lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230318223357.3899-1-kgroeneveld@lenbrook.com>
Date:   Sat, 18 Mar 2023 18:33:56 -0400
From:   Kevin Groeneveld <kgroeneveld@...brook.com>
To:     Andrzej Hajda <andrzej.hajda@...el.com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Robert Foss <rfoss@...nel.org>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        Jonas Karlman <jonas@...boo.se>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Cc:     Kevin Groeneveld <kgroeneveld@...brook.com>
Subject: [PATCH] drm/bridge: nwl-dsi: implement MIPI_DSI_MODE_NO_EOT_PACKET

Previously EOT packets were only being enabled when
MIPI_DSI_CLOCK_NON_CONTINUOUS was set in the dsi_mode_flags. However this
really should be based on MIPI_DSI_MODE_NO_EOT_PACKET instead.

Some displays require EOT packets and a continuous clock which was an
impossible combination to achieve with the current driver.

Signed-off-by: Kevin Groeneveld <kgroeneveld@...brook.com>
---
 drivers/gpu/drm/bridge/nwl-dsi.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 6dc2a4e191d7..bb8404ffd3f5 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -211,7 +211,7 @@ static u32 us2lp(u32 lp_clk_rate, unsigned long us)
 
 static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 {
-	u32 cycles;
+	u32 val, cycles;
 	struct phy_configure_opts_mipi_dphy *cfg = &dsi->phy_cfg.mipi_dphy;
 
 	if (dsi->lanes < 1 || dsi->lanes > 4)
@@ -220,13 +220,8 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "DSI Lanes %d\n", dsi->lanes);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_NUM_LANES, dsi->lanes - 1);
 
-	if (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
-		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x01);
-		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x01);
-	} else {
-		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x00);
-		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x00);
-	}
+	val = (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0x01 : 0x00;
+	nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, val);
 
 	/* values in byte clock cycles */
 	cycles = ui2bc(cfg->clk_pre);
@@ -241,6 +236,8 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_TX_GAP, cycles);
 
+	val = (dsi->dsi_mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET) ? 0x00 : 0x01;
+	nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, val);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP, 0x01);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_HTX_TO_COUNT, 0x00);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_LRX_H_TO_COUNT, 0x00);
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ