| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230316081117.14288-6-manivannan.sadhasivam@linaro.org>
Date: Thu, 16 Mar 2023 13:41:03 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: andersson@...nel.org, lpieralisi@...nel.org, kw@...ux.com,
krzysztof.kozlowski+dt@...aro.org, robh@...nel.org
Cc: konrad.dybcio@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_srichara@...cinc.com,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v5 05/19] PCI: qcom: Add missing macros for register fields
Some of the registers are changed using hardcoded bitfields without macros.
This provides no information on what the register setting is about. So add
the macros to those fields for making the code more understandable.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 42 +++++++++++++++-----------
1 file changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 44c31c65695a..f48990ac86dd 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -63,6 +63,7 @@
#define MISC_CONTROL_1_REG 0x8BC
/* PARF_SYS_CTRL register fields */
+#define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29)
#define MST_WAKEUP_EN BIT(13)
#define SLV_WAKEUP_EN BIT(12)
#define MSTR_ACLK_CGC_DIS BIT(10)
@@ -87,6 +88,7 @@
/* PARF_PHY_CTRL register fields */
#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) FIELD_PREP(PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, x)
+#define PHY_TEST_PWR_DOWN BIT(0)
/* PARF_PHY_REFCLK register fields */
#define PHY_REFCLK_SSP_EN BIT(16)
@@ -103,6 +105,12 @@
#define MSTR_AXI_CLK_EN BIT(1)
#define BYPASS BIT(4)
+/* PARF_AXI_MSTR_WR_ADDR_HALT register fields */
+#define EN BIT(31)
+
+/* PARF_LTSSM register fields */
+#define LTSSM_EN BIT(8)
+
/* PARF_DEVICE_TYPE register fields */
#define DEVICE_TYPE_RC 0x4
@@ -440,7 +448,7 @@ static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
@@ -595,7 +603,7 @@ static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
if (IS_ENABLED(CONFIG_PCI_MSI)) {
u32 val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
- val |= BIT(31);
+ val |= EN;
writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
}
@@ -608,7 +616,7 @@ static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
/* enable link training */
val = readl(pcie->parf + PARF_LTSSM);
- val |= BIT(8);
+ val |= LTSSM_EN;
writel(val, pcie->parf + PARF_LTSSM);
}
@@ -715,7 +723,7 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
/* change DBI base address */
@@ -723,15 +731,15 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
/* MAC PHY_POWERDOWN MUX DISABLE */
val = readl(pcie->parf + PARF_SYS_CTRL);
- val &= ~BIT(29);
+ val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
writel(val, pcie->parf + PARF_SYS_CTRL);
val = readl(pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
- val |= BIT(4);
+ val |= BYPASS;
writel(val, pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
- val |= BIT(31);
+ val |= EN;
writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
return 0;
@@ -994,7 +1002,7 @@ static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
/* change DBI base address */
@@ -1002,15 +1010,15 @@ static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
/* MAC PHY_POWERDOWN MUX DISABLE */
val = readl(pcie->parf + PARF_SYS_CTRL);
- val &= ~BIT(29);
+ val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
writel(val, pcie->parf + PARF_SYS_CTRL);
val = readl(pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
- val |= BIT(4);
+ val |= BYPASS;
writel(val, pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
- val |= BIT(31);
+ val |= EN;
writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
return 0;
@@ -1159,7 +1167,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
@@ -1275,7 +1283,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
/* change DBI base address */
@@ -1283,11 +1291,11 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
/* MAC PHY_POWERDOWN MUX DISABLE */
val = readl(pcie->parf + PARF_SYS_CTRL);
- val &= ~BIT(29);
+ val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
writel(val, pcie->parf + PARF_SYS_CTRL);
val = readl(pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
- val |= BIT(4);
+ val |= BYPASS;
writel(val, pcie->parf + PARF_MHI_CLOCK_RESET_CTRL);
/* Enable L1 and L1SS */
@@ -1296,7 +1304,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
writel(val, pcie->parf + PARF_PM_CTRL);
val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
- val |= BIT(31);
+ val |= EN;
writel(val, pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
return 0;
@@ -1388,7 +1396,7 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
val = readl(pcie->parf + PARF_PHY_CTRL);
- val &= ~BIT(0);
+ val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
--
2.25.1
Powered by blists - more mailing lists