linux-kernel - Re: [PATCH v2 2/3] arm64: dts: imx8qxp: add cadence usb3 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3810738.Icojqenx9y@steina-w>
Date:   Fri, 17 Mar 2023 07:39:09 +0100
From:   Alexander Stein <alexander.stein@...tq-group.com>
To:     shawnguo@...nel.org, linux-arm-kernel@...ts.infradead.org
Cc:     Frank.Li@....com, devicetree@...r.kernel.org, festevam@...il.com,
        imx@...ts.linux.dev, kernel@...gutronix.de,
        krzysztof.kozlowski+dt@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-imx@....com,
        linux-kernel@...r.kernel.org, robh+dt@...nel.org,
        s.hauer@...gutronix.de, Frank Li <Frank.Li@....com>
Subject: Re: [PATCH v2 2/3] arm64: dts: imx8qxp: add cadence usb3 support

Am Donnerstag, 16. März 2023, 22:27:10 CET schrieb Frank Li:
> There are cadence usb3.0 controller in 8qxp and 8qm.
> Add usb3 node at common connect subsystem.
> 
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
>  .../boot/dts/freescale/imx8-ss-conn.dtsi      | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index
> 4852760adeee..389f52f16a5c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
> @@ -138,6 +138,56 @@ fec2: ethernet@...50000 {
>  		status = "disabled";
>  	};
> 
> +	usbotg3: usb@...10000 {
> +		compatible = "fsl,imx8qm-usb3";

Mh, is imx8qm considered a subset of imx8qxp or vice versa?
Maybe it's worth adding a dedicated compatible for imx8qxp as well.

Best regards,
Alexander

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +		reg = <0x5b110000 0x10000>;
> +		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
> +			 <&usb3_lpcg IMX_LPCG_CLK_0>,
> +			 <&usb3_lpcg IMX_LPCG_CLK_7>,
> +			 <&usb3_lpcg IMX_LPCG_CLK_4>,
> +			 <&usb3_lpcg IMX_LPCG_CLK_5>;
> +		clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk",
> +			      "usb3_ipg_clk", "usb3_core_pclk";
> +		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
> +				  <&clk IMX_SC_R_USB_2 
IMX_SC_PM_CLK_MISC>,
> +				  <&clk IMX_SC_R_USB_2 
IMX_SC_PM_CLK_MST_BUS>;
> +		assigned-clock-rates = <125000000>, <12000000>, 
<250000000>;
> +		power-domains = <&pd IMX_SC_R_USB_2>;
> +		status = "disabled";
> +
> +		usbotg3_cdns3: usb@...20000 {
> +			compatible = "cdns,usb3";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 271 
IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 271 
IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 271 
IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "host", "peripheral", "otg", 
"wakeup";
> +			reg = <0x5b130000 0x10000>,     /* memory area 
for HOST registers */
> +			      <0x5b140000 0x10000>,   /* memory area for 
DEVICE registers */
> +			      <0x5b120000 0x10000>;   /* memory area for 
OTG/DRD registers */
> +			reg-names = "xhci", "dev", "otg";
> +			phys = <&usb3_phy>;
> +			phy-names = "cdns3,usb3-phy";
> +			status = "disabled";
> +		};
> +	};
> +
> +	usb3_phy: usb-phy@...60000 {
> +		compatible = "nxp,salvo-phy";
> +		reg = <0x5b160000 0x40000>;
> +		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
> +		clock-names = "salvo_phy_clk";
> +		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
> +		#phy-cells = <0>;
> +		status = "disabled";
> +	};
> +
>  	/* LPCG clocks */
>  	sdhc0_lpcg: clock-controller@...00000 {
>  		compatible = "fsl,imx8qxp-lpcg";
> @@ -234,4 +284,26 @@ usb2_lpcg: clock-controller@...70000 {
>  		clock-output-names = "usboh3_ahb_clk", 
"usboh3_phy_ipg_clk";
>  		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
>  	};
> +
> +	usb3_lpcg: clock-controller@...80000 {
> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x5b280000 0x10000>;
> +		#clock-cells = <1>;
> +		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
> +				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
> +				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
> +		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
> +			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
> +			 <&conn_ipg_clk>,
> +			 <&conn_ipg_clk>,
> +			 <&conn_ipg_clk>,
> +			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
> +		clock-output-names = "usb3_app_clk",
> +				     "usb3_lpm_clk",
> +				     "usb3_ipg_clk",
> +				     "usb3_core_pclk",
> +				     "usb3_phy_clk",
> +				     "usb3_aclk";
> +		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
> +	};
>  };


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/