| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e99d8ea0-6fd8-2c97-7467-8d481fee8edc@starfivetech.com>
Date: Thu, 16 Mar 2023 19:16:50 +0800
From: Minda Chen <minda.chen@...rfivetech.com>
To: Peter Chen <peter.chen@...nel.org>
CC: Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Conor Dooley <conor@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Pawel Laszczak <pawell@...ence.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Roger Quadros <rogerq@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <linux-usb@...r.kernel.org>,
<linux-riscv@...ts.infradead.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>
Subject: Re: [PATCH v3 4/5] usb: cdns3: add StarFive JH7110 USB driver.
On 2023/3/16 10:46, Peter Chen wrote:
> On 23-03-15 18:44:10, Minda Chen wrote:
>> There is a Cadence USB3 core for JH7110 SoCs, the cdns
>> core is the child of this USB wrapper module device.
>>
>> Signed-off-by: Minda Chen <minda.chen@...rfivetech.com>
>> ---
>> MAINTAINERS | 7 +
>> drivers/usb/cdns3/Kconfig | 11 ++
>> drivers/usb/cdns3/Makefile | 1 +
>> drivers/usb/cdns3/cdns3-starfive.c | 305 +++++++++++++++++++++++++++++
>> 4 files changed, 324 insertions(+)
>> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 4263c005e45c..c530c966ab26 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19985,6 +19985,13 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
>> F: drivers/phy/starfive/phy-jh7110-pcie.c
>> F: drivers/phy/starfive/phy-jh7110-usb.c
>>
>> +STARFIVE JH71X0 USB DRIVERS
>> +M: Emil Renner Berthing <kernel@...il.dk>
>> +M: Minda Chen <minda.chen@...rfivetech.com>
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>> +F: drivers/usb/cdns3/cdns3-starfive.c
>> +
>> STATIC BRANCH/CALL
>> M: Peter Zijlstra <peterz@...radead.org>
>> M: Josh Poimboeuf <jpoimboe@...nel.org>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index b98ca0a1352a..0a514b591527 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>>
>> For example, imx8qm and imx8qxp.
>>
>> +config USB_CDNS3_STARFIVE
>> + tristate "Cadence USB3 support on StarFive SoC platforms"
>> + depends on ARCH_STARFIVE || COMPILE_TEST
>> + help
>> + Say 'Y' or 'M' here if you are building for StarFive SoCs
>> + platforms that contain Cadence USB3 controller core.
>> +
>> + e.g. JH7110.
>> +
>> + If you choose to build this driver as module it will
>> + be dynamically linked and module will be called cdns3-starfive.ko
>> endif
>>
>> if USB_CDNS_SUPPORT
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index 61edb2f89276..48dfae75b5aa 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -24,6 +24,7 @@ endif
>> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
>> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
>> obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o
>> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
>>
>> cdnsp-udc-pci-y := cdnsp-pci.o
>>
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
>> new file mode 100644
>> index 000000000000..a99f98f85235
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,305 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/**
>> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
>> + *
>> + * Copyright (C) 2022 Starfive, Inc.
>> + * Author: Yanhong Wang <yanhong.wang@...rfivetech.com>
>> + * Author: Mason Huo <mason.huo@...rfivetech.com>
>> + * Author: Minda Chen <minda.chen@...rfivetech.com>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/usb/otg.h>
>> +#include "core.h"
>> +
>> +#define USB_STRAP_HOST BIT(17)
>> +#define USB_STRAP_DEVICE BIT(18)
>> +#define USB_STRAP_MASK GENMASK(18, 16)
>> +
>> +#define USB_SUSPENDM_HOST BIT(19)
>> +#define USB_SUSPENDM_MASK BIT(19)
>> +
>> +#define USB_SUSPENDM_BYPS BIT(20)
>> +#define USB_REFCLK_MODE BIT(23)
>> +#define USB_PLL_EN BIT(22)
>> +#define USB_PDRSTN_SPLIT BIT(17)
>> +
>> +#define PCIE_CKREF_SRC_MASK GENMASK(19, 18)
>> +#define PCIE_CLK_SEL_MASK GENMASK(21, 20)
>> +#define PCIE_PHY_MODE BIT(20)
>> +#define PCIE_PHY_MODE_MASK GENMASK(21, 20)
>> +#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2)
>> +#define PCIE_USB3_RATE_MASK GENMASK(6, 5)
>> +#define PCIE_USB3_RX_STANDBY_MASK BIT(7)
>> +#define PCIE_USB3_PHY_ENABLE BIT(4)
>> +
>> +struct cdns_starfive {
>> + struct device *dev;
>> + struct regmap *stg_syscon;
>> + struct regmap *sys_syscon;
>> + struct reset_control *resets;
>> + struct clk_bulk_data *clks;
>> + int num_clks;
>> + u32 sys_offset;
>> + u32 stg_offset_4;
>> + u32 stg_offset_196;
>> + u32 stg_offset_328;
>> + u32 stg_offset_500;
>> + bool usb2_only;
>> +};
>> +
>> +static int cdns_mode_init(struct platform_device *pdev,
>> + struct cdns_starfive *data, const char **out_mode)
>> +{
>> + struct device_node *child;
>> + const char *dr_mode = NULL;
>> +
>> + child = of_get_compatible_child(pdev->dev.of_node, "cdns,usb3");
>> + if (!child) {
>> + return dev_err_probe(&pdev->dev, -ENODEV,
>> + "Failed to find child node\n");
>> + }
>> +
>> + /* Init usb 2.0 utmi phy */
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> + USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> + USB_PLL_EN, USB_PLL_EN);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> + USB_REFCLK_MODE, USB_REFCLK_MODE);
>> +
>> + if (!of_find_property(child, "cdns3,usb3-phy", NULL)) {
>> + /* Disconnect usb 3.0 phy mode */
>> + regmap_update_bits(data->sys_syscon, data->sys_offset,
>> + USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
>> + data->usb2_only = 1;
>> + } else {
>> + /* Config usb 3.0 pipe phy */
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> + PCIE_CKREF_SRC_MASK, 0);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> + PCIE_CLK_SEL_MASK, 0);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_328,
>> + PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> + PCIE_USB3_BUS_WIDTH_MASK, 0);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> + PCIE_USB3_RATE_MASK, 0);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> + PCIE_USB3_RX_STANDBY_MASK, 0);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> + PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
>> +
>> + /* Connect usb 3.0 phy mode */
>> + regmap_update_bits(data->sys_syscon, data->sys_offset,
>> + USB_PDRSTN_SPLIT, 0);
>> + }
>> +
>> + if (!of_property_read_string(child, "dr_mode", &dr_mode)) {
>> + if (!strcmp(dr_mode, "host")) {
>> + regmap_update_bits(data->stg_syscon,
>> + data->stg_offset_4,
>> + USB_STRAP_MASK,
>> + USB_STRAP_HOST);
>> + regmap_update_bits(data->stg_syscon,
>> + data->stg_offset_4,
>> + USB_SUSPENDM_MASK,
>> + USB_SUSPENDM_HOST);
>> + } else if (!strcmp(dr_mode, "peripheral")) {
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> + USB_STRAP_MASK, USB_STRAP_DEVICE);
>> + regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> + USB_SUSPENDM_MASK, 0);
>> + }
>> + }
>> +
>> + if (out_mode)
>> + *out_mode = dr_mode;
>> +
>> + return 0;
>> +}
>> +
>> +static int cdns_clk_rst_init(struct cdns_starfive *data)
>> +{
>> + int ret;
>> +
>> + data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
>> + if (data->num_clks < 0)
>> + return dev_err_probe(data->dev, -ENODEV,
>> + "Failed to get clocks\n");
>> +
>> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> + if (ret)
>> + return dev_err_probe(data->dev, ret,
>> + "failed to enable clocks\n");
>> +
>> + data->resets = devm_reset_control_array_get_exclusive(data->dev);
>> + if (IS_ERR(data->resets)) {
>> + ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
>> + "Failed to get resets");
>> + goto err_clk_init;
>> + }
>> +
>> + ret = reset_control_deassert(data->resets);
>> + if (ret) {
>> + ret = dev_err_probe(data->dev, ret,
>> + "failed to reset clocks\n");
>> + goto err_clk_init;
>> + }
>> +
>> + return ret;
>> +
>> +err_clk_init:
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + return ret;
>> +}
>> +
>> +static int cdns_starfive_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *node = pdev->dev.of_node;
>> + struct cdns_starfive *data;
>> + unsigned int args[4];
>> + const char *dr_mode;
>> + int ret;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, data);
>> +
>> + data->dev = dev;
>> +
>> + data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
>> + "starfive,stg-syscon", 4, args);
>> +
>> + if (IS_ERR(data->stg_syscon))
>> + return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
>> + "Failed to parse starfive,stg-syscon\n");
>> +
>> + data->stg_offset_4 = args[0];
>> + data->stg_offset_196 = args[1];
>> + data->stg_offset_328 = args[2];
>> + data->stg_offset_500 = args[3];
>> +
>> + data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
>> + "starfive,sys-syscon", 1, args);
>> + if (IS_ERR(data->sys_syscon))
>> + return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
>> + "Failed to parse starfive,sys-syscon\n");
>> +
>> + data->sys_offset = args[0];
>> +
>> + ret = cdns_mode_init(pdev, data, &dr_mode);
>> + if (ret)
>> + return ret;
>> +
>> + ret = cdns_clk_rst_init(data);
>> + if (ret)
>> + return ret;
>> +
>> + ret = of_platform_populate(node, NULL, NULL, dev);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "Failed to create children\n");
>> +
>> + device_set_wakeup_capable(dev, true);
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + dev_info(dev, "usb mode %s %s probe success\n",
>> + dr_mode ? dr_mode : "unknown", data->usb2_only ? "2.0" : "3.0");
>> +
>> + return 0;
>> +}
>> +
>> +static int cdns_starfive_remove_core(struct device *dev, void *c)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> +
>> + platform_device_unregister(pdev);
>> +
>> + return 0;
>> +}
>> +
>> +static int cdns_starfive_remove(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> + pm_runtime_get_sync(dev);
>> + device_for_each_child(dev, NULL, cdns_starfive_remove_core);
>> +
>> + reset_control_assert(data->resets);
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + pm_runtime_disable(dev);
>> + pm_runtime_put_noidle(dev);
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int cdns_starfive_resume(struct device *dev)
>> +{
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> + if (ret)
>> + return ret;
>> +
>> + ret = reset_control_deassert(data->resets);
>> + if (ret)
>> + return ret;
>> +
>
> So, you clk enable and reset has no sequence requirements? I see the
> sequence is not the same between resume and suspend routine.
>
> Peter
Thanks, suspend seq should be inverted. I will change the suspend reset and enable sequence.
>> + return 0;
>> +}
>> +
>> +static int cdns_starfive_suspend(struct device *dev)
>> +{
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + reset_control_assert(data->resets);
I will invert this sequence. But these still can work.
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
>> + SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
>> + SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
>> +};
>> +
>> +static const struct of_device_id cdns_starfive_of_match[] = {
>> + { .compatible = "starfive,jh7110-usb", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
>> +
>> +static struct platform_driver cdns_starfive_driver = {
>> + .probe = cdns_starfive_probe,
>> + .remove = cdns_starfive_remove,
>> + .driver = {
>> + .name = "cdns3-starfive",
>> + .of_match_table = cdns_starfive_of_match,
>> + .pm = &cdns_starfive_pm_ops,
>> + },
>> +};
>> +module_platform_driver(cdns_starfive_driver);
>> +
>> +MODULE_ALIAS("platform:cdns3-starfive");
>> +MODULE_AUTHOR("YanHong Wang <yanhong.wang@...rfivetech.com>");
>> +MODULE_AUTHOR("Mason Huo <mason.huo@...rfivetech.com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
>> --
>> 2.17.1
>>
>
Powered by blists - more mailing lists