adf5e66529..2a1118f15c29 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> @@ -57,7 +57,7 @@
>>> assigned-clock-rates = <0>, <125000000>;
>>> clock_in_out = "output";
>>> phy-handle = <&rgmii_phy0>;
>>> - phy-mode = "rgmii-id";
>>> + phy-mode = "rgmii";
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&gmac0_miim
>>> &gmac0_tx_bus2
>>> @@ -79,9 +79,6 @@
>>> reg = <1>;
>>> pinctrl-0 = <ð_phy0_reset_pin>;
>>> pinctrl-names = "default";
>>> - reset-assert-us = <10000>;
>>> - reset-deassert-us = <50000>;
>>> - reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
>>
>> Hmm, I don't see RK_PC4 being used anywhere else. gmac0 has RK_PC5 as
>
> Yes, it's a typo, it should be RK_RC5.
>
>> snsp,reset-gpio. So it essentially drops reset for the PHY. Is it
>> expected?
>
> snsp,reset-gpio defined reset already, so we don't need to set it here again.
>
> ---
>
> snsp,reset-gpio is the legacy binding, but I still have no idea why
> reset-gpios doesn't work,
> the dwmac driver will fail to lookup phy:
>
> [ 10.398514] rk_gmac-dwmac fe2a0000.ethernet eth0: no phy found
> [ 10.399061] rk_gmac-dwmac fe2a0000.ethernet eth0: __stmmac_open:
> Cannot attach to PHY (error: -19)
>
> Any ideas would be appreciated.
Generic ethernet phy driver is not resetting the phy in the same way
that snsp,reset-gpio does, please see top two commits at [1].
I have been meaning to send that out as an RFC but I got stuck in a
u-boot rabbit hole, and I also do not know what the correct way to fix
this would be, so I played with both device tree and code changes.
Will prioritize this and send out a RFC later today.
[1] https://github.com/Kwiboo/linux-rockchip/commits/rk3568-eth-phy-reset
Regards,
Jonas
>
> Thanks,
> Tianling.
>
>>
>>> };
>>> };
>>>
>>> @@ -115,7 +112,7 @@
>>> &pinctrl {
>>> gmac0 {
>>> eth_phy0_reset_pin: eth-phy0-reset-pin {
>>> - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>>> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
>>> };
>>> };
>>>
>>> --
>>> 2.17.1
>>>
Powered by blists - more mailing lists