linux-kernel - [PATCH 3/3] usb: dwc3-am62: Fix up wake-up configuration and spurious wake up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230316131226.89540-4-rogerq@kernel.org>
Date:   Thu, 16 Mar 2023 15:12:26 +0200
From:   Roger Quadros <rogerq@...nel.org>
To:     Thinh.Nguyen@...opsys.com
Cc:     gregkh@...uxfoundation.org, stern@...land.harvard.edu,
        vigneshr@...com, srk@...com, r-gunasekaran@...com,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Roger Quadros <rogerq@...nel.org>
Subject: [PATCH 3/3] usb: dwc3-am62: Fix up wake-up configuration and spurious wake up

Explicitly set and clear wakeup config so we don't leave anything
to chance.

Clear wakeup status on suspend so we know what caused wake up.

The LINESTATE wake up should not be enabled in device mode
if we are not connected to a USB host else it will cause spurious
wake up.

Signed-off-by: Roger Quadros <rogerq@...nel.org>
---
 drivers/usb/dwc3/dwc3-am62.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index 859b48279658..af0524e2f1e1 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -60,6 +60,13 @@
 #define USBSS_WAKEUP_CFG_SESSVALID_EN	BIT(1)
 #define USBSS_WAKEUP_CFG_VBUSVALID_EN	BIT(0)
 
+#define USBSS_WAKEUP_CFG_ALL	(USBSS_WAKEUP_CFG_VBUSVALID_EN | \
+				 USBSS_WAKEUP_CFG_SESSVALID_EN | \
+				 USBSS_WAKEUP_CFG_LINESTATE_EN | \
+				 USBSS_WAKEUP_CFG_OVERCURRENT_EN)
+
+#define USBSS_WAKEUP_CFG_NONE	0
+
 /* WAKEUP STAT register bits */
 #define USBSS_WAKEUP_STAT_OVERCURRENT	BIT(4)
 #define USBSS_WAKEUP_STAT_LINESTATE	BIT(3)
@@ -103,6 +110,7 @@ struct dwc3_data {
 	struct regmap *syscon;
 	unsigned int offset;
 	unsigned int vbus_divider;
+	u32 wakeup_stat;
 };
 
 static const int dwc3_ti_rate_table[] = {	/* in KHZ */
@@ -294,6 +302,7 @@ static int dwc3_ti_suspend_common(struct device *dev)
 {
 	struct dwc3_data *data = dev_get_drvdata(dev);
 	u32 reg, current_prtcap_dir;
+	u32 vbus_stat;
 
 	if (device_may_wakeup(dev)) {
 		reg = dwc3_ti_readl(data, USBSS_CORE_STAT);
@@ -302,12 +311,20 @@ static int dwc3_ti_suspend_common(struct device *dev)
 		/* Set wakeup config enable bits */
 		reg = dwc3_ti_readl(data, USBSS_WAKEUP_CONFIG);
 		if (current_prtcap_dir == DWC3_GCTL_PRTCAP_HOST) {
-			reg |= USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN;
+			reg = USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN;
 		} else {
-			reg |= USBSS_WAKEUP_CFG_OVERCURRENT_EN | USBSS_WAKEUP_CFG_LINESTATE_EN |
-			       USBSS_WAKEUP_CFG_VBUSVALID_EN;
+			reg = USBSS_WAKEUP_CFG_VBUSVALID_EN | USBSS_WAKEUP_CFG_SESSVALID_EN;
+			/*
+			 * Enable LINESTATE wake up only if connected to bus else
+			 * it causes spurious wake-up.
+			 */
+			vbus_stat = dwc3_ti_readl(data, USBSS_VBUS_STAT);
+			if (vbus_stat & (USBSS_VBUS_STAT_SESSVALID | USBSS_VBUS_STAT_VBUSVALID))
+				reg |= USBSS_WAKEUP_CFG_LINESTATE_EN;
 		}
 		dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, reg);
+		/* clear wakeup status so we know what caused the wake up */
+		dwc3_ti_writel(data, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR);
 	}
 
 	clk_disable_unprepare(data->usb2_refclk);
@@ -324,16 +341,11 @@ static int dwc3_ti_resume_common(struct device *dev)
 
 	if (device_may_wakeup(dev)) {
 		/* Clear wakeup config enable bits */
-		reg = dwc3_ti_readl(data, USBSS_WAKEUP_CONFIG);
-		reg &= ~(USBSS_WAKEUP_CFG_OVERCURRENT_EN | USBSS_WAKEUP_CFG_LINESTATE_EN |
-			 USBSS_WAKEUP_CFG_VBUSVALID_EN);
-		dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, reg);
+		dwc3_ti_writel(data, USBSS_WAKEUP_CONFIG, USBSS_WAKEUP_CFG_NONE);
 	}
 
 	reg = dwc3_ti_readl(data, USBSS_WAKEUP_STAT);
-	/* Clear the wakeup status with wakeup clear bit */
-	reg |= USBSS_WAKEUP_STAT_CLR;
-	dwc3_ti_writel(data, USBSS_WAKEUP_STAT, reg);
+	data->wakeup_stat = reg;
 
 	return 0;
 }
-- 
2.34.1