| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230318082926.GA10144@pendragon.ideasonboard.com>
Date: Sat, 18 Mar 2023 10:29:26 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Rob Herring <robh@...nel.org>
Cc: Robin van der Gracht <robin@...tonic.nl>,
Miguel Ojeda <ojeda@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Jyri Sarha <jyri.sarha@....fi>,
Tomi Valkeinen <tomba@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
linux-mediatek@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, linux-renesas-soc@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] dt-bindings: display: Drop unneeded quotes
Hi Rob,
Thank you for the patch.
On Fri, Mar 17, 2023 at 06:36:24PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../display/bridge/toshiba,tc358767.yaml | 2 +-
> .../bindings/display/dp-aux-bus.yaml | 2 +-
> .../display/mediatek/mediatek,hdmi.yaml | 2 +-
> .../display/msm/dsi-controller-main.yaml | 8 ++++----
> .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
> .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +-
> .../bindings/display/renesas,du.yaml | 4 ++--
> .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +-
> .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++--
> .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +-
> .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++---
> .../bindings/display/ti/ti,am65x-dss.yaml | 2 +-
> .../display/xylon,logicvc-display.yaml | 18 +++++++++---------
> 17 files changed, 42 insertions(+), 42 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> index fc4873deb76f..4f6ffb8182a9 100644
> --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> @@ -10,7 +10,7 @@ maintainers:
> - Robin van der Gracht <robin@...tonic.nl>
>
> allOf:
> - - $ref: "/schemas/input/matrix-keymap.yaml#"
> + - $ref: /schemas/input/matrix-keymap.yaml#
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> index 107dd138e6c6..cdeb67bc05f0 100644
> --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> @@ -18,7 +18,7 @@ properties:
> maxItems: 1
>
> edid-emulation:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The EDID emulation entry to use
> Value Resolution Description
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> index 140927884418..e1494b5007cb 100644
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> @@ -23,7 +23,7 @@ properties:
> i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
>
> clock-names:
> - const: "ref"
> + const: ref
>
> clocks:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> index 5e4afe9f98fb..0ece7b01790b 100644
> --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> @@ -26,7 +26,7 @@ description:
>
> properties:
> $nodename:
> - const: "aux-bus"
> + const: aux-bus
>
> panel:
> $ref: panel/panel-common.yaml#
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> index 8afdd67d6780..b90b6d18a828 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> @@ -50,7 +50,7 @@ properties:
> - const: hdmi
>
> mediatek,syscon-hdmi:
> - $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: phandle to system configuration registers
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> index e75a3efe4dac..2188d7c9b0bb 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -74,7 +74,7 @@ properties:
>
> syscon-sfpb:
> description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> qcom,dual-dsi-mode:
> type: boolean
> @@ -105,14 +105,14 @@ properties:
> type: object
>
> ports:
> - $ref: "/schemas/graph.yaml#/properties/ports"
> + $ref: /schemas/graph.yaml#/properties/ports
> description: |
> Contains DSI controller input and output ports as children, each
> containing one endpoint subnode.
>
> properties:
> port@0:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Input endpoints of the controller.
> @@ -128,7 +128,7 @@ properties:
> enum: [ 0, 1, 2, 3 ]
>
> port@1:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Output endpoints of the controller.
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> index 3ec466c3ab38..e6b00d7387ce 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> @@ -58,7 +58,7 @@ properties:
> maximum: 31
>
> qcom,phy-drive-ldo-level:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The PHY LDO has an amplitude tuning feature to adjust the LDO output
> for the HSTX drive. Use supported levels (mV) to offset the drive level
> diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> index d67617f6f74a..95ce22c6787a 100644
> --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> @@ -37,7 +37,7 @@ properties:
>
> backlight:
> description: Backlight used by the panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
> index d4830f52c512..c5b9e6812bce 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.yaml
> +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
> @@ -76,7 +76,7 @@ properties:
> unevaluatedProperties: false
>
> renesas,cmms:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> maxItems: 1
> description:
> @@ -84,7 +84,7 @@ properties:
> available DU channel.
>
> renesas,vsps:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> items:
> - description: phandle to VSP instance that serves the DU channel
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> index d5ca8cf86e8e..f448624dd779 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> @@ -38,7 +38,7 @@ properties:
> description: The number of cells in a MIPI calibration specifier.
> Should be 1. The single cell specifies a bitmask of the pads that
> need to be calibrated for a given device.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 1
>
> additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> index 907fb0baccae..70f0e45c71d6 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> @@ -69,12 +69,12 @@ properties:
> # Tegra186 and later
> nvidia,interface:
> description: index of the SOR interface
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -82,23 +82,23 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel, required for eDP
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,xbar-cfg:
> description: 5 cells containing the crossbar configuration.
> Each lane of the SOR, identified by the cell's index, is
> mapped via the crossbar to the pad specified by the cell's
> value.
> - $ref: "/schemas/types.yaml#/definitions/uint32-array"
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> # optional when driving an eDP output
> nvidia,dpaux:
> description: phandle to a DispayPort AUX interface
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - if:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> index 265a60d79d89..ce4589466a18 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> @@ -60,13 +60,13 @@ properties:
> nvidia,outputs:
> description: A list of phandles of outputs that this display
> controller can drive.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,head:
> description: The number of the display controller head. This
> is used to setup the various types of output to receive
> video data from the given head.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> index e5a6145c8c53..da75b71e8ece 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> @@ -29,7 +29,7 @@ properties:
> - const: dsi
>
> allOf:
> - - $ref: "/schemas/reset/reset.yaml"
> + - $ref: /schemas/reset/reset.yaml
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> index 511cbe74e729..59e1dc0813e7 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> @@ -59,12 +59,12 @@ properties:
> description: Should contain a phandle and a specifier specifying
> which pads are used by this DSI output and need to be
> calibrated. See nvidia,tegra114-mipi.yaml for details.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -72,19 +72,19 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,ganged-mode:
> description: contains a phandle to a second DSI controller to
> gang up with in order to support up to 8 data lanes
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - - $ref: "../dsi-controller.yaml#"
> + - $ref: ../dsi-controller.yaml#
> - if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> index f65e59cfffa7..f77197e4869f 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> @@ -68,7 +68,7 @@ properties:
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -76,11 +76,11 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> "#sound-dai-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 5c7d2cbc4aac..4247280d6c3c 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -88,7 +88,7 @@ properties:
> The DSS DPI output port node from video port 2
>
> ti,am65x-oldi-io-ctrl:
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
> description:
> phandle to syscon device node mapping OLDI IO_CTRL registers.
> The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
> diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> index fc02c5d50ce4..87404d72ea37 100644
> --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> @@ -89,25 +89,25 @@ properties:
> description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
>
> xylon,display-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Display output depth (C_PIXEL_DATA_WIDTH).
>
> xylon,row-stride:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
>
> xylon,dithering:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: Dithering module is enabled (C_XCOLOR)
>
> xylon,background-layer:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> The last layer is used to display a black background (C_USE_BACKGROUND).
> The layer must still be registered.
>
> xylon,layers-configurable:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Configuration of layers' size, position and offset is enabled
> (C_USE_SIZE_POSITION).
> @@ -131,7 +131,7 @@ properties:
> maxItems: 1
>
> xylon,layer-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Layer depth (C_LAYER_X_DATA_WIDTH).
>
> xylon,layer-colorspace:
> @@ -151,19 +151,19 @@ properties:
> description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
>
> xylon,layer-base-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_LAYER_X_OFFSET) starting from the
> video RAM base (C_VMEM_BASEADDR), only for version 3.
>
> xylon,layer-buffer-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
> layer base offset for the second buffer used in double-buffering.
>
> xylon,layer-primary:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Layer should be registered as a primary plane (exactly one is
> required).
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists