| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <43b7e386-5b85-3d51-5431-4a46b2779729@csgroup.eu>
Date: Thu, 16 Mar 2023 14:00:42 +0000
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: Herve Codina <herve.codina@...tlin.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Derek Kiernan <derek.kiernan@...inx.com>,
Dragan Cvetic <dragan.cvetic@...inx.com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v2 2/7] drivers: misc: Add support for the Lantiq PEF2256
framer
Le 16/03/2023 à 13:27, Herve Codina a écrit :
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
>
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> ---
> drivers/misc/Kconfig | 17 +
> drivers/misc/Makefile | 1 +
> drivers/misc/pef2256.c | 1441 +++++++++++++++++++++++++++++++++++++++
> include/linux/pef2256.h | 36 +
> 4 files changed, 1495 insertions(+)
> create mode 100644 drivers/misc/pef2256.c
> create mode 100644 include/linux/pef2256.h
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 433aa4197785..f03739163c53 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -376,6 +376,23 @@ config HMC6352
> This driver provides support for the Honeywell HMC6352 compass,
> providing configuration and heading data via sysfs.
>
> +config PEF2256
> + tristate "Lantiq PEF2256 (FALC56) framer"
> + depends on HAS_IOMEM
> + select PINCTRL
> + select PINMUX
> + select GENERIC_PINCONF
> + help
> + This option enables support for the Lantiq PEF2256 framer, also known
> + as FALC56. This framer and its line interface component is designed
> + to fulfill all required interfacing between analog E1/T1/J1 lines and
> + the digital PCM system highway.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called pef2256.
> +
> config DS1682
> tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
> depends on I2C
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 56de43943cd5..a26f044ab9dd 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -35,6 +35,7 @@ obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
> obj-$(CONFIG_DS1682) += ds1682.o
> obj-$(CONFIG_C2PORT) += c2port/
> obj-$(CONFIG_HMC6352) += hmc6352.o
> +obj-$(CONFIG_PEF2256) += pef2256.o
> obj-y += eeprom/
> obj-y += cb710/
> obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
> diff --git a/drivers/misc/pef2256.c b/drivers/misc/pef2256.c
> new file mode 100644
> index 000000000000..b21586084408
> --- /dev/null
> +++ b/drivers/misc/pef2256.c
> @@ -0,0 +1,1441 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PEF2256 also known as FALC56 driver
> + *
> + * Copyright 2023 CS GROUP France
> + *
> + * Author: Herve Codina <herve.codina@...tlin.com>
> + */
> +
> +#include <linux/pef2256.h>
> +#include <linux/clk.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define PEF2256_CMDR 0x02 /* Command Register */
> +#define PEF2256_CMDR_RRES BIT(6)
> +#define PEF2256_CMDR_XRES BIT(4)
> +#define PEF2256_CMDR_SRES BIT(0)
> +#define PEF2256_IMR0 0x14 /* Interrupt Mask Register 0 */
> +#define PEF2256_IMR1 0x15 /* Interrupt Mask Register 1 */
> +#define PEF2256_IMR2 0x16 /* Interrupt Mask Register 2 */
> +#define PEF2256_IMR3 0x17 /* Interrupt Mask Register 3 */
> +#define PEF2256_IMR4 0x18 /* Interrupt Mask Register 4 */
> +#define PEF2256_IMR5 0x19 /* Interrupt Mask Register 5 */
> +#define PEF2256_FMR0 0x1C /* Framer Mode Register 0 */
> +#define PEF2256_FMR0_XC_MASK (0x3 << 6)
> +#define PEF2256_FMR0_XC_NRZ (0x0 << 6)
> +#define PEF2256_FMR0_XC_CMI (0x1 << 6)
> +#define PEF2256_FMR0_XC_AMI (0x2 << 6)
> +#define PEF2256_FMR0_XC_HDB3 (0x3 << 6)
> +#define PEF2256_FMR0_RC_MASK (0x3 << 4)
> +#define PEF2256_FMR0_RC_NRZ (0x0 << 4)
> +#define PEF2256_FMR0_RC_CMI (0x1 << 4)
> +#define PEF2256_FMR0_RC_AMI (0x2 << 4)
> +#define PEF2256_FMR0_RC_HDB3 (0x3 << 4)
> +#define PEF2256_FMR1 0x1D /* Framer Mode Register 1 */
> +#define PEF2256_FMR1_XFS BIT(3)
> +#define PEF2256_FMR1_ECM BIT(2)
> +/* SSD is defined on 2 bits. The other bit is on SIC1 register */
> +#define PEF2256_FMR1_SSD_MASK BIT(1)
> +#define PEF2256_FMR1_SSD_2048 0
> +#define PEF2256_FMR1_SSD_4096 BIT(1)
> +#define PEF2256_FMR1_SSD_8192 0
> +#define PEF2256_FMR1_SSD_16384 BIT(1)
> +#define PEF2256_FMR2 0x1E /* Framer Mode Register 2 */
> +#define PEF2256_FMR2_RFS_MASK (0x3 << 6)
> +#define PEF2256_FMR2_RFS_DOUBLEFRAME (0x0 << 6)
> +#define PEF2256_FMR2_RFS_CRC4_MULTIFRAME (0x2 << 6)
> +#define PEF2256_FMR2_RFS_AUTO_MULTIFRAME (0x3 << 6)
> +#define PEF2256_FMR2_AXRA BIT(1)
> +#define PEF2256_LOOP 0x1F /* Channel Loop-Back */
> +#define PEF2256_XSW 0x20 /* Transmit Service Word */
> +#define PEF2256_XSW_XSIS BIT(7)
> +#define PEF2256_XSW_XTM BIT(6)
> +#define PEF2256_XSW_XY_MASK (0x1f << 0)
> +#define PEF2256_XSW_XY(_v) ((_v) & 0x1f)
> +#define PEF2256_XSP 0x21 /* Transmit Spare Bits */
> +#define PEF2256_XSP_XSIF BIT(2)
> +#define PEF2256_XC0 0x22 /* Transmit Control 0 */
> +#define PEF2256_XC1 0x23 /* Transmit Control 1 */
> +#define PEF2256_RC0 0x24 /* Receive Control 0 */
> +#define PEF2256_RC0_SWD BIT(7)
> +#define PEF2256_RC0_ASY4 BIT(6)
> +#define PEF2256_RC1 0x25 /* Receive Control 1 */
> +#define PEF2256_XPM0 0x26 /* Transmit Pulse Mask 0 */
> +#define PEF2256_XPM1 0x27 /* Transmit Pulse Mask 1 */
> +#define PEF2256_XPM2 0x28 /* Transmit Pulse Mask 2 */
> +#define PEF2256_XPM2_XLT BIT(6)
> +#define PEF2256_TSWM 0x29 /* Transparent Service Word Mask */
> +#define PEF2256_LIM0 0x36 /* Line Interface Mode 0 */
> +#define PEF2256_2X_LIM0_BIT3 BIT(3) /* v2.x, described as a forced '1' bit */
> +#define PEF2256_LIM0_MAS BIT(0)
> +#define PEF2256_LIM1 0x37 /* Line Interface Mode 1 */
> +#define PEF2256_12_LIM1_RIL_MASK (0x7 << 4)
> +#define PEF2256_12_LIM1_RIL_910 (0x0 << 4)
> +#define PEF2256_12_LIM1_RIL_740 (0x1 << 4)
> +#define PEF2256_12_LIM1_RIL_590 (0x2 << 4)
> +#define PEF2256_12_LIM1_RIL_420 (0x3 << 4)
> +#define PEF2256_12_LIM1_RIL_320 (0x4 << 4)
> +#define PEF2256_12_LIM1_RIL_210 (0x5 << 4)
> +#define PEF2256_12_LIM1_RIL_160 (0x6 << 4)
> +#define PEF2256_12_LIM1_RIL_100 (0x7 << 4)
> +#define PEF2256_2X_LIM1_RIL_MASK (0x7 << 4)
> +#define PEF2256_2X_LIM1_RIL_2250 (0x0 << 4)
> +#define PEF2256_2X_LIM1_RIL_1100 (0x1 << 4)
> +#define PEF2256_2X_LIM1_RIL_600 (0x2 << 4)
> +#define PEF2256_2X_LIM1_RIL_350 (0x3 << 4)
> +#define PEF2256_2X_LIM1_RIL_210 (0x4 << 4)
> +#define PEF2256_2X_LIM1_RIL_140 (0x5 << 4)
> +#define PEF2256_2X_LIM1_RIL_100 (0x6 << 4)
> +#define PEF2256_2X_LIM1_RIL_50 (0x7 << 4)
> +#define PEF2256_PCD 0x38 /* Pulse Count Detection */
> +#define PEF2256_PCR 0x39 /* Pulse Count Recovery */
> +#define PEF2256_LIM2 0x3A /* Line Interface Mode 2 */
> +#define PEF2256_LIM2_SLT_MASK (0x3 << 4)
> +#define PEF2256_LIM2_SLT_THR55 (0x0 << 4)
> +#define PEF2256_LIM2_SLT_THR67 (0x1 << 4)
> +#define PEF2256_LIM2_SLT_THR50 (0x2 << 4)
> +#define PEF2256_LIM2_SLT_THR45 (0x3 << 4)
> +#define PEF2256_LIM2_ELT BIT(2)
> +#define PEF2256_SIC1 0x3E /* System Interface Control 1 */
> +#define PEF2256_SIC1_SSC_MASK (BIT(7) | BIT(3))
> +#define PEF2256_SIC1_SSC_2048 (0)
> +#define PEF2256_SIC1_SSC_4096 BIT(3)
> +#define PEF2256_SIC1_SSC_8192 BIT(7)
> +#define PEF2256_SIC1_SSC_16384 (BIT(7) | BIT(3))
> +/* SSD is defined on 2 bits. The other bit is on FMR1 register */
> +#define PEF2256_SIC1_SSD_MASK BIT(6)
> +#define PEF2256_SIC1_SSD_2048 0
> +#define PEF2256_SIC1_SSD_4096 0
> +#define PEF2256_SIC1_SSD_8192 BIT(6)
> +#define PEF2256_SIC1_SSD_16384 BIT(6)
> +#define PEF2256_SIC1_RBS_MASK (0x3 << 4)
> +#define PEF2256_SIC1_RBS_2FRAMES (0x0 << 4)
> +#define PEF2256_SIC1_RBS_1FRAME (0x1 << 4)
> +#define PEF2256_SIC1_RBS_96BITS (0x2 << 4)
> +#define PEF2256_SIC1_RBS_BYPASS (0x3 << 4)
> +#define PEF2256_SIC1_XBS_MASK (0x3 << 0)
> +#define PEF2256_SIC1_XBS_BYPASS (0x0 << 0)
> +#define PEF2256_SIC1_XBS_1FRAME (0x1 << 0)
> +#define PEF2256_SIC1_XBS_2FRAMES (0x2 << 0)
> +#define PEF2256_SIC1_XBS_96BITS (0x3 << 0)
> +#define PEF2256_SIC2 0x3F /* System Interface Control 2 */
> +#define PEF2256_SIC2_SICS_MASK (0x7 << 1)
> +#define PEF2256_SIC2_SICS(_v) ((_v) << 1)
> +#define PEF2256_SIC3 0x40 /* System Interface Control 3 */
> +#define PEF2256_SIC3_RTRI BIT(5)
> +#define PEF2256_SIC3_RESX BIT(3)
> +#define PEF2256_SIC3_RESR BIT(2)
> +#define PEF2256_CMR1 0x44 /* Clock Mode Register 1 */
> +#define PEF2256_CMR1_RS_MASK (0x3 << 4)
> +#define PEF2256_CMR1_RS_DPLL (0x0 << 4)
> +#define PEF2256_CMR1_RS_DPLL_LOS_HIGH (0x1 << 4)
> +#define PEF2256_CMR1_RS_DCOR_2048 (0x2 << 4)
> +#define PEF2256_CMR1_RS_DCOR_8192 (0x3 << 4)
> +#define PEF2256_CMR1_DCS BIT(3)
> +#define PEF2256_CMR2 0x45 /* Clock Mode Register 2 */
> +#define PEF2256_CMR2_DCOXC BIT(5)
> +#define PEF2256_GCR 0x46 /* Global Configuration Register */
> +#define PEF2256_GCR_SCI BIT(6)
> +#define PEF2256_GCR_ECMC BIT(4)
> +#define PEF2256_PC1 0x80 /* Port Configuration 1 */
> +#define PEF2256_PC2 0x81 /* Port Configuration 2 */
> +#define PEF2256_PC3 0x82 /* Port Configuration 3 */
> +#define PEF2256_PC4 0x83 /* Port Configuration 4 */
> +#define PEF2256_12_PC_RPC_MASK (0x7 << 4)
> +#define PEF2256_12_PC_RPC_SYPR (0x0 << 4)
> +#define PEF2256_12_PC_RPC_RFM (0x1 << 4)
> +#define PEF2256_12_PC_RPC_RFMB (0x2 << 4)
> +#define PEF2256_12_PC_RPC_RSIGM (0x3 << 4)
> +#define PEF2256_12_PC_RPC_RSIG (0x4 << 4)
> +#define PEF2256_12_PC_RPC_DLR (0x5 << 4)
> +#define PEF2256_12_PC_RPC_FREEZE (0x6 << 4)
> +#define PEF2256_12_PC_RPC_RFSP (0x7 << 4)
> +#define PEF2256_12_PC_XPC_MASK (0xf << 0)
> +#define PEF2256_12_PC_XPC_SYPX (0x0 << 0)
> +#define PEF2256_12_PC_XPC_XFMS (0x1 << 0)
> +#define PEF2256_12_PC_XPC_XSIG (0x2 << 0)
> +#define PEF2256_12_PC_XPC_TCLK (0x3 << 0)
> +#define PEF2256_12_PC_XPC_XMFB (0x4 << 0)
> +#define PEF2256_12_PC_XPC_XSIGM (0x5 << 0)
> +#define PEF2256_12_PC_XPC_DLX (0x6 << 0)
> +#define PEF2256_12_PC_XPC_XCLK (0x7 << 0)
> +#define PEF2256_12_PC_XPC_XLT (0x8 << 0)
> +#define PEF2256_2X_PC_RPC_MASK (0xf << 4)
> +#define PEF2256_2X_PC_RPC_SYPR (0x0 << 4)
> +#define PEF2256_2X_PC_RPC_RFM (0x1 << 4)
> +#define PEF2256_2X_PC_RPC_RFMB (0x2 << 4)
> +#define PEF2256_2X_PC_RPC_RSIGM (0x3 << 4)
> +#define PEF2256_2X_PC_RPC_RSIG (0x4 << 4)
> +#define PEF2256_2X_PC_RPC_DLR (0x5 << 4)
> +#define PEF2256_2X_PC_RPC_FREEZE (0x6 << 4)
> +#define PEF2256_2X_PC_RPC_RFSP (0x7 << 4)
> +#define PEF2256_2X_PC_RPC_GPI (0x9 << 4)
> +#define PEF2256_2X_PC_RPC_GPOH (0xa << 4)
> +#define PEF2256_2X_PC_RPC_GPOL (0xb << 4)
> +#define PEF2256_2X_PC_RPC_LOS (0xc << 4)
> +#define PEF2256_2X_PC_XPC_MASK (0xf << 0)
> +#define PEF2256_2X_PC_XPC_SYPX (0x0 << 0)
> +#define PEF2256_2X_PC_XPC_XFMS (0x1 << 0)
> +#define PEF2256_2X_PC_XPC_XSIG (0x2 << 0)
> +#define PEF2256_2X_PC_XPC_TCLK (0x3 << 0)
> +#define PEF2256_2X_PC_XPC_XMFB (0x4 << 0)
> +#define PEF2256_2X_PC_XPC_XSIGM (0x5 << 0)
> +#define PEF2256_2X_PC_XPC_DLX (0x6 << 0)
> +#define PEF2256_2X_PC_XPC_XCLK (0x7 << 0)
> +#define PEF2256_2X_PC_XPC_XLT (0x8 << 0)
> +#define PEF2256_2X_PC_XPC_GPI (0x9 << 0)
> +#define PEF2256_2X_PC_XPC_GPOH (0xa << 0)
> +#define PEF2256_2X_PC_XPC_GPOL (0xb << 0)
> +#define PEF2256_PC5 0x84 /* Port Configuration 5 */
> +#define PEF2256_PC5_CRP BIT(0)
> +#define PEF2256_GPC1 0x85 /* Global Port Configuration 1 */
> +#define PEF2256_GPC1_CSFP_MASK (0x3 << 5)
> +#define PEF2256_GPC1_CSFP_SEC_IN_HIGH (0x0 << 5)
> +#define PEF2256_GPC1_CSFP_SEC_OUT_HIGH (0x1 << 5)
> +#define PEF2256_GPC1_CSFP_FSC_OUT_HIGH (0x2 << 5)
> +#define PEF2256_GPC1_CSFP_FSC_OUT_LOW (0x3 << 5)
> +#define PEF2256_PC6 0x86 /* Port Configuration 6 */
> +#define PEF2256_GCM(_n) (0x92 + _n - 1) /* Global Counter Mode n=1..8 */
Should be (0x92 + (_n) - 1) to avoid any risk.
> +#define PEF2256_GCM1 0x92 /* Global Counter Mode 1 */
> +#define PEF2256_GCM2 0x93 /* Global Counter Mode 2 */
> +#define PEF2256_GCM3 0x94 /* Global Counter Mode 3 */
> +#define PEF2256_GCM4 0x95 /* Global Counter Mode 4 */
> +#define PEF2256_GCM5 0x96 /* Global Counter Mode 5 */
> +#define PEF2256_GCM6 0x97 /* Global Counter Mode 6 */
> +#define PEF2256_GCM7 0x98 /* Global Counter Mode 7 */
> +#define PEF2256_GCM8 0x99 /* Global Counter Mode 8 */
> +
> +#define PEF2256_VSTR 0x4A /* Version Status Register */
> +#define PEF2256_VSTR_VERSION_12 0x00
> +#define PEF2256_VSTR_VERSION_21 0x10
> +#define PEF2256_VSTR_VERSION_2x 0x05
> +#define PEF2256_FRS0 0x4C /* Framer Receive Status 0 */
> +#define PEF2256_FRS0_LOS BIT(7)
> +#define PEF2256_FRS0_AIS BIT(6)
> +#define PEF2256_ISR(_n) (0x68 + n) /* Interrupt Status Register (n=0..5) */
> +#define PEF2256_ISR0 0x68 /* Interrupt Status Register 0 */
> +#define PEF2256_ISR1 0x69 /* Interrupt Status Register 1 */
> +#define PEF2256_ISR2 0x6A /* Interrupt Status Register 2 */
> +#define PEF2256_ISR3 0x6B /* Interrupt Status Register 3 */
> +#define PEF2256_ISR4 0x6C /* Interrupt Status Register 4 */
> +#define PEF2256_ISR5 0x6D /* Interrupt Status Register 5 */
> +#define PEF2256_GIS 0x6E /* Global Interrupt Status */
> +#define PEF2256_GIS_ISR(_n) (1<<(n))
_n or n ?
> +#define PEF2256_WID 0xEC /* Wafer Identification Register */
> +#define PEF2256_12_WID_MASK 0x03
> +#define PEF2256_12_WID_VERSION_12 0x03
> +#define PEF2256_2X_WID_MASK 0xc0
> +#define PEF2256_2X_WID_VERSION_21 0x00
> +#define PEF2256_2X_WID_VERSION_22 0x40
> +
> +/* IMR2/ISR2 Interrupts */
> +#define PEF2256_INT2_AIS BIT(3)
> +#define PEF2256_INT2_LOS BIT(2)
> +
> +enum pef2256_version {
> + PEF2256_VERSION_UNKNOWN,
> + PEF2256_VERSION_1_2,
> + PEF2256_VERSION_2_1,
> + PEF2256_VERSION_2_2,
> +};
> +
> +enum pef2256_frame_type {
> + PEF2256_FRAME_E1_DOUBLEFRAME,
> + PEF2256_FRAME_E1_CRC4_MULTIFRAME,
> + PEF2256_FRAME_E1_AUTO_MULTIFRAME,
> + PEF2256_FRAME_T1J1_4FRAME,
> + PEF2256_FRAME_T1J1_12FRAME,
> + PEF2256_FRAME_T1J1_24FRAME,
> + PEF2256_FRAME_T1J1_72FRAME,
> +};
> +
> +struct pef2256_pinreg_desc {
> + int offset;
> + u8 mask;
> +};
> +
> +struct pef2256_function_desc {
> + const char *name;
> + const char * const*groups;
> + unsigned int ngroups;
> + u8 func_val;
> +};
> +
> +struct pef2256 {
> + struct device *dev;
> + void *__iomem regs;
> + enum pef2256_version version;
> + spinlock_t lock;
> + struct clk *mclk;
> + struct gpio_desc *reset_gpio;
> + struct {
> + struct pinctrl_desc pctrl_desc;
> + const struct pef2256_function_desc *functions;
> + unsigned int nfunctions;
> + } pinctrl;
> + bool is_e1;
> + u32 sysclk_rate;
> + u32 data_rate;
> + bool is_tx_falling_edge;
> + bool is_subordinate;
> + enum pef2256_frame_type frame_type;
> + u8 channel_phase;
> + bool is_carrier_on;
> + struct atomic_notifier_head event_notifier_list;
> +};
> +
> +static inline u8 pef2256_read8(struct pef2256 *pef2256, int offset)
> +{
> + return ioread8(pef2256->regs + offset);
> +}
> +
> +static inline void pef2256_write8(struct pef2256 *pef2256, int offset, u8 val)
> +{
> + iowrite8(val, pef2256->regs + offset);
> +}
> +
> +static inline void pef2256_clrbits8(struct pef2256 *pef2256, int offset, u8 clr)
> +{
> + u8 v;
> +
> + v = pef2256_read8(pef2256, offset);
> + v &= ~clr;
> + pef2256_write8(pef2256, offset, v);
> +}
Not sure it is worth the number of lines.
Would liekly be as good with just:
pef2256_write8(pef2256, offset, pef2256_read8(pef2256, offset) & ~clr);
Same for all.
Also, it shouldn't need to be flagged 'inline' as it is defined in the C
file it is used. GCC will decide by itself if it is worth inlining.
> +
> +static inline void pef2256_setbits8(struct pef2256 *pef2256, int offset, u8 set)
> +{
> + u8 v;
> +
> + v = pef2256_read8(pef2256, offset);
> + v |= set;
> + pef2256_write8(pef2256, offset, v);
> +}
> +
> +
> +static inline void pef2256_clrsetbits8(struct pef2256 *pef2256, int offset, u8 clr, u8 set)
> +{
> + u8 v;
> +
> + v = pef2256_read8(pef2256, offset);
> + v &= ~clr;
> + v |= set;
> + pef2256_write8(pef2256, offset, v);
> +}
> +
> +static enum pef2256_version pef2256_get_version(struct pef2256 *pef2256)
> +{
> + enum pef2256_version version;
> + const char *version_txt;
> + u8 vstr, wid;
> +
> + vstr = pef2256_read8(pef2256, PEF2256_VSTR);
> + wid = pef2256_read8(pef2256, PEF2256_WID);
> +
> + switch (vstr) {
> + case PEF2256_VSTR_VERSION_12:
> + if ((wid & PEF2256_12_WID_MASK) == PEF2256_12_WID_VERSION_12) {
> + version_txt = "1.2";
> + version = PEF2256_VERSION_1_2;
> + goto end;
> + }
> + break;
> + case PEF2256_VSTR_VERSION_2x:
> + switch (wid & PEF2256_2X_WID_MASK) {
> + case PEF2256_2X_WID_VERSION_21:
> + version_txt = "2.1 (2.x)";
> + version = PEF2256_VERSION_2_1;
> + goto end;
> + case PEF2256_2X_WID_VERSION_22:
> + version_txt = "2.2 (2.x)";
> + version = PEF2256_VERSION_2_2;
> + goto end;
> + default:
> + break;
> + }
> + break;
> + case PEF2256_VSTR_VERSION_21:
> + version_txt = "2.1";
> + version = PEF2256_VERSION_2_1;
> + goto end;
> + default:
> + break;
A default doing nothing is not needed unless the switch handles a enum
and you have not covered all possible values.
My preference would be that you use the default to set:
version = PEF2256_VERSION_UNKNOWN;
then use an if (version == PEF2256_VERSION_UNKNOWN) / else below for the
dev_err/dev_info.
> + }
> +
> + dev_err(pef2256->dev, "Unknown version (0x%02x, 0x%02x)\n", vstr, wid);
> + return PEF2256_VERSION_UNKNOWN;
> +
> +end:
> + dev_info(pef2256->dev, "Version %s detected\n", version_txt);
> + return version;
> +}
> +
> +static int pef2256_12_setup_gcm(struct pef2256 *pef2256)
> +{
> + static const u8 gcm_1544000[6] = {0xF0, 0x51, 0x00, 0x80, 0x00, 0x15};
> + static const u8 gcm_2048000[6] = {0x00, 0x58, 0xD2, 0xC2, 0x00, 0x10};
> + static const u8 gcm_8192000[6] = {0x00, 0x58, 0xD2, 0xC2, 0x03, 0x10};
> + static const u8 gcm_10000000[6] = {0x90, 0x51, 0x81, 0x8F, 0x04, 0x10};
> + static const u8 gcm_12352000[6] = {0xF0, 0x51, 0x00, 0x80, 0x07, 0x15};
> + static const u8 gcm_16384000[6] = {0x00, 0x58, 0xD2, 0xC2, 0x07, 0x10};
> + unsigned long mclk_rate;
> + const u8 *gcm;
> + int i;
> +
> + mclk_rate = clk_get_rate(pef2256->mclk);
> + switch (mclk_rate) {
> + case 1544000:
> + gcm = gcm_1544000;
> + break;
> + case 2048000:
> + gcm = gcm_2048000;
> + break;
> + case 8192000:
> + gcm = gcm_8192000;
> + break;
> + case 10000000:
> + gcm = gcm_10000000;
> + break;
> + case 12352000:
> + gcm = gcm_12352000;
> + break;
> + case 16384000:
> + gcm = gcm_16384000;
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported v1.2 MCLK rate %lu\n", mclk_rate);
> + return -EINVAL;
> + }
> + for (i = 0; i < 6; i++)
> + pef2256_write8(pef2256, PEF2256_GCM(i+1), gcm[i]);
> +
> + return 0;
> +}
> +
> +static int pef2256_2x_setup_gcm(struct pef2256 *pef2256)
> +{
> + static const u8 gcm_1544000[8] = {0x00, 0x15, 0x00, 0x08, 0x00, 0x3F, 0x9C, 0xDF};
> + static const u8 gcm_2048000[8] = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x2F, 0xDB, 0xDF};
> + static const u8 gcm_8192000[8] = {0x00, 0x18, 0xFB, 0x0B, 0x00, 0x0B, 0xDB, 0xDF};
> + static const u8 gcm_10000000[8] = {0x40, 0x1B, 0x3D, 0x0A, 0x00, 0x07, 0xC9, 0xDC};
> + static const u8 gcm_12352000[8] = {0x00, 0x19, 0x00, 0x08, 0x01, 0x0A, 0x98, 0xDA};
> + static const u8 gcm_16384000[8] = {0x00, 0x18, 0xFB, 0x0B, 0x01, 0x0B, 0xDB, 0xDF};
> + unsigned long mclk_rate;
> + const u8 *gcm;
> + int i;
> +
> + mclk_rate = clk_get_rate(pef2256->mclk);
> + switch (mclk_rate) {
> + case 1544000:
> + gcm = gcm_1544000;
> + break;
> + case 2048000:
> + gcm = gcm_2048000;
> + break;
> + case 8192000:
> + gcm = gcm_8192000;
> + break;
> + case 10000000:
> + gcm = gcm_10000000;
> + break;
> + case 12352000:
> + gcm = gcm_12352000;
> + break;
> + case 16384000:
> + gcm = gcm_16384000;
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported v2.x MCLK rate %lu\n", mclk_rate);
> + return -EINVAL;
> + }
> + for (i = 0; i < 8; i++)
> + pef2256_write8(pef2256, PEF2256_GCM(i+1), gcm[i]);
> +
> + return 0;
> +}
This function and the previous one look very similar, can we merge them ?
> +
> +static int pef2256_setup_gcm(struct pef2256 *pef2256)
> +{
> + return (pef2256->version == PEF2256_VERSION_1_2) ?
> + pef2256_12_setup_gcm(pef2256) : pef2256_2x_setup_gcm(pef2256);
> +}
> +
> +static int pef2256_setup_e1(struct pef2256 *pef2256)
> +{
> + u8 fmr1, fmr2, sic1;
> + int ret;
> +
> + /* Basic setup, Master clocking mode (GCM8..1) */
> + ret = pef2256_setup_gcm(pef2256);
> + if (ret)
> + return ret;
> +
> + /* RCLK output : DPLL clock, DCO-X enabled, DCO-X internal ref clock */
> + pef2256_write8(pef2256, PEF2256_CMR1, 0x00);
> +
> + /*
> + * SCLKR selected, SCLKX selected,
> + * receive synchro pulse sourced by SYPR,
> + * transmit synchro pulse sourced by SYPX
> + */
> + pef2256_write8(pef2256, PEF2256_CMR2, 0x00);
> +
> + /* NRZ coding, no alarm simulation */
> + pef2256_write8(pef2256, PEF2256_FMR0, 0x00);
> +
> + /*
> + * E1, frame format, 2 Mbit/s system data rate, no AIS
> + * transmission to remote end or system interface, payload loop
> + * off, transmit remote alarm on
> + */
> + fmr1 = 0x00;
> + fmr2 = PEF2256_FMR2_AXRA;
> + switch (pef2256->frame_type) {
> + case PEF2256_FRAME_E1_DOUBLEFRAME:
> + fmr2 |= PEF2256_FMR2_RFS_DOUBLEFRAME;
> + break;
> + case PEF2256_FRAME_E1_CRC4_MULTIFRAME:
> + fmr1 |= PEF2256_FMR1_XFS;
> + fmr2 |= PEF2256_FMR2_RFS_CRC4_MULTIFRAME;
> + break;
> + case PEF2256_FRAME_E1_AUTO_MULTIFRAME:
> + fmr1 |= PEF2256_FMR1_XFS;
> + fmr2 |= PEF2256_FMR2_RFS_AUTO_MULTIFRAME;
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported frame type %d\n", pef2256->frame_type);
> + return -EINVAL;
> + }
> + pef2256_write8(pef2256, PEF2256_FMR1, fmr1);
> + pef2256_write8(pef2256, PEF2256_FMR2, fmr2);
> +
> + /* E1 default for the receive slicer threshold */
> + pef2256_write8(pef2256, PEF2256_LIM2, PEF2256_LIM2_SLT_THR50);
> + if (!pef2256->is_subordinate) {
> + /* SEC input, active high */
> + pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_SEC_IN_HIGH);
> + } else {
> + /* Loop-timed */
> + pef2256_setbits8(pef2256, PEF2256_LIM2, PEF2256_LIM2_ELT);
> + /* FSC output, active high */
> + pef2256_write8(pef2256, PEF2256_GPC1, PEF2256_GPC1_CSFP_FSC_OUT_HIGH);
> + }
> +
> + /* internal second timer, power on */
> + pef2256_write8(pef2256, PEF2256_GCR, 0x00);
> +
> + /*
> + * slave mode, local loop off, mode short-haul
> + * In v2.x, bit3 is a forced 1 bit in the datasheet -> Need to be set.
> + */
> + if (pef2256->version == PEF2256_VERSION_1_2)
> + pef2256_write8(pef2256, PEF2256_LIM0, 0x00);
> + else
> + pef2256_write8(pef2256, PEF2256_LIM0, PEF2256_2X_LIM0_BIT3);
> +
> + /* analog interface selected, remote loop off */
> + pef2256_write8(pef2256, PEF2256_LIM1, 0x00);
> +
> + /*
> + * SCLKR, SCLKX, RCLK configured to inputs,
> + * XFMS active low, CLK1 and CLK2 pin configuration
> + */
> + pef2256_write8(pef2256, PEF2256_PC5, 0x00);
> + pef2256_write8(pef2256, PEF2256_PC6, 0x00);
> +
> + /*
> + * 2.048 MHz system clocking rate, receive buffer 2 frames, transmit
> + * buffer bypass, data sampled and transmitted on the falling edge of
> + * SCLKR/X, automatic freeze signaling, data is active in the first
> + * channel phase
> + */
> + pef2256_write8(pef2256, PEF2256_SIC1, 0x00);
> + pef2256_write8(pef2256, PEF2256_SIC2, 0x00);
> + pef2256_write8(pef2256, PEF2256_SIC3, 0x00);
> +
> + /* channel loop-back and single frame mode are disabled */
> + pef2256_write8(pef2256, PEF2256_LOOP, 0x00);
> +
> + /* all bits of the transmitted service word are cleared */
> + pef2256_write8(pef2256, PEF2256_XSW, PEF2256_XSW_XY(0x1F));
> + /* CAS disabled and clear spare bit values */
> + pef2256_write8(pef2256, PEF2256_XSP, 0x00);
> +
> + /* no transparent mode active */
> + pef2256_write8(pef2256, PEF2256_TSWM, 0x00);
> +
> + /*
> + * the transmit clock offset is cleared
> + * the transmit time slot offset is cleared
> + */
> + pef2256_write8(pef2256, PEF2256_XC0, 0x00);
> +
> + /* Keep default value for the transmit offset */
> + pef2256_write8(pef2256, PEF2256_XC1, 0x9C);
> +
> + /*
> + * transmit pulse mask, default value from datasheet
> + * transmitter in tristate mode
> + */
> + if (pef2256->version == PEF2256_VERSION_1_2) {
> + pef2256_write8(pef2256, PEF2256_XPM0, 0x7B);
> + pef2256_write8(pef2256, PEF2256_XPM1, 0x03);
> + pef2256_write8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT | 0x00);
> + } else {
> + pef2256_write8(pef2256, PEF2256_XPM0, 0x9C);
> + pef2256_write8(pef2256, PEF2256_XPM1, 0x03);
> + pef2256_write8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT | 0x00);
> + }
Only first line seem different, could XPM1 and XPM2 be outside the if/else ?
> +
> + /* "master" mode */
> + if (!pef2256->is_subordinate)
> + pef2256_setbits8(pef2256, PEF2256_LIM0, PEF2256_LIM0_MAS);
> +
> + /* transmit line in normal operation */
> + pef2256_clrbits8(pef2256, PEF2256_XPM2, PEF2256_XPM2_XLT);
> +
> + if (pef2256->version == PEF2256_VERSION_1_2) {
> + /* receive input threshold = 0,21V */
> + pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_12_LIM1_RIL_MASK,
> + PEF2256_12_LIM1_RIL_210);
> + } else {
> + /* receive input threshold = 0,21V */
Same comment twice, could be before the 'if' and remove the { } then ?
> + pef2256_clrsetbits8(pef2256, PEF2256_LIM1, PEF2256_2X_LIM1_RIL_MASK,
> + PEF2256_2X_LIM1_RIL_210);
> + }
> + /* transmit line coding = HDB3 */
> + pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_XC_MASK,
> + PEF2256_FMR0_XC_HDB3);
Wouldn't that fit in a single line with the new recommended 100 char max
line length ? I thing it would be more readable as a single line.
> +
> + /* receive line coding = HDB3 */
> + pef2256_clrsetbits8(pef2256, PEF2256_FMR0, PEF2256_FMR0_RC_MASK,
> + PEF2256_FMR0_RC_HDB3);
> +
> + /* detection of LOS alarm = 176 pulses (ie (10 + 1) * 16) */
> + pef2256_write8(pef2256, PEF2256_PCD, 10);
> +
> + /* recovery of LOS alarm = 22 pulses (ie 21 + 1) */
> + pef2256_write8(pef2256, PEF2256_PCR, 21);
> +
> + /* DCO-X center frequency enabled */
> + pef2256_setbits8(pef2256, PEF2256_CMR2, PEF2256_CMR2_DCOXC);
> +
> + if (pef2256->is_subordinate) {
> + /* select RCLK source = 2M */
> + pef2256_clrsetbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_RS_MASK,
> + PEF2256_CMR1_RS_DCOR_2048);
> + /* disable switching from RCLK to SYNC */
> + pef2256_setbits8(pef2256, PEF2256_CMR1, PEF2256_CMR1_DCS);
> + }
I'd move the comments into a single one before the 'if', the two
comments are related.
> +
> + if (pef2256->version != PEF2256_VERSION_1_2) {
> + /* during inactive channel phase switch RDO/RSIG into tri-state */
> + pef2256_setbits8(pef2256, PEF2256_SIC3, PEF2256_SIC3_RTRI);
> + }
I'd put the comment before the 'if' and remove the { }
> +
> + if (!pef2256->is_tx_falling_edge) {
> + /* rising edge sync pulse transmit */
This comment doesn't seem to match the condition (rising versus falling).
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC3,
> + PEF2256_SIC3_RESR, PEF2256_SIC3_RESX);
> + } else {
> + /* rising edge sync pulse receive */
This comment doesn't seem to match the condition (receive versus tx).
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC3,
> + PEF2256_SIC3_RESX, PEF2256_SIC3_RESR);
> + }
> +
> + /* transmit offset counter (XCO10..0) = 4 */
> + pef2256_write8(pef2256, PEF2256_XC0, 0);
> + pef2256_write8(pef2256, PEF2256_XC1, 4);
> + /* receive offset counter (RCO10..0) = 4 */
> + pef2256_write8(pef2256, PEF2256_RC0, 0);
> + pef2256_write8(pef2256, PEF2256_RC1, 4);
> +
> + /* system clock rate */
> + switch (pef2256->sysclk_rate) {
> + case 2048000:
> + sic1 = PEF2256_SIC1_SSC_2048;
> + break;
> + case 4096000:
> + sic1 = PEF2256_SIC1_SSC_4096;
> + break;
> + case 8192000:
> + sic1 = PEF2256_SIC1_SSC_8192;
> + break;
> + case 16384000:
> + sic1 = PEF2256_SIC1_SSC_16384;
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported sysclk rate %u\n", pef2256->sysclk_rate);
> + return -EINVAL;
> + }
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSC_MASK, sic1);
> +
> + /* data clock rate */
> + switch (pef2256->data_rate) {
> + case 2048000:
> + fmr1 = PEF2256_FMR1_SSD_2048;
> + sic1 = PEF2256_SIC1_SSD_2048;
> + break;
> + case 4096000:
> + fmr1 = PEF2256_FMR1_SSD_4096;
> + sic1 = PEF2256_SIC1_SSD_4096;
> + break;
> + case 8192000:
> + fmr1 = PEF2256_FMR1_SSD_8192;
> + sic1 = PEF2256_SIC1_SSD_8192;
> + break;
> + case 16384000:
> + fmr1 = PEF2256_FMR1_SSD_16384;
> + sic1 = PEF2256_SIC1_SSD_16384;
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported data rate %u\n", pef2256->data_rate);
> + return -EINVAL;
> + }
> + pef2256_clrsetbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_SSD_MASK, fmr1);
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_SSD_MASK, sic1);
> +
> + /* channel phase */
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC2, PEF2256_SIC2_SICS_MASK,
> + PEF2256_SIC2_SICS(pef2256->channel_phase));
> +
> + if (pef2256->is_subordinate) {
> + /* transmit buffer size = 2 frames */
> + pef2256_clrsetbits8(pef2256, PEF2256_SIC1, PEF2256_SIC1_XBS_MASK,
> + PEF2256_SIC1_XBS_2FRAMES);
> + /* transmit transparent mode */
> + pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XTM);
> + }
Could this block get regrouped with the RX block depending on
is_subordinate ?
> +
> + /* error counter latched every 1s */
> + pef2256_setbits8(pef2256, PEF2256_FMR1, PEF2256_FMR1_ECM);
> + /* error counter mode COFA */
> + pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_ECMC);
> + /* errors in service words have no influence */
> + pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_SWD);
> + /* 4 consecutive incorrect FAS causes loss of sync */
> + pef2256_setbits8(pef2256, PEF2256_RC0, PEF2256_RC0_ASY4);
> + /* Si-Bit, Spare bit For International, FAS word */
> + pef2256_setbits8(pef2256, PEF2256_XSW, PEF2256_XSW_XSIS);
> + pef2256_setbits8(pef2256, PEF2256_XSP, PEF2256_XSP_XSIF);
> +
> + /* port RCLK is output */
> + pef2256_setbits8(pef2256, PEF2256_PC5, PEF2256_PC5_CRP);
> + /* status changed interrupt at both up and down */
> + pef2256_setbits8(pef2256, PEF2256_GCR, PEF2256_GCR_SCI);
> +
> + /* Clear any ISR2 pending interrupts and unmask needed interrupts */
> + pef2256_read8(pef2256, PEF2256_ISR2);
> + pef2256_clrbits8(pef2256, PEF2256_IMR2, PEF2256_INT2_LOS | PEF2256_INT2_AIS);
> +
> + /* reset lines */
> + pef2256_write8(pef2256, PEF2256_CMDR, PEF2256_CMDR_RRES | PEF2256_CMDR_XRES);
> + return 0;
> +}
> +
> +static int pef2256_setup(struct pef2256 *pef2256)
> +{
> + if (!pef2256->is_e1) {
> + dev_err(pef2256->dev, "Only E1 line is currently supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + return pef2256_setup_e1(pef2256);
In order to use future addition of other modes, I'd do:
if (!pef2256->is_e1)
return pef2256_setup_e1(pef2256);
dev_err(pef2256->dev, "Only E1 line is currently supported\n");
return -EOPNOTSUPP;
> +}
> +
> +
> +
> +static void pef2256_isr_default_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
> +{
> + dev_warn(pef2256->dev, "ISR%u: 0x%02x not handled\n", nbr, isr);
> +}
> +
> +static bool pef2256_is_carrier_on(struct pef2256 *pef2256)
> +{
> + u8 frs0;
> +
> + frs0 = pef2256_read8(pef2256, PEF2256_FRS0);
> + return !(frs0 & (PEF2256_FRS0_LOS | PEF2256_FRS0_AIS));
> +}
> +
> +static void pef2256_isr2_handler(struct pef2256 *pef2256, u8 nbr, u8 isr)
> +{
> + bool is_changed = false;
> + unsigned long flags;
> + bool is_carrier_on;
> +
> + if (isr & (PEF2256_INT2_LOS | PEF2256_INT2_AIS)) {
> +
> + spin_lock_irqsave(&pef2256->lock, flags);
> + is_carrier_on = pef2256_is_carrier_on(pef2256);
> + if (is_carrier_on != pef2256->is_carrier_on) {
> + pef2256->is_carrier_on = is_carrier_on;
> + is_changed = true;
> + }
> + spin_unlock_irqrestore(&pef2256->lock, flags);
Do we really need spin_locks for that ?
If atomicity is really an issue, may we use atomic operations instead ?
> +
> + if (is_changed)
> + atomic_notifier_call_chain(&pef2256->event_notifier_list,
> + PEF2256_EVENT_CARRIER, NULL);
> + }
> +}
> +
> +static irqreturn_t pef2256_irq_handler(int irq, void *priv)
> +{
> + void (*pef2256_isr_handler[])(struct pef2256 *, u8, u8) = {
> + [0] = pef2256_isr_default_handler,
> + [1] = pef2256_isr_default_handler,
> + [2] = pef2256_isr2_handler,
> + [3] = pef2256_isr_default_handler,
> + [4] = pef2256_isr_default_handler,
> + [5] = pef2256_isr_default_handler
> + };
> + struct pef2256 *pef2256 = (struct pef2256 *)priv;
> + u8 gis;
> + u8 isr;
> + u8 n;
> +
> + gis = pef2256_read8(pef2256, PEF2256_GIS);
> +
> + for (n = 0; n < ARRAY_SIZE(pef2256_isr_handler) ; n++) {
> + if (gis & PEF2256_GIS_ISR(n)) {
> + isr = pef2256_read8(pef2256, PEF2256_ISR(n));
> + pef2256_isr_handler[n](pef2256, n, isr);
> + }
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int pef2256_check_rates(struct pef2256 *pef2256, unsigned long sysclk_rate,
> + unsigned long data_rate)
> +{
> + unsigned long rate;
> +
> + switch (sysclk_rate) {
> + case 2048000:
> + case 4096000:
> + case 8192000:
> + case 16384000:
> + break;
> + default:
> + dev_err(pef2256->dev, "Unsupported system clock rate %lu\n", sysclk_rate);
> + return -EINVAL;
> + }
> +
> + for (rate = data_rate; rate <= data_rate * 4; rate *= 2) {
> + if (rate == sysclk_rate)
> + return 0;
> + }
> + dev_err(pef2256->dev, "Unsupported data rate %lu with system clock rate %lu\n",
> + data_rate, sysclk_rate);
> + return -EINVAL;
> +}
> +
> +static int pef2556_of_parse(struct pef2256 *pef2256, struct device_node *np)
> +{
> + const char *str;
> + int ret;
> +
> + str = "e1";
> + ret = of_property_read_string(np, "lantiq,line-interface", &str);
> + if (ret && ret != -EINVAL) {
> + dev_err(pef2256->dev, "%pOF: failed to read lantiq,line-interface\n",
> + np);
> + return ret;
> + }
> + if (!strcmp(str, "e1")) {
> + pef2256->is_e1 = true;
> + } else if (!strcmp(str, "t1j1")) {
> + pef2256->is_e1 = false;
> + } else {
> + dev_err(pef2256->dev, "%pOF: Invalid lantiq,line-interface (%s)\n",
> + np, str);
> + return -EINVAL;
> + }
> + dev_dbg(pef2256->dev, "config: %s line\n", pef2256->is_e1 ? "E1" : "T1/J1");
> +
> + pef2256->sysclk_rate = 2048000;
> + ret = of_property_read_u32(np, "lantiq,sysclk-rate-hz", &pef2256->sysclk_rate);
> + if (ret && ret != -EINVAL) {
> + dev_err(pef2256->dev, "%pOF: failed to read lantiq,sysclk-rate-hz\n", np);
> + return ret;
> + }
> + dev_dbg(pef2256->dev, "config: sysclk %u Hz\n", pef2256->sysclk_rate);
> +
> + pef2256->data_rate = 2048000;
> + ret = of_property_read_u32(np, "lantiq,data-rate-bps", &pef2256->data_rate);
> + if (ret && ret != -EINVAL) {
> + dev_err(pef2256->dev, "%pOF: failed to read lantiq,data-rate-bps\n", np);
> + return ret;
> + }
> + dev_dbg(pef2256->dev, "config: data rate %u bps\n", pef2256->data_rate);
> +
> + ret = pef2256_check_rates(pef2256, pef2256->sysclk_rate, pef2256->data_rate);
> + if (ret)
> + return ret;
> +
> + pef2256->is_tx_falling_edge = of_property_read_bool(np, "lantiq,clock-falling-edge");
> + dev_dbg(pef2256->dev, "config: tx on %s edge\n",
> + pef2256->is_tx_falling_edge ? "falling" : "rising");
> +
> + pef2256->is_subordinate = of_property_read_bool(np, "lantiq,subordinate");
> + dev_dbg(pef2256->dev, "config: subordinate %s\n",
> + pef2256->is_subordinate ? "on" : "off");
> +
> + str = pef2256->is_e1 ? "doubleframe" : "12frame";
> + ret = of_property_read_string(np, "lantiq,frame-format", &str);
> + if (ret && ret != -EINVAL) {
> + dev_err(pef2256->dev, "%pOF: failed to read lantiq,frame-format\n",
> + np);
> + return ret;
> + }
> + if (pef2256->is_e1) {
> + if (!strcmp(str, "doubleframe")) {
> + pef2256->frame_type = PEF2256_FRAME_E1_DOUBLEFRAME;
> + } else if (!strcmp(str, "crc4-multiframe")) {
> + pef2256->frame_type = PEF2256_FRAME_E1_CRC4_MULTIFRAME;
> + } else if (!strcmp(str, "auto-multiframe")) {
> + pef2256->frame_type = PEF2256_FRAME_E1_AUTO_MULTIFRAME;
> + } else {
> + dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
> + np, str);
> + return -EINVAL;
> + }
> + } else {
> + if (!strcmp(str, "4frame")) {
> + pef2256->frame_type = PEF2256_FRAME_T1J1_4FRAME;
> + } else if (!strcmp(str, "12frame")) {
> + pef2256->frame_type = PEF2256_FRAME_T1J1_12FRAME;
> + } else if (!strcmp(str, "24frame")) {
> + pef2256->frame_type = PEF2256_FRAME_T1J1_24FRAME;
> + } else if (!strcmp(str, "72frame")) {
> + pef2256->frame_type = PEF2256_FRAME_T1J1_72FRAME;
> + } else {
> + dev_err(pef2256->dev, "%pOF: Invalid lantiq,frame-format (%s)\n",
> + np, str);
> + return -EINVAL;
> + }
> + }
> + dev_dbg(pef2256->dev, "config: frame type %d\n", pef2256->frame_type);
> +
> + pef2256->channel_phase = 0;
> + ret = of_property_read_u8(np, "lantiq,channel-phase", &pef2256->channel_phase);
> + if (ret && ret != -EINVAL) {
> + dev_err(pef2256->dev, "%pOF: failed to read lantiq,channel-phase\n",
> + np);
> + return ret;
> + }
> + if (pef2256->channel_phase >= pef2256->sysclk_rate / pef2256->data_rate) {
> + dev_err(pef2256->dev, "%pOF: Invalid lantiq,channel-phase %u\n",
> + np, pef2256->channel_phase);
> + return -EINVAL;
> + }
> + dev_dbg(pef2256->dev, "config: channel phase %u\n", pef2256->channel_phase);
> +
> + return 0;
> +}
> +
> +static int pef2256_get_groups_count(struct pinctrl_dev *pctldev)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + /* We map 1 group <-> 1 pin */
> + return pef2256->pinctrl.pctrl_desc.npins;
> +}
> +
> +static const char *pef2256_get_group_name(struct pinctrl_dev *pctldev,
> + unsigned int selector)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + /* We map 1 group <-> 1 pin */
> + return pef2256->pinctrl.pctrl_desc.pins[selector].name;
> +}
> +
> +static int pef2256_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
> + const unsigned int **pins,
> + unsigned int *num_pins)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + /* We map 1 group <-> 1 pin */
> + *pins = &pef2256->pinctrl.pctrl_desc.pins[selector].number;
> + *num_pins = 1;
> +
> + return 0;
> +}
> +
> +static const struct pinctrl_ops pef2256_pctlops = {
> + .get_groups_count = pef2256_get_groups_count,
> + .get_group_name = pef2256_get_group_name,
> + .get_group_pins = pef2256_get_group_pins,
> + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
> + .dt_free_map = pinconf_generic_dt_free_map,
> +};
> +
> +static int pef2256_get_functions_count(struct pinctrl_dev *pctldev)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pef2256->pinctrl.nfunctions;
> +}
> +
> +static const char *pef2256_get_function_name(struct pinctrl_dev *pctldev,
> + unsigned int selector)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pef2256->pinctrl.functions[selector].name;
> +}
> +
> +
> +static int pef2256_get_function_groups(struct pinctrl_dev *pctldev, unsigned int selector,
> + const char * const **groups,
> + unsigned * const num_groups)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> +
> + *groups = pef2256->pinctrl.functions[selector].groups;
> + *num_groups = pef2256->pinctrl.functions[selector].ngroups;
> + return 0;
> +}
> +
> +static int pef2256_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
> + unsigned int group_selector)
> +{
> + struct pef2256 *pef2256 = pinctrl_dev_get_drvdata(pctldev);
> + const struct pef2256_pinreg_desc *pinreg_desc;
> + u8 func_val;
> +
> + dev_dbg(pef2256->dev, "set %s to %s function\n",
> + pef2256->pinctrl.pctrl_desc.pins[group_selector].name,
> + pef2256->pinctrl.functions[func_selector].name);
> +
> + /* We map 1 group <-> 1 pin */
> + pinreg_desc = pef2256->pinctrl.pctrl_desc.pins[group_selector].drv_data;
> + func_val = pef2256->pinctrl.functions[func_selector].func_val;
> +
> + pef2256_clrsetbits8(pef2256, pinreg_desc->offset, pinreg_desc->mask,
> + func_val & pinreg_desc->mask);
> +
> + return 0;
> +}
> +
> +static const struct pinmux_ops pef2256_pmxops = {
> + .get_functions_count = pef2256_get_functions_count,
> + .get_function_name = pef2256_get_function_name,
> + .get_function_groups = pef2256_get_function_groups,
> + .set_mux = pef2256_set_mux,
> +};
> +
> +#define PEF2256_PINCTRL_PIN(_number, _name, _offset, _mask) { \
> + .number = _number, \
> + .name = _name, \
> + .drv_data = &(struct pef2256_pinreg_desc) { \
> + .offset = _offset, \
> + .mask = _mask, \
> + }, \
> +}
> +
> +static const struct pinctrl_pin_desc pef2256_v12_pins[] = {
> + PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_12_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_12_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_12_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_12_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_12_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_12_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_12_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_12_PC_XPC_MASK),
> +};
> +
> +static const struct pinctrl_pin_desc pef2256_v2x_pins[] = {
> + PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_2X_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_2X_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_2X_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_2X_PC_RPC_MASK),
> + PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_2X_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_2X_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_2X_PC_XPC_MASK),
> + PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_2X_PC_XPC_MASK),
> +};
> +
> +static const char *const pef2256_rp_groups[] = { "RPA", "RPB", "RPC", "RPD" };
> +static const char *const pef2256_xp_groups[] = { "XPA", "XPB", "XPC", "XPD" };
> +static const char *const pef2256_all_groups[] = { "RPA", "RPB", "RPC", "RPD",
> + "XPA", "XPB", "XPC", "XPD" };
> +
> +#define PEF2256_FUNCTION(_name, _func_val, _groups) { \
> + .name = _name, \
> + .groups = _groups, \
> + .ngroups = ARRAY_SIZE(_groups), \
> + .func_val = _func_val, \
> +}
> +
> +static const struct pef2256_function_desc pef2256_v2x_functions[] = {
> + PEF2256_FUNCTION("SYPR", PEF2256_2X_PC_RPC_SYPR, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFM", PEF2256_2X_PC_RPC_RFM, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFMB", PEF2256_2X_PC_RPC_RFMB, pef2256_rp_groups),
> + PEF2256_FUNCTION("RSIGM", PEF2256_2X_PC_RPC_RSIGM, pef2256_rp_groups),
> + PEF2256_FUNCTION("RSIG", PEF2256_2X_PC_RPC_RSIG, pef2256_rp_groups),
> + PEF2256_FUNCTION("DLR", PEF2256_2X_PC_RPC_DLR, pef2256_rp_groups),
> + PEF2256_FUNCTION("FREEZE", PEF2256_2X_PC_RPC_FREEZE, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFSP", PEF2256_2X_PC_RPC_RFSP, pef2256_rp_groups),
> + PEF2256_FUNCTION("LOS", PEF2256_2X_PC_RPC_LOS, pef2256_rp_groups),
> +
> + PEF2256_FUNCTION("SYPX", PEF2256_2X_PC_XPC_SYPX, pef2256_xp_groups),
> + PEF2256_FUNCTION("XFMS", PEF2256_2X_PC_XPC_XFMS, pef2256_xp_groups),
> + PEF2256_FUNCTION("XSIG", PEF2256_2X_PC_XPC_XSIG, pef2256_xp_groups),
> + PEF2256_FUNCTION("TCLK", PEF2256_2X_PC_XPC_TCLK, pef2256_xp_groups),
> + PEF2256_FUNCTION("XMFB", PEF2256_2X_PC_XPC_XMFB, pef2256_xp_groups),
> + PEF2256_FUNCTION("XSIGM", PEF2256_2X_PC_XPC_XSIGM, pef2256_xp_groups),
> + PEF2256_FUNCTION("DLX", PEF2256_2X_PC_XPC_DLX, pef2256_xp_groups),
> + PEF2256_FUNCTION("XCLK", PEF2256_2X_PC_XPC_XCLK, pef2256_xp_groups),
> + PEF2256_FUNCTION("XLT", PEF2256_2X_PC_XPC_XLT, pef2256_xp_groups),
> +
> + PEF2256_FUNCTION("GPI", PEF2256_2X_PC_RPC_GPI | PEF2256_2X_PC_XPC_GPI,
> + pef2256_all_groups),
> + PEF2256_FUNCTION("GPOH", PEF2256_2X_PC_RPC_GPOH | PEF2256_2X_PC_XPC_GPOH,
> + pef2256_all_groups),
> + PEF2256_FUNCTION("GPOL", PEF2256_2X_PC_RPC_GPOL | PEF2256_2X_PC_XPC_GPOL,
> + pef2256_all_groups),
> +};
> +
> +static const struct pef2256_function_desc pef2256_v12_functions[] = {
> + PEF2256_FUNCTION("SYPR", PEF2256_12_PC_RPC_SYPR, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFM", PEF2256_12_PC_RPC_RFM, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFMB", PEF2256_12_PC_RPC_RFMB, pef2256_rp_groups),
> + PEF2256_FUNCTION("RSIGM", PEF2256_12_PC_RPC_RSIGM, pef2256_rp_groups),
> + PEF2256_FUNCTION("RSIG", PEF2256_12_PC_RPC_RSIG, pef2256_rp_groups),
> + PEF2256_FUNCTION("DLR", PEF2256_12_PC_RPC_DLR, pef2256_rp_groups),
> + PEF2256_FUNCTION("FREEZE", PEF2256_12_PC_RPC_FREEZE, pef2256_rp_groups),
> + PEF2256_FUNCTION("RFSP", PEF2256_12_PC_RPC_RFSP, pef2256_rp_groups),
> +
> + PEF2256_FUNCTION("SYPX", PEF2256_12_PC_XPC_SYPX, pef2256_xp_groups),
> + PEF2256_FUNCTION("XFMS", PEF2256_12_PC_XPC_XFMS, pef2256_xp_groups),
> + PEF2256_FUNCTION("XSIG", PEF2256_12_PC_XPC_XSIG, pef2256_xp_groups),
> + PEF2256_FUNCTION("TCLK", PEF2256_12_PC_XPC_TCLK, pef2256_xp_groups),
> + PEF2256_FUNCTION("XMFB", PEF2256_12_PC_XPC_XMFB, pef2256_xp_groups),
> + PEF2256_FUNCTION("XSIGM", PEF2256_12_PC_XPC_XSIGM, pef2256_xp_groups),
> + PEF2256_FUNCTION("DLX", PEF2256_12_PC_XPC_DLX, pef2256_xp_groups),
> + PEF2256_FUNCTION("XCLK", PEF2256_12_PC_XPC_XCLK, pef2256_xp_groups),
> + PEF2256_FUNCTION("XLT", PEF2256_12_PC_XPC_XLT, pef2256_xp_groups),
> +};
> +
> +
> +static int pef2256_register_pinctrl(struct pef2256 *pef2256)
> +{
> + struct pinctrl_dev *pctrl;
> +
> + pef2256->pinctrl.pctrl_desc.name = dev_name(pef2256->dev);
> + pef2256->pinctrl.pctrl_desc.owner = THIS_MODULE;
> + pef2256->pinctrl.pctrl_desc.pctlops = &pef2256_pctlops;
> + pef2256->pinctrl.pctrl_desc.pmxops = &pef2256_pmxops;
> + if (pef2256->version == PEF2256_VERSION_1_2) {
> + pef2256->pinctrl.pctrl_desc.pins = pef2256_v12_pins;
> + pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v12_pins);
> + pef2256->pinctrl.functions = pef2256_v12_functions;
> + pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v12_functions);
> + } else {
> + pef2256->pinctrl.pctrl_desc.pins = pef2256_v2x_pins;
> + pef2256->pinctrl.pctrl_desc.npins = ARRAY_SIZE(pef2256_v2x_pins);
> + pef2256->pinctrl.functions = pef2256_v2x_functions;
> + pef2256->pinctrl.nfunctions = ARRAY_SIZE(pef2256_v2x_functions);
> + }
> +
> +
> + pctrl = devm_pinctrl_register(pef2256->dev, &pef2256->pinctrl.pctrl_desc, pef2256);
> + if (IS_ERR(pctrl)) {
> + dev_err(pef2256->dev, "pinctrl driver registration failed\n");
> + return PTR_ERR(pctrl);
> + }
> +
> + return 0;
> +}
> +
> +static void pef2256_reset_pinmux(struct pef2256 *pef2256)
> +{
> + u8 val;
> + /*
> + * Reset values cannot be used.
> + * They define the SYPR/SYPX pin mux for all the RPx and XPx pins and
> + * Only one pin can be muxed to SYPR and one pin can be muxed to SYPX.
> + * Choose here an other reset value.
> + */
> + if (pef2256->version == PEF2256_VERSION_1_2)
> + val = PEF2256_12_PC_XPC_XCLK | PEF2256_12_PC_RPC_RFSP;
> + else
> + val = PEF2256_2X_PC_XPC_GPI | PEF2256_2X_PC_RPC_GPI;
> +
> + pef2256_write8(pef2256, PEF2256_PC1, val);
> + pef2256_write8(pef2256, PEF2256_PC2, val);
> + pef2256_write8(pef2256, PEF2256_PC3, val);
> + pef2256_write8(pef2256, PEF2256_PC4, val);
> +}
> +
> +static ssize_t subordinate_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct pef2256 *pef2256 = dev_get_drvdata(dev);
> +
> + return sysfs_emit(buf, "%d\n", pef2256->is_subordinate);
> +}
> +
> +static ssize_t subordinate_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct pef2256 *pef2256 = dev_get_drvdata(dev);
> + int ret;
> +
> + if (strtobool(buf, &pef2256->is_subordinate) < 0)
> + return -EINVAL;
> +
> + ret = pef2256_setup(pef2256);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(subordinate);
> +
> +static const struct attribute_group pef2256_attribute_group = {
> + .attrs = (struct attribute *[]) {
> + &dev_attr_subordinate.attr,
> + NULL,
> + },
> +};
> +
> +static int pef2256_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct pef2256 *pef2256;
> + int ret;
> + int irq;
> +
> + pef2256 = devm_kzalloc(&pdev->dev, sizeof(*pef2256), GFP_KERNEL);
> + if (!pef2256)
> + return -ENOMEM;
> +
> + pef2256->dev = &pdev->dev;
> + spin_lock_init(&pef2256->lock);
> + ATOMIC_INIT_NOTIFIER_HEAD(&pef2256->event_notifier_list);
> +
> + pef2256->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(pef2256->regs))
> + return PTR_ERR(pef2256->regs);
> +
> + pef2256->mclk = devm_clk_get_enabled(&pdev->dev, "mclk");
> + if (IS_ERR(pef2256->mclk))
> + return PTR_ERR(pef2256->mclk);
> + dev_dbg(pef2256->dev, "mclk %lu Hz\n", clk_get_rate(pef2256->mclk));
> +
> + /* Reset the component. The MCLK clock must be active during reset */
> + pef2256->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pef2256->reset_gpio))
> + return PTR_ERR(pef2256->reset_gpio);
> + if (pef2256->reset_gpio) {
> + gpiod_set_value_cansleep(pef2256->reset_gpio, 1);
> + udelay(10);
> + gpiod_set_value_cansleep(pef2256->reset_gpio, 0);
> + udelay(10);
> + }
> +
> + pef2256->version = pef2256_get_version(pef2256);
> + if (pef2256->version == PEF2256_VERSION_UNKNOWN)
> + return -ENODEV;
> +
> + ret = pef2556_of_parse(pef2256, np);
> + if (ret)
> + return ret;
> +
> + /* Disable interrupts */
> + pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
> +
> + /* Clear any pending interrupts */
> + pef2256_read8(pef2256, PEF2256_ISR0);
> + pef2256_read8(pef2256, PEF2256_ISR1);
> + pef2256_read8(pef2256, PEF2256_ISR2);
> + pef2256_read8(pef2256, PEF2256_ISR3);
> + pef2256_read8(pef2256, PEF2256_ISR4);
> + pef2256_read8(pef2256, PEF2256_ISR5);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> + ret = devm_request_irq(pef2256->dev, irq, pef2256_irq_handler, 0, "pef2256", pef2256);
> + if (ret < 0)
> + return ret;
> +
> + pef2256_reset_pinmux(pef2256);
> + ret = pef2256_register_pinctrl(pef2256);
> + if (ret)
> + return ret;
> +
> + /*
> + * We are going to reset the E1 lines during setup() call and the ISR2
> + * interrupt used to detect the carrier state changed is masked.
> + * It is time to initialize our internal carrier state flag.
> + */
> + pef2256->is_carrier_on = false;
> +
> + ret = pef2256_setup(pef2256);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, pef2256);
> +
> + ret = sysfs_create_group(&pef2256->dev->kobj, &pef2256_attribute_group);
> + if (ret < 0) {
> + dev_err(pef2256->dev, "sysfs registration failed (%d)\n", ret);
> + platform_set_drvdata(pdev, NULL);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int pef2256_remove(struct platform_device *pdev)
> +{
> + struct pef2256 *pef2256 = platform_get_drvdata(pdev);
> +
> + /* Disable interrupts */
> + pef2256_write8(pef2256, PEF2256_IMR0, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR1, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR2, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR3, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR4, 0xff);
> + pef2256_write8(pef2256, PEF2256_IMR5, 0xff);
> +
> + sysfs_remove_group(&pef2256->dev->kobj, &pef2256_attribute_group);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id pef2256_id_table[] = {
> + { .compatible = "lantiq,pef2256" },
> + {} /* sentinel */
> +};
> +MODULE_DEVICE_TABLE(of, pef2256_id_table);
> +
> +static struct platform_driver pef2256_driver = {
> + .driver = {
> + .name = "lantiq-pef2256",
> + .of_match_table = of_match_ptr(pef2256_id_table),
> + },
> + .probe = pef2256_probe,
> + .remove = pef2256_remove,
> +};
> +module_platform_driver(pef2256_driver);
> +
> +struct pef2256 *pef2256_get_byphandle(struct device_node *np, const char *phandle_name)
> +{
> + struct device_node *pef2256_np;
> + struct platform_device *pdev;
> + struct pef2256 *pef2256;
> +
> + pef2256_np = of_parse_phandle(np, phandle_name, 0);
> + if (!pef2256_np)
> + return ERR_PTR(-EINVAL);
> +
> + if (!of_match_node(pef2256_driver.driver.of_match_table, pef2256_np)) {
> + of_node_put(pef2256_np);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + pdev = of_find_device_by_node(pef2256_np);
> + of_node_put(pef2256_np);
> + if (!pdev)
> + return ERR_PTR(-ENODEV);
> +
> + pef2256 = platform_get_drvdata(pdev);
> + if (!pef2256) {
> + platform_device_put(pdev);
> + return ERR_PTR(-EPROBE_DEFER);
> + }
> +
> + return pef2256;
> +}
> +EXPORT_SYMBOL(pef2256_get_byphandle);
> +
> +void pef2256_put(struct pef2256 *pef2256)
> +{
> + put_device(pef2256->dev);
> +}
> +EXPORT_SYMBOL(pef2256_put);
> +
> +static void devm_pef2256_release(struct device *dev, void *res)
> +{
> + struct pef2256 **pef2256 = res;
> +
> + pef2256_put(*pef2256);
> +}
> +
> +struct pef2256 *devm_pef2256_get_byphandle(struct device *dev, struct device_node *np,
> + const char *phandle_name)
> +{
> + struct pef2256 *pef2256;
> + struct pef2256 **dr;
> +
> + dr = devres_alloc(devm_pef2256_release, sizeof(*dr), GFP_KERNEL);
> + if (!dr)
> + return ERR_PTR(-ENOMEM);
> +
> + pef2256 = pef2256_get_byphandle(np, phandle_name);
> + if (!IS_ERR(pef2256)) {
> + *dr = pef2256;
> + devres_add(dev, dr);
> + } else {
> + devres_free(dr);
> + }
> +
> + return pef2256;
> +}
> +EXPORT_SYMBOL(devm_pef2256_get_byphandle);
> +
> +int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
> +{
> + return atomic_notifier_chain_register(&pef2256->event_notifier_list, nb);
> +}
> +EXPORT_SYMBOL_GPL(pef2256_register_event_notifier);
> +
> +int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb)
> +{
> + return atomic_notifier_chain_unregister(&pef2256->event_notifier_list, nb);
> +}
> +EXPORT_SYMBOL_GPL(pef2256_unregister_event_notifier);
> +
> +bool pef2256_get_carrier(struct pef2256 *pef2256)
> +{
> + unsigned long flags;
> + bool is_carrier_on;
> +
> + spin_lock_irqsave(&pef2256->lock, flags);
> + is_carrier_on = pef2256->is_carrier_on;
> + spin_unlock_irqrestore(&pef2256->lock, flags);
> +
> + return is_carrier_on;
> +}
> +EXPORT_SYMBOL_GPL(pef2256_get_carrier);
> +
> +MODULE_AUTHOR("Herve Codina <herve.codina@...tlin.com>");
> +MODULE_DESCRIPTION("PEF2256 driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/pef2256.h b/include/linux/pef2256.h
> new file mode 100644
> index 000000000000..6c8d173595b1
> --- /dev/null
> +++ b/include/linux/pef2256.h
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * PEF2256 management
> + *
> + * Copyright 2023 CS GROUP France
> + *
> + * Author: Herve Codina <herve.codina@...tlin.com>
> + */
> +#ifndef __PEF2256_H__
> +#define __PEF2256_H__
> +
> +#include <linux/types.h>
> +
> +struct pef2256;
> +struct device_node;
> +struct device;
> +struct notifier_block;
> +
> +struct pef2256 *pef2256_get_byphandle(struct device_node *np, const char *phandle_name);
> +void pef2256_put(struct pef2256 *pef2256);
> +struct pef2256 *devm_pef2256_get_byphandle(struct device *dev, struct device_node *np,
> + const char *phandle_name);
> +
> +
> +enum pef2256_event {
> + PEF2256_EVENT_CARRIER, /* Carrier state changed */
> +};
> +
> +/* The nb.notifier_call function registered must not sleep */
> +int pef2256_register_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
> +int pef2256_unregister_event_notifier(struct pef2256 *pef2256, struct notifier_block *nb);
> +
> +/* Retrieve carrier state. true: carrier on, false: carrier off */
> +bool pef2256_get_carrier(struct pef2256 *pef2256);
> +
> +#endif /* __PEF2256_H__ */
Powered by blists - more mailing lists