| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <455440f4-7f2b-366e-53ec-700c3bb98534@kernel.org>
Date: Thu, 16 Mar 2023 16:04:19 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Md Danish Anwar <a0501179@...com>,
MD Danish Anwar <danishanwar@...com>,
"Andrew F. Davis" <afd@...com>, Suman Anna <s-anna@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Nishanth Menon <nm@...com>
Cc: linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, srk@...com, devicetree@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper
functions to set GPI mode, MII_RT_event and XFR
Hi,
On 16/03/2023 15:11, Md Danish Anwar wrote:
>
>
> On 16/03/23 17:49, Roger Quadros wrote:
>>
>>
>> On 16/03/2023 13:44, Md Danish Anwar wrote:
>>>
>>> On 16/03/23 17:06, Roger Quadros wrote:
>>>> Hi,
>>>>
>>>> On 16/03/2023 13:05, Md Danish Anwar wrote:
>>>>> Hi Roger,
>>>>>
>>>>> On 15/03/23 17:52, Roger Quadros wrote:
>>>>>>
>>>>>>
>>>>>> On 13/03/2023 13:11, MD Danish Anwar wrote:
>>>>>>> From: Suman Anna <s-anna@...com>
>>>>>>>
>>>>>>> The PRUSS CFG module is represented as a syscon node and is currently
>>>>>>> managed by the PRUSS platform driver. Add easy accessor functions to set
>>>>>>> GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
>>>>>>> to enable the PRUSS Ethernet usecase. These functions reuse the generic
>>>>>>> pruss_cfg_update() API function.
>>>>>>>
>>>>>>> Signed-off-by: Suman Anna <s-anna@...com>
>>>>>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>>>>>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>>>>>>> Signed-off-by: Puranjay Mohan <p-mohan@...com>
>>>>>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>>>>>> ---
>>>>>>> drivers/soc/ti/pruss.c | 60 ++++++++++++++++++++++++++++++++
>>>>>>> include/linux/remoteproc/pruss.h | 22 ++++++++++++
>>>>>>> 2 files changed, 82 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>>>>>>> index 26d8129b515c..2f04b7922ddb 100644
>>>>>>> --- a/drivers/soc/ti/pruss.c
>>>>>>> +++ b/drivers/soc/ti/pruss.c
>>>>>>> @@ -203,6 +203,66 @@ static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
>>>>>>> return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
>>>>>>> }
>>>>>>>
>>>>>>> +/**
>>>>>>> + * pruss_cfg_gpimode() - set the GPI mode of the PRU
>>>>>>> + * @pruss: the pruss instance handle
>>>>>>> + * @pru_id: id of the PRU core within the PRUSS
>>>>>>> + * @mode: GPI mode to set
>>>>>>> + *
>>>>>>> + * Sets the GPI mode for a given PRU by programming the
>>>>>>> + * corresponding PRUSS_CFG_GPCFGx register
>>>>>>> + *
>>>>>>> + * Return: 0 on success, or an error code otherwise
>>>>>>> + */
>>>>>>> +int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
>>>>>>> + enum pruss_gpi_mode mode)
>>>>>>> +{
>>>>>>> + if (pru_id < 0 || pru_id >= PRUSS_NUM_PRUS)
>>>>>>> + return -EINVAL;
>>>>>>> +
>>>>>>> + if (mode < 0 || mode > PRUSS_GPI_MODE_MAX)
>>>>>>> + return -EINVAL;
>>>>>>> +
>>>>>>> + return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
>>>>>>> + PRUSS_GPCFG_PRU_GPI_MODE_MASK,
>>>>>>> + mode << PRUSS_GPCFG_PRU_GPI_MODE_SHIFT);
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(pruss_cfg_gpimode);
>>>>>>> +
>>>>>>> +/**
>>>>>>> + * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
>>>>>>> + * @pruss: the pruss instance
>>>>>>> + * @enable: enable/disable
>>>>>>> + *
>>>>>>> + * Enable/disable the MII RT Events for the PRUSS.
>>>>>>> + *
>>>>>>> + * Return: 0 on success, or an error code otherwise
>>>>>>> + */
>>>>>>> +int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
>>>>>>> +{
>>>>>>> + u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
>>>>>>> +
>>>>>>> + return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
>>>>>>> + PRUSS_MII_RT_EVENT_EN, set);
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(pruss_cfg_miirt_enable);
>>>>>>> +
>>>>>>> +/**
>>>>>>> + * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
>>>>>>> + * @pruss: the pruss instance
>>>>>>> + * @enable: enable/disable
>>>>>>> + * @mask: Mask for PRU / RTU
>>>>>>
>>>>>> You should not expect the user to provide the mask but only
>>>>>> the core type e.g.
>>>>>>
>>>>>> enum pru_type {
>>>>>> PRU_TYPE_PRU = 0,
>>>>>> PRU_TYPE_RTU,
>>>>>> PRU_TYPE_TX_PRU,
>>>>>> PRU_TYPE_MAX,
>>>>>> };
>>>>>>
>>>>>> Then you figure out the mask in the function.
>>>>>> Also check for invalid pru_type and return error if so.
>>>>>>
>>>>>
>>>>> Sure Roger, I will create a enum and take it as parameter in API. Based on
>>>>> these enum I will calculate mask and do XFR shifting inside the API
>>>>> pruss_cfg_xfr_enable().
>>>>>
>>>>> There are two registers for XFR shift.
>>>>>
>>>>> #define PRUSS_SPP_XFER_SHIFT_EN BIT(1)
>>>>> #define PRUSS_SPP_RTU_XFR_SHIFT_EN BIT(3)
>>>>>
>>>>> For PRU XFR shifting, the mask should be PRUSS_SPP_XFER_SHIFT_EN,
>>>>> for RTU shifting mask should be PRUSS_SPP_RTU_XFR_SHIFT_EN and for PRU and RTU
>>>>> shifting mask should be (PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN)
>>>>>
>>>>> So the enum would be something like this.
>>>>>
>>>>> /**
>>>>> * enum xfr_shift_type - XFR shift type
>>>>> * @XFR_SHIFT_PRU: Enables XFR shift for PRU
>>>>> * @XFR_SHIFT_RTU: Enables XFR shift for RTU
>>>>> * @XFR_SHIFT_PRU_RTU: Enables XFR shift for both PRU and RTU
>>>>
>>>> This is not required. User can call the API twice. once for PRU and once for RTU.
>>>>
>>>>> * @XFR_SHIFT_MAX: Total number of XFR shift types available.
>>>>> *
>>>>> */
>>>>>
>>>>> enum xfr_shift_type {
>>>>> XFR_SHIFT_PRU = 0,
>>>>> XFR_SHIFT_RTU,
>>>>> XFR_SHIFT_PRU_RTU,
>>>>> XFR_SHIFT_MAX,
>>>>> };
>>>>
>>>> Why do you need this new enum definition?
>>>> We already have pru_type defined somewhere. You can move it to a public header
>>>> if not there yet.
>>>>
>>>> enum pru_type {
>>>> PRU_TYPE_PRU = 0,
>>>> PRU_TYPE_RTU,
>>>> PRU_TYPE_TX_PRU,
>>>> PRU_TYPE_MAX,
>>>> };
>>>>
>>>
>>> This enum is present in drivers/remoteproc/pru_rproc.c file. But the problem
>>> with this enum is that in [1] we need to enable XFR shift for both PRU and RTU
>>> for which the mask will be OR of PRUSS_SPP_XFER_SHIFT_EN (mask for PRU) and
>>> PRUSS_SPP_RTU_XFR_SHIFT_EN (mask of RTU).
>>
>> Is there any limitation that you have to enable both simultaneously?
>> The driver can first do enable for PRU and then later for RTU.
>>
>> As you will do a read modify write, the previous enable state of register
>> shouldn't be affected.
>>
>>>
>>> Now this enum doesn't have a field for both PRU and RTU. Also we don't need
>>> need the XFR shift for PRU_TYPE_TX_PRU as only two XFR shift register bits are
>>> defined.
>>
>> That is OK. You can return error if not RTU or PRU.
>>
>>>
>>> That is why I thought of introducing new enum.
>>>
>>> [1] drivers/net/ethernet/ti/icssg_config.c
>>>
>>> /* enable XFR shift for PRU and RTU */
>>> mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
>>
>> Driver can do like so
>>
>> pruss_cfg_xfr_enable(pruss, PRU_TYPE_PRU, true);
>> pruss_cfg_xfr_enable(pruss, PRU_TYPE_RTU, true);
>>
>> The second call should not disable the PRU XFR as you will do a
>> read-modify-write only affecting the RTU bit.
>
> Sure, then I will use the existing enum pru_type.
>
> The enum pru_type is currently in drivers/remoteproc/pruss.c I will move this
> enum definition from there to include/linux/remoteproc/pruss.h
There are 2 public pruss.h files.
include/linux/remoteproc/pruss.h
and
include/linux/pruss_driver.h
Why is that and when to use what?
cheers,
-roger
Powered by blists - more mailing lists