linux-kernel - [PATCH 0/3] clk: imx: Improve imx8mm/imx8mn LCDIF clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230319132120.6347-1-aford173@gmail.com>
Date:   Sun, 19 Mar 2023 08:21:17 -0500
From:   Adam Ford <aford173@...il.com>
To:     linux-clk@...r.kernel.org
Cc:     aford@...conembedded.com, Adam Ford <aford173@...il.com>,
        Abel Vesa <abelvesa@...nel.org>, Peng Fan <peng.fan@....com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 0/3] clk: imx: Improve imx8mm/imx8mn LCDIF clocks

Both the i.MX8M Mini and Nano have a video_pll which can be used 
to source a clock which feeds the lcdif interface.  This interface
currently fixes video_pll and divides down the clock feeding LCDIF.
However, when connected to an HDMI bridge chip that supports a
variety of video resolutions and refresh rates, the only settings
that properly sync are ones that evenly divide from the video_pll_out
clock.

This series adds the ability for the clk-compolsite-8m to
request a better parent clock if the proper clock flag is
enabled, then sets that flag in the corresponding imx8mm and 
imx8mn clocks.

This also has a side benefit of allowing the video-pll to run
at a lower clock speed which can potentially save some power
depending on the requested resolution and refresh rate.

Adam Ford (3):
  clk: imx: composite-8m: Add support to determine_rate
  clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate
  clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate

 drivers/clk/imx/clk-composite-8m.c | 7 +++++++
 drivers/clk/imx/clk-imx8mm.c       | 2 +-
 drivers/clk/imx/clk-imx8mn.c       | 2 +-
 drivers/clk/imx/clk.h              | 4 ++++
 4 files changed, 13 insertions(+), 2 deletions(-)

-- 
2.34.1