Decompressing Linux... Parsing ELF... No relocation needed... done. Booting the kernel (entry_offset: 0x00000000). Linux version 6.3.0-rc1-00013-g6e4da4eee625 (kbuild@1a7e79a9e914) (gcc-11 (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39.90.20221231) #1 SMP Sat Mar 18 03:18:42 CST 2023 KERNEL supported cpus: Intel GenuineIntel Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC Vortex Vortex86 SoC x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. signal: max sigframe size: 2016 BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000100-0x000000000009c7ff] usable BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000009916bfff] usable BIOS-e820: [mem 0x000000009916c000-0x000000009916cfff] ACPI NVS BIOS-e820: [mem 0x000000009916d000-0x00000000991b6fff] reserved BIOS-e820: [mem 0x00000000991b7000-0x000000009920afff] usable BIOS-e820: [mem 0x000000009920b000-0x0000000099a0bfff] reserved BIOS-e820: [mem 0x0000000099a0c000-0x000000009f19efff] usable BIOS-e820: [mem 0x000000009f19f000-0x000000009f3f6fff] reserved BIOS-e820: [mem 0x000000009f3f7000-0x000000009f444fff] ACPI data BIOS-e820: [mem 0x000000009f445000-0x000000009fabefff] ACPI NVS BIOS-e820: [mem 0x000000009fabf000-0x000000009fffefff] reserved BIOS-e820: [mem 0x000000009ffff000-0x000000009fffffff] usable BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x0000000759ffffff] usable e820: remove [mem 0x100000000-0xfffffffffffffffe] usable printk: debug: ignoring loglevel setting. printk: bootconsole [earlyser0] enabled NX (Execute Disable) protection: active user-defined physical RAM map: user: [mem 0x0000000000000100-0x000000000009c7ff] usable user: [mem 0x000000000009c800-0x000000000009ffff] reserved user: [mem 0x00000000000e0000-0x00000000000fffff] reserved user: [mem 0x0000000000100000-0x000000009916bfff] usable user: [mem 0x000000009916c000-0x000000009916cfff] ACPI NVS user: [mem 0x000000009916d000-0x00000000991b6fff] reserved user: [mem 0x00000000991b7000-0x000000009920afff] usable user: [mem 0x000000009920b000-0x0000000099a0bfff] reserved user: [mem 0x0000000099a0c000-0x000000009f19efff] usable user: [mem 0x000000009f19f000-0x000000009f3f6fff] reserved user: [mem 0x000000009f3f7000-0x000000009f444fff] ACPI data user: [mem 0x000000009f445000-0x000000009fabefff] ACPI NVS user: [mem 0x000000009fabf000-0x000000009fffefff] reserved user: [mem 0x000000009ffff000-0x000000009fffffff] usable user: [mem 0x00000000a0000000-0x00000000a00fffff] reserved user: [mem 0x00000000f8000000-0x00000000fbffffff] reserved user: [mem 0x00000000fe000000-0x00000000fe010fff] reserved user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved SMBIOS 2.8 present. DMI: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 tsc: Detected 3400.000 MHz processor tsc: Detected 3399.906 MHz TSC e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0xa0000 max_arch_pfn = 0x1000000 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mpc: fcba0-fcd54 initial memory mapped: [mem 0x00000000-0x029fffff] RAMDISK: [mem 0x69e1f000-0x7fff6fff] Allocated new RAMDISK: [mem 0x20e26000-0x36ffd732] Move RAMDISK from [mem 0x69e1f000-0x7fff6732] to [mem 0x20e26000-0x36ffd732] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL ) ACPI: XSDT 0x000000009F4170A0 0000BC (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FACP 0x000000009F439760 00010C (v05 DELL CBX3 01072009 AMI 00010013) ACPI: DSDT 0x000000009F4171E8 022574 (v02 DELL CBX3 01072009 INTL 20120913) ACPI: FACS 0x000000009FABEF80 000040 ACPI: APIC 0x000000009F439870 0000BC (v03 DELL CBX3 01072009 AMI 00010013) ACPI: FPDT 0x000000009F439930 000044 (v01 DELL CBX3 01072009 AMI 00010013) ACPI: FIDT 0x000000009F439978 00009C (v01 DELL CBX3 01072009 AMI 00010013) ACPI: MCFG 0x000000009F439A18 00003C (v01 DELL CBX3 01072009 MSFT 00000097) ACPI: HPET 0x000000009F439A58 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) ACPI: SSDT 0x000000009F439A90 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) ACPI: SSDT 0x000000009F439E00 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) ACPI: UEFI 0x000000009F43F1B8 000042 (v01 00000000 00000000) ACPI: LPIT 0x000000009F43F200 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) ACPI: SSDT 0x000000009F43F298 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) ACPI: SSDT 0x000000009F43F4E0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) ACPI: SSDT 0x000000009F442090 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) ACPI: DBGP 0x000000009F442C78 000034 (v01 INTEL 00000000 MSFT 0000005F) ACPI: DBG2 0x000000009F442CB0 000054 (v00 INTEL 00000000 MSFT 0000005F) ACPI: SSDT 0x000000009F442D08 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913) ACPI: SSDT 0x000000009F443320 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) ACPI: SLIC 0x000000009F444198 000176 (v03 DELL CBX3 01072009 MSFT 00010013) ACPI: ASF! 0x000000009F444310 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) ACPI: Reserving FACP table memory at [mem 0x9f439760-0x9f43986b] ACPI: Reserving DSDT table memory at [mem 0x9f4171e8-0x9f43975b] ACPI: Reserving FACS table memory at [mem 0x9fabef80-0x9fabefbf] ACPI: Reserving APIC table memory at [mem 0x9f439870-0x9f43992b] ACPI: Reserving FPDT table memory at [mem 0x9f439930-0x9f439973] ACPI: Reserving FIDT table memory at [mem 0x9f439978-0x9f439a13] ACPI: Reserving MCFG table memory at [mem 0x9f439a18-0x9f439a53] ACPI: Reserving HPET table memory at [mem 0x9f439a58-0x9f439a8f] ACPI: Reserving SSDT table memory at [mem 0x9f439a90-0x9f439dfc] ACPI: Reserving SSDT table memory at [mem 0x9f439e00-0x9f43f1b1] ACPI: Reserving UEFI table memory at [mem 0x9f43f1b8-0x9f43f1f9] ACPI: Reserving LPIT table memory at [mem 0x9f43f200-0x9f43f293] ACPI: Reserving SSDT table memory at [mem 0x9f43f298-0x9f43f4df] ACPI: Reserving SSDT table memory at [mem 0x9f43f4e0-0x9f44208d] ACPI: Reserving SSDT table memory at [mem 0x9f442090-0x9f442c72] ACPI: Reserving DBGP table memory at [mem 0x9f442c78-0x9f442cab] ACPI: Reserving DBG2 table memory at [mem 0x9f442cb0-0x9f442d03] ACPI: Reserving SSDT table memory at [mem 0x9f442d08-0x9f44331a] ACPI: Reserving SSDT table memory at [mem 0x9f443320-0x9f444192] ACPI: Reserving SLIC table memory at [mem 0x9f444198-0x9f44430d] ACPI: Reserving ASF! table memory at [mem 0x9f444310-0x9f4443b4] mapped APIC to ffffc000 ( fee00000) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000009fffffff] NODE_DATA(0) allocated [mem 0x20e24000-0x20e25fff] 1680MB HIGHMEM available. 879MB LOWMEM available. max_low_pfn = 36ffe, highstart_pfn = 36ffe Low memory ends at vaddr f6ffe000 High memory starts at vaddr f6ffe000 mapped low ram: 0 - 36ffe000 low ram: 0 - 36ffe000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] Normal [mem 0x0000000001000000-0x0000000036ffdfff] HighMem [mem 0x0000000036ffe000-0x000000009fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009bfff] node 0: [mem 0x0000000000100000-0x000000009916bfff] node 0: [mem 0x00000000991b7000-0x000000009920afff] node 0: [mem 0x0000000099a0c000-0x000000009f19efff] node 0: [mem 0x000000009ffff000-0x000000009fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000009fffffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 100 pages in unavailable ranges On node 0, zone HighMem: 75 pages in unavailable ranges On node 0, zone HighMem: 2049 pages in unavailable ranges On node 0, zone HighMem: 3680 pages in unavailable ranges Using APIC driver default Reserving Intel graphics memory at [mem 0xa2000000-0xa3ffffff] ACPI: PM-Timer IO Port: 0x1808 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f ACPI: Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) smpboot: Allowing 8 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffb000 (fec00000) PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x9916c000-0x9916cfff] PM: hibernation: Registered nosave memory: [mem 0x9916d000-0x991b6fff] PM: hibernation: Registered nosave memory: [mem 0x9920b000-0x99a0bfff] PM: hibernation: Registered nosave memory: [mem 0x9f19f000-0x9f3f6fff] PM: hibernation: Registered nosave memory: [mem 0x9f3f7000-0x9f444fff] PM: hibernation: Registered nosave memory: [mem 0x9f445000-0x9fabefff] PM: hibernation: Registered nosave memory: [mem 0x9fabf000-0x9fffefff] [mem 0xa4000000-0xf7ffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns setup_percpu: NR_CPUS:32 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 percpu: Embedded 33 pages/cpu s106196 r0 d28972 u135168 pcpu-alloc: s106196 r0 d28972 u135168 alloc=33*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Fallback order for Node 0: 0 Built 1 zonelists, mobility grouping on. Total pages: 647255 Policy zone: HighMem Kernel command line: ip=::::lkp-skl-d01::dhcp root=/dev/ram0 RESULT_ROOT=/result/xfstests/4HDD-btrfs-generic-group-34/lkp-skl-d01/debian-11.1-i386-20220923.cgz/i386-debian-10.3-func/gcc-11/6e4da4eee625fa8bac08d07ab4a9405ee3df085b/2 BOOT_IMAGE=/pkg/linux/i386-debian-10.3-func/gcc-11/6e4da4eee625fa8bac08d07ab4a9405ee3df085b/vmlinuz-6.3.0-rc1-00013-g6e4da4eee625 branch=viro-vfs/work.csum-x86 job=/lkp/jobs/scheduled/lkp-skl-d01/xfstests-4HDD-btrfs-generic-group-34-debian-11.1-i386-20220923.cgz-6e4da4eee625fa8bac08d07ab4a9405ee3df085b-20230318-18949-9kyqfc-5.yaml user=lkp ARCH=i386 kconfig=i386-debian-10.3-func commit=6e4da4eee625fa8bac08d07ab4a9405ee3df085b initcall_debug mem=4G nmi_watchdog=0 max_uptime=1200 LKP_SERVER=internal-lkp-server nokaslr selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel cons sysrq: sysrq always enabled. ignoring the deprecated load_ramdisk= option Unknown kernel command line parameters "nokaslr RESULT_ROOT=/result/xfstests/4HDD-btrfs-generic-group-34/lkp-skl-d01/debian-11.1-i386-20220923.cgz/i386-debian-10.3-func/gcc-11/6e4da4eee625fa8bac08d07ab4a9405ee3df085b/2 BOOT_IMAGE=/pkg/linux/i386-debian-10.3-func/gcc-11/6e4da4eee625fa8bac08d07ab4a9405ee3df085b/vmlinuz-6.3.0-rc1-00013-g6e4da4eee625 branch=viro-vfs/work.csum-x86 job=/lkp/jobs/scheduled/lkp-skl-d01/xfstests-4HDD-btrfs-generic-group-34-debian-11.1-i386-20220923.cgz-6e4da4eee625fa8bac08d07ab4a9405ee3df085b-20230318-18949-9kyqfc-5.yaml user=lkp ARCH=i386 kconfig=i386-debian-10.3-func commit=6e4da4eee625fa8bac08d07ab4a9405ee3df085b max_uptime=1200 LKP_SERVER=internal-lkp-server selinux=0 softlockup_panic=1 prompt_ramdisk=0 vga=normal", will be passed to user space. random: crng init done Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Initializing HighMem for node 0 (00036ffe:000a0000) Initializing Movable for node 0 (00000000:00000000) Checking if this processor honours the WP bit even in supervisor mode...Ok. Memory: 2185484K/2597820K available (10677K kernel code, 4603K rwdata, 3924K rodata, 1132K init, 1344K bss, 412336K reserved, 0K cma-reserved, 1697112K highmem) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 allocated 2621440 bytes of page_ext Kernel/User page tables isolation: enabled ************************************************************ ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! ** ** ** ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. ** ** Your performance will increase dramatically if you ** ** switch to a 64-bit kernel! ** ** ** ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! ** ************************************************************ ftrace: allocating 41644 entries in 82 pages ftrace: allocated 82 pages with 3 groups trace event string verifier disabled rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). Trampoline variant of Tasks RCU enabled. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 NR_IRQS: 2304, nr_irqs: 2048, preallocated irqs: 16 rcu: srcu_init: Setting srcu_struct sizes based on contention. spurious 8259A interrupt: IRQ7. calling con_init+0x0/0x258 @ 0 Console: colour VGA+ 80x25 printk: console [tty0] enabled initcall con_init+0x0/0x258 returned 0 after 0 usecs calling hvc_console_init+0x0/0x20 @ 0 initcall hvc_console_init+0x0/0x20 returned 0 after 0 usecs calling univ8250_console_init+0x0/0x2c @ 0 printk: console [ttyS0] enabled printk: console [ttyS0] enabled printk: bootconsole [earlyser0] disabled printk: bootconsole [earlyser0] disabled initcall univ8250_console_init+0x0/0x2c returned 0 after 0 usecs ACPI: Core revision 20221020 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns APIC: Switch to symmetric I/O mode setup Enabling APIC mode: Flat. Using 1 I/O APICs masked ExtINT on CPU#0 ESR value before enabling vector: 0x00000040 after: 0x00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs apic 2 pin 0 not connected IOAPIC[0]: Preconfigured routing entry (2-1 -> IRQ 1 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-2 -> IRQ 0 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-3 -> IRQ 3 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-4 -> IRQ 4 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-5 -> IRQ 5 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-6 -> IRQ 6 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-7 -> IRQ 7 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-8 -> IRQ 8 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-9 -> IRQ 9 Level:1 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-10 -> IRQ 10 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-11 -> IRQ 11 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-12 -> IRQ 12 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-13 -> IRQ 13 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-14 -> IRQ 14 Level:0 ActiveLow:0) IOAPIC[0]: Preconfigured routing entry (2-15 -> IRQ 15 Level:0 ActiveLow:0) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected apic 2 pin 24 not connected apic 2 pin 25 not connected apic 2 pin 26 not connected apic 2 pin 27 not connected apic 2 pin 28 not connected apic 2 pin 29 not connected apic 2 pin 30 not connected apic 2 pin 31 not connected apic 2 pin 32 not connected apic 2 pin 33 not connected apic 2 pin 34 not connected apic 2 pin 35 not connected apic 2 pin 36 not connected apic 2 pin 37 not connected apic 2 pin 38 not connected apic 2 pin 39 not connected apic 2 pin 40 not connected apic 2 pin 41 not connected apic 2 pin 42 not connected apic 2 pin 43 not connected apic 2 pin 44 not connected apic 2 pin 45 not connected apic 2 pin 46 not connected apic 2 pin 47 not connected apic 2 pin 48 not connected apic 2 pin 49 not connected apic 2 pin 50 not connected apic 2 pin 51 not connected apic 2 pin 52 not connected apic 2 pin 53 not connected apic 2 pin 54 not connected apic 2 pin 55 not connected apic 2 pin 56 not connected apic 2 pin 57 not connected apic 2 pin 58 not connected apic 2 pin 59 not connected apic 2 pin 60 not connected apic 2 pin 61 not connected apic 2 pin 62 not connected apic 2 pin 63 not connected apic 2 pin 64 not connected apic 2 pin 65 not connected apic 2 pin 66 not connected apic 2 pin 67 not connected apic 2 pin 68 not connected apic 2 pin 69 not connected apic 2 pin 70 not connected apic 2 pin 71 not connected apic 2 pin 72 not connected apic 2 pin 73 not connected apic 2 pin 74 not connected apic 2 pin 75 not connected apic 2 pin 76 not connected apic 2 pin 77 not connected apic 2 pin 78 not connected apic 2 pin 79 not connected apic 2 pin 80 not connected apic 2 pin 81 not connected apic 2 pin 82 not connected apic 2 pin 83 not connected apic 2 pin 84 not connected apic 2 pin 85 not connected apic 2 pin 86 not connected apic 2 pin 87 not connected apic 2 pin 88 not connected apic 2 pin 89 not connected apic 2 pin 90 not connected apic 2 pin 91 not connected apic 2 pin 92 not connected apic 2 pin 93 not connected apic 2 pin 94 not connected apic 2 pin 95 not connected apic 2 pin 96 not connected apic 2 pin 97 not connected apic 2 pin 98 not connected apic 2 pin 99 not connected apic 2 pin 100 not connected apic 2 pin 101 not connected apic 2 pin 102 not connected apic 2 pin 103 not connected apic 2 pin 104 not connected apic 2 pin 105 not connected apic 2 pin 106 not connected apic 2 pin 107 not connected apic 2 pin 108 not connected apic 2 pin 109 not connected apic 2 pin 110 not connected apic 2 pin 111 not connected apic 2 pin 112 not connected apic 2 pin 113 not connected apic 2 pin 114 not connected apic 2 pin 115 not connected apic 2 pin 116 not connected apic 2 pin 117 not connected apic 2 pin 118 not connected apic 2 pin 119 not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3101f59f5e6, max_idle_ns: 440795259996 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.81 BogoMIPS (lpj=13599624) pid_max: default: 32768 minimum: 301 LSM: initializing lsm=capability,yama,integrity,apparmor Yama: becoming mindful. AppArmor: AppArmor initialized Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Kernel not compiled with retpoline; no mitigation available! Spectre V2 : Vulnerable Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible! RETBleed: Vulnerable Speculative Store Bypass: Vulnerable MDS: Vulnerable: Clear CPU buffers attempted, no microcode TAA: Vulnerable: Clear CPU buffers attempted, no microcode MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode SRBDS: Vulnerable: No microcode Freeing SMP alternatives memory: 36K lapic timer already calibrated 95772 smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3) cblist_init_generic: Setting adjustable number of callback queues. cblist_init_generic: Setting shift to 3 and lim to 1. cblist_init_generic: Setting shift to 3 and lim to 1. cblist_init_generic: Setting shift to 3 and lim to 1. calling init_hw_perf_events+0x0/0x500 @ 1 Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f initcall init_hw_perf_events+0x0/0x500 returned 0 after 36000 usecs calling do_init_real_mode+0x0/0x14 @ 1 initcall do_init_real_mode+0x0/0x14 returned 0 after 0 usecs calling trace_init_perf_perm_irq_work_exit+0x0/0x24 @ 1 initcall trace_init_perf_perm_irq_work_exit+0x0/0x24 returned 0 after 0 usecs calling bp_init_aperfmperf+0x0/0x30 @ 1 initcall bp_init_aperfmperf+0x0/0x30 returned 0 after 0 usecs calling register_nmi_cpu_backtrace_handler+0x0/0x24 @ 1 initcall register_nmi_cpu_backtrace_handler+0x0/0x24 returned 0 after 0 usecs calling kvm_setup_vsyscall_timeinfo+0x0/0x28 @ 1 initcall kvm_setup_vsyscall_timeinfo+0x0/0x28 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x4c @ 1 initcall spawn_ksoftirqd+0x0/0x4c returned 0 after 0 usecs calling migration_init+0x0/0x48 @ 1 initcall migration_init+0x0/0x48 returned 0 after 0 usecs calling srcu_bootup_announce+0x0/0x70 @ 1 rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 1000. initcall srcu_bootup_announce+0x0/0x70 returned 0 after 8000 usecs calling rcu_spawn_gp_kthread+0x0/0x1dc @ 1 initcall rcu_spawn_gp_kthread+0x0/0x1dc returned 0 after 0 usecs calling check_cpu_stall_init+0x0/0x1c @ 1 initcall check_cpu_stall_init+0x0/0x1c returned 0 after 0 usecs calling rcu_sysrq_init+0x0/0x28 @ 1 initcall rcu_sysrq_init+0x0/0x28 returned 0 after 0 usecs calling trace_init_flags_sys_enter+0x0/0x14 @ 1 initcall trace_init_flags_sys_enter+0x0/0x14 returned 0 after 0 usecs calling trace_init_flags_sys_exit+0x0/0x14 @ 1 initcall trace_init_flags_sys_exit+0x0/0x14 returned 0 after 0 usecs calling cpu_stop_init+0x0/0x110 @ 1 initcall cpu_stop_init+0x0/0x110 returned 0 after 0 usecs calling init_kprobes+0x0/0x1bc @ 1 initcall init_kprobes+0x0/0x1bc returned 0 after 0 usecs calling init_trace_printk+0x0/0x1c @ 1 initcall init_trace_printk+0x0/0x1c returned 0 after 0 usecs calling event_trace_enable_again+0x0/0x48 @ 1 initcall event_trace_enable_again+0x0/0x48 returned 0 after 0 usecs calling irq_work_init_threads+0x0/0x4 @ 1 initcall irq_work_init_threads+0x0/0x4 returned 0 after 0 usecs calling jump_label_init_module+0x0/0x14 @ 1 initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x4c @ 1 initcall init_zero_pfn+0x0/0x4c returned 0 after 0 usecs calling init_fs_inode_sysctls+0x0/0x20 @ 1 initcall init_fs_inode_sysctls+0x0/0x20 returned 0 after 0 usecs calling init_fs_locks_sysctls+0x0/0x20 @ 1 initcall init_fs_locks_sysctls+0x0/0x20 returned 0 after 0 usecs calling dynamic_debug_init+0x0/0x248 @ 1 initcall dynamic_debug_init+0x0/0x248 returned 0 after 0 usecs calling efi_memreserve_root_init+0x0/0x68 @ 1 initcall efi_memreserve_root_init+0x0/0x68 returned 0 after 0 usecs calling efi_earlycon_remap_fb+0x0/0x64 @ 1 initcall efi_earlycon_remap_fb+0x0/0x64 returned 0 after 0 usecs calling idle_inject_init+0x0/0x14 @ 1 initcall idle_inject_init+0x0/0x14 returned 0 after 0 usecs smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 masked ExtINT on CPU#1 #2 masked ExtINT on CPU#2 #3 masked ExtINT on CPU#3 #4 masked ExtINT on CPU#4 MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. #5 masked ExtINT on CPU#5 #6 masked ExtINT on CPU#6 #7 masked ExtINT on CPU#7 smp: Brought up 1 node, 8 CPUs smpboot: Max logical packages: 1 smpboot: Total of 8 processors activated (54398.49 BogoMIPS) devtmpfs: initialized calling bpf_jit_charge_init+0x0/0x3c @ 1 initcall bpf_jit_charge_init+0x0/0x3c returned 0 after 0 usecs calling ipc_ns_init+0x0/0x48 @ 1 initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs calling init_mmap_min_addr+0x0/0x24 @ 1 initcall init_mmap_min_addr+0x0/0x24 returned 0 after 0 usecs calling pci_realloc_setup_params+0x0/0x40 @ 1 initcall pci_realloc_setup_params+0x0/0x40 returned 0 after 0 usecs calling inet_frag_wq_init+0x0/0x44 @ 1 initcall inet_frag_wq_init+0x0/0x44 returned 0 after 0 usecs calling e820__register_nvs_regions+0x0/0x64 @ 1 ACPI: PM: Registering ACPI NVS region [mem 0x9916c000-0x9916cfff] (4096 bytes) ACPI: PM: Registering ACPI NVS region [mem 0x9f445000-0x9fabefff] (6791168 bytes) initcall e820__register_nvs_regions+0x0/0x64 returned 0 after 12000 usecs calling cpufreq_register_tsc_scaling+0x0/0x30 @ 1 initcall cpufreq_register_tsc_scaling+0x0/0x30 returned 0 after 0 usecs calling cache_ap_register+0x0/0x28 @ 1 initcall cache_ap_register+0x0/0x28 returned 0 after 0 usecs calling reboot_init+0x0/0x50 @ 1 initcall reboot_init+0x0/0x50 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2c @ 1 initcall init_lapic_sysfs+0x0/0x2c returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xc @ 1 initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs calling cpu_hotplug_pm_sync_init+0x0/0x18 @ 1 initcall cpu_hotplug_pm_sync_init+0x0/0x18 returned 0 after 0 usecs calling wq_sysfs_init+0x0/0x34 @ 1 initcall wq_sysfs_init+0x0/0x34 returned 0 after 0 usecs calling ksysfs_init+0x0/0x8c @ 1 initcall ksysfs_init+0x0/0x8c returned 0 after 0 usecs calling schedutil_gov_init+0x0/0x14 @ 1 initcall schedutil_gov_init+0x0/0x14 returned 0 after 0 usecs calling pm_init+0x0/0x74 @ 1 initcall pm_init+0x0/0x74 returned 0 after 0 usecs calling pm_disk_init+0x0/0x1c @ 1 initcall pm_disk_init+0x0/0x1c returned 0 after 0 usecs calling swsusp_header_init+0x0/0x2c @ 1 initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs calling rcu_set_runtime_mode+0x0/0x1c @ 1 initcall rcu_set_runtime_mode+0x0/0x1c returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x1c @ 1 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns initcall init_jiffies_clocksource+0x0/0x1c returned 0 after 4000 usecs calling futex_init+0x0/0x104 @ 1 futex hash table entries: 2048 (order: 5, 131072 bytes, linear) initcall futex_init+0x0/0x104 returned 0 after 4000 usecs calling cgroup_wq_init+0x0/0x38 @ 1 initcall cgroup_wq_init+0x0/0x38 returned 0 after 0 usecs calling cgroup1_wq_init+0x0/0x3c @ 1 initcall cgroup1_wq_init+0x0/0x3c returned 0 after 0 usecs calling ftrace_mod_cmd_init+0x0/0x10 @ 1 initcall ftrace_mod_cmd_init+0x0/0x10 returned 0 after 0 usecs calling init_graph_trace+0x0/0x74 @ 1 initcall init_graph_trace+0x0/0x74 returned 0 after 0 usecs calling trace_events_eprobe_init_early+0x0/0x40 @ 1 initcall trace_events_eprobe_init_early+0x0/0x40 returned 0 after 0 usecs calling trace_events_synth_init_early+0x0/0x34 @ 1 initcall trace_events_synth_init_early+0x0/0x34 returned 0 after 0 usecs calling init_kprobe_trace_early+0x0/0x30 @ 1 initcall init_kprobe_trace_early+0x0/0x30 returned 0 after 0 usecs calling cma_init_reserved_areas+0x0/0x50 @ 1 initcall cma_init_reserved_areas+0x0/0x50 returned 0 after 0 usecs calling fsnotify_init+0x0/0x50 @ 1 initcall fsnotify_init+0x0/0x50 returned 0 after 0 usecs calling filelock_init+0x0/0xdc @ 1 initcall filelock_init+0x0/0xdc returned 0 after 0 usecs calling init_script_binfmt+0x0/0x18 @ 1 initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x18 @ 1 initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs calling debugfs_init+0x0/0x84 @ 1 initcall debugfs_init+0x0/0x84 returned 0 after 0 usecs calling tracefs_init+0x0/0x40 @ 1 initcall tracefs_init+0x0/0x40 returned 0 after 0 usecs calling securityfs_init+0x0/0x80 @ 1 initcall securityfs_init+0x0/0x80 returned 0 after 0 usecs calling pinctrl_init+0x0/0xb0 @ 1 pinctrl core: initialized pinctrl subsystem initcall pinctrl_init+0x0/0xb0 returned 0 after 4000 usecs calling gpiolib_dev_init+0x0/0x10c @ 1 initcall gpiolib_dev_init+0x0/0x10c returned 0 after 0 usecs calling regulator_init+0x0/0xe8 @ 1 initcall regulator_init+0x0/0xe8 returned 0 after 0 usecs calling iommu_init+0x0/0x38 @ 1 initcall iommu_init+0x0/0x38 returned 0 after 0 usecs calling component_debug_init+0x0/0x2c @ 1 initcall component_debug_init+0x0/0x2c returned 0 after 0 usecs calling opp_debug_init+0x0/0x24 @ 1 initcall opp_debug_init+0x0/0x24 returned 0 after 0 usecs calling cpufreq_core_init+0x0/0x9c @ 1 initcall cpufreq_core_init+0x0/0x9c returned 0 after 0 usecs calling cpufreq_gov_performance_init+0x0/0x14 @ 1 initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 0 usecs calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x20 @ 1 initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x20 returned 0 after 0 usecs calling cpuidle_init+0x0/0x28 @ 1 initcall cpuidle_init+0x0/0x28 returned 0 after 0 usecs calling capsule_reboot_register+0x0/0x14 @ 1 initcall capsule_reboot_register+0x0/0x14 returned 0 after 0 usecs calling sock_init+0x0/0x9c @ 1 initcall sock_init+0x0/0x9c returned 0 after 0 usecs calling net_inuse_init+0x0/0x24 @ 1 initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs calling net_defaults_init+0x0/0x44 @ 1 initcall net_defaults_init+0x0/0x44 returned 0 after 0 usecs calling init_default_flow_dissectors+0x0/0x50 @ 1 initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs calling netpoll_init+0x0/0x34 @ 1 initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x1b0 @ 1 NET: Registered PF_NETLINK/PF_ROUTE protocol family initcall netlink_proto_init+0x0/0x1b0 returned 0 after 8000 usecs calling genl_init+0x0/0x34 @ 1 initcall genl_init+0x0/0x34 returned 0 after 0 usecs calling bsp_pm_check_init+0x0/0x18 @ 1 initcall bsp_pm_check_init+0x0/0x18 returned 0 after 0 usecs calling irq_sysfs_init+0x0/0xd0 @ 1 initcall irq_sysfs_init+0x0/0xd0 returned 0 after 0 usecs calling audit_init+0x0/0x194 @ 1 audit: initializing netlink subsys (disabled) initcall audit_init+0x0/0x194 returned 0 after 4000 usecs audit: type=2000 audit(1679093784.016:1): state=initialized audit_enabled=0 res=1 calling release_early_probes+0x0/0x44 @ 1 initcall release_early_probes+0x0/0x44 returned 0 after 0 usecs calling bdi_class_init+0x0/0x44 @ 1 initcall bdi_class_init+0x0/0x44 returned 0 after 0 usecs calling mm_sysfs_init+0x0/0x28 @ 1 initcall mm_sysfs_init+0x0/0x28 returned 0 after 0 usecs calling init_per_zone_wmark_min+0x0/0x2c @ 1 initcall init_per_zone_wmark_min+0x0/0x2c returned 0 after 0 usecs calling mpi_init+0x0/0x90 @ 1 initcall mpi_init+0x0/0x90 returned 0 after 0 usecs calling gpiolib_sysfs_init+0x0/0x90 @ 1 initcall gpiolib_sysfs_init+0x0/0x90 returned 0 after 0 usecs calling acpi_gpio_setup_params+0x0/0xd4 @ 1 initcall acpi_gpio_setup_params+0x0/0xd4 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x1c @ 1 initcall pcibus_class_init+0x0/0x1c returned 0 after 0 usecs calling pci_driver_init+0x0/0x30 @ 1 initcall pci_driver_init+0x0/0x30 returned 0 after 0 usecs calling backlight_class_init+0x0/0xa0 @ 1 initcall backlight_class_init+0x0/0xa0 returned 0 after 0 usecs calling tty_class_init+0x0/0x30 @ 1 initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xec @ 1 initcall vtconsole_class_init+0x0/0xec returned 0 after 0 usecs calling serdev_init+0x0/0x2c @ 1 initcall serdev_init+0x0/0x2c returned 0 after 0 usecs calling iommu_dev_init+0x0/0x1c @ 1 initcall iommu_dev_init+0x0/0x1c returned 0 after 0 usecs calling mipi_dsi_bus_init+0x0/0x1c @ 1 initcall mipi_dsi_bus_init+0x0/0x1c returned 0 after 0 usecs calling devlink_class_init+0x0/0x4c @ 1 initcall devlink_class_init+0x0/0x4c returned 0 after 0 usecs calling software_node_init+0x0/0x2c @ 1 initcall software_node_init+0x0/0x2c returned 0 after 0 usecs calling wakeup_sources_debugfs_init+0x0/0x24 @ 1 initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs calling wakeup_sources_sysfs_init+0x0/0x34 @ 1 initcall wakeup_sources_sysfs_init+0x0/0x34 returned 0 after 0 usecs calling isa_bus_init+0x0/0x50 @ 1 initcall isa_bus_init+0x0/0x50 returned 0 after 0 usecs calling regmap_initcall+0x0/0x14 @ 1 initcall regmap_initcall+0x0/0x14 returned 0 after 0 usecs calling spi_init+0x0/0xa0 @ 1 initcall spi_init+0x0/0xa0 returned 0 after 0 usecs calling i2c_init+0x0/0xd0 @ 1 initcall i2c_init+0x0/0xd0 returned 0 after 0 usecs calling thermal_init+0x0/0x160 @ 1 thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'bang_bang' thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'user_space' initcall thermal_init+0x0/0x160 returned 0 after 12000 usecs calling init_ladder+0x0/0x28 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x28 returned 0 after 4000 usecs calling init_menu+0x0/0x20 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x20 returned 0 after 4000 usecs calling init_haltpoll+0x0/0x30 @ 1 initcall init_haltpoll+0x0/0x30 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x10 @ 1 initcall kobject_uevent_init+0x0/0x10 returned 0 after 0 usecs calling bts_init+0x0/0xc0 @ 1 initcall bts_init+0x0/0xc0 returned -19 after 0 usecs calling pt_init+0x0/0x20c @ 1 initcall pt_init+0x0/0x20c returned 0 after 0 usecs calling boot_params_ksysfs_init+0x0/0x6c @ 1 initcall boot_params_ksysfs_init+0x0/0x6c returned 0 after 0 usecs calling sbf_init+0x0/0xe0 @ 1 initcall sbf_init+0x0/0xe0 returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x28 @ 1 initcall arch_kdebugfs_init+0x0/0x28 returned 0 after 0 usecs calling init_pit_clocksource+0x0/0x48 @ 1 initcall init_pit_clocksource+0x0/0x48 returned 0 after 0 usecs calling intel_pconfig_init+0x0/0xe0 @ 1 initcall intel_pconfig_init+0x0/0xe0 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x5c @ 1 initcall mtrr_if_init+0x0/0x5c returned 0 after 0 usecs calling activate_jump_labels+0x0/0x48 @ 1 initcall activate_jump_labels+0x0/0x48 returned 0 after 0 usecs calling init_s4_sigcheck+0x0/0x30 @ 1 initcall init_s4_sigcheck+0x0/0x30 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x40 @ 1 initcall ffh_cstate_init+0x0/0x40 returned 0 after 0 usecs calling kvm_alloc_cpumask+0x0/0x108 @ 1 initcall kvm_alloc_cpumask+0x0/0x108 returned 0 after 0 usecs calling activate_jump_labels+0x0/0x48 @ 1 initcall activate_jump_labels+0x0/0x48 returned 0 after 0 usecs calling kcmp_cookies_init+0x0/0x70 @ 1 initcall kcmp_cookies_init+0x0/0x70 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x14 @ 1 initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs calling acpi_pci_init+0x0/0x70 @ 1 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpi_pci_init+0x0/0x70 returned 0 after 8000 usecs calling dma_channel_table_init+0x0/0x128 @ 1 initcall dma_channel_table_init+0x0/0x128 returned 0 after 0 usecs calling dma_bus_init+0x0/0xd8 @ 1 initcall dma_bus_init+0x0/0xd8 returned 0 after 0 usecs calling iommu_dma_init+0x0/0x2c @ 1 initcall iommu_dma_init+0x0/0x2c returned 0 after 0 usecs calling dmi_id_init+0x0/0xb4 @ 1 initcall dmi_id_init+0x0/0xb4 returned 0 after 0 usecs calling pci_arch_init+0x0/0x90 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x90 returned 0 after 16000 usecs calling init_vdso_image_32+0x0/0x1c @ 1 initcall init_vdso_image_32+0x0/0x1c returned 0 after 0 usecs calling fixup_ht_bug+0x0/0x144 @ 1 initcall fixup_ht_bug+0x0/0x144 returned 0 after 0 usecs calling topology_init+0x0/0x5c @ 1 initcall topology_init+0x0/0x5c returned 0 after 0 usecs calling intel_epb_init+0x0/0xa0 @ 1 initcall intel_epb_init+0x0/0xa0 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x54 @ 1 initcall mtrr_init_finialize+0x0/0x54 returned 0 after 0 usecs calling uid_cache_init+0x0/0xb8 @ 1 initcall uid_cache_init+0x0/0xb8 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x44 @ 1 initcall param_sysfs_init+0x0/0x44 returned 0 after 0 usecs calling user_namespace_sysctl_init+0x0/0xd0 @ 1 initcall user_namespace_sysctl_init+0x0/0xd0 returned 0 after 0 usecs calling proc_schedstat_init+0x0/0x24 @ 1 initcall proc_schedstat_init+0x0/0x24 returned 0 after 0 usecs calling pm_sysrq_init+0x0/0x20 @ 1 initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs calling create_proc_profile+0x0/0xd8 @ 1 initcall create_proc_profile+0x0/0xd8 returned 0 after 0 usecs calling crash_save_vmcoreinfo_init+0x0/0x5c0 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x5c0 returned 0 after 0 usecs calling crash_notes_memory_init+0x0/0x3c @ 1 initcall crash_notes_memory_init+0x0/0x3c returned 0 after 0 usecs calling cgroup_sysfs_init+0x0/0x1c @ 1 initcall cgroup_sysfs_init+0x0/0x1c returned 0 after 0 usecs calling cgroup_namespaces_init+0x0/0x10 @ 1 initcall cgroup_namespaces_init+0x0/0x10 returned 0 after 0 usecs calling user_namespaces_init+0x0/0x2c @ 1 initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs calling init_optprobes+0x0/0x20 @ 1 kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. initcall init_optprobes+0x0/0x20 returned 0 after 8000 usecs calling hung_task_init+0x0/0x6c @ 1 initcall hung_task_init+0x0/0x6c returned 0 after 0 usecs calling ftrace_check_for_weak_functions+0x0/0x54 @ 1 initcall ftrace_check_for_weak_functions+0x0/0x54 returned 0 after 0 usecs calling trace_eval_init+0x0/0x90 @ 1 initcall trace_eval_init+0x0/0x90 returned 0 after 0 usecs calling send_signal_irq_work_init+0x0/0xa8 @ 1 initcall send_signal_irq_work_init+0x0/0xa8 returned 0 after 0 usecs calling dev_map_init+0x0/0xa0 @ 1 initcall dev_map_init+0x0/0xa0 returned 0 after 0 usecs calling cpu_map_init+0x0/0x90 @ 1 initcall cpu_map_init+0x0/0x90 returned 0 after 0 usecs calling netns_bpf_init+0x0/0x14 @ 1 initcall netns_bpf_init+0x0/0x14 returned 0 after 0 usecs calling oom_init+0x0/0x48 @ 1 initcall oom_init+0x0/0x48 returned 0 after 0 usecs calling default_bdi_init+0x0/0x28 @ 1 initcall default_bdi_init+0x0/0x28 returned 0 after 0 usecs calling cgwb_init+0x0/0x2c @ 1 initcall cgwb_init+0x0/0x2c returned 0 after 0 usecs calling percpu_enable_async+0x0/0x14 @ 1 initcall percpu_enable_async+0x0/0x14 returned 0 after 0 usecs calling kcompactd_init+0x0/0xb0 @ 1 initcall kcompactd_init+0x0/0xb0 returned 0 after 0 usecs calling init_user_reserve+0x0/0x30 @ 1 initcall init_user_reserve+0x0/0x30 returned 0 after 0 usecs calling init_admin_reserve+0x0/0x30 @ 1 initcall init_admin_reserve+0x0/0x30 returned 0 after 0 usecs calling init_reserve_notifier+0x0/0x10 @ 1 initcall init_reserve_notifier+0x0/0x10 returned 0 after 0 usecs calling swap_init_sysfs+0x0/0x70 @ 1 initcall swap_init_sysfs+0x0/0x70 returned 0 after 0 usecs calling swapfile_init+0x0/0xe8 @ 1 initcall swapfile_init+0x0/0xe8 returned 0 after 0 usecs calling hugetlb_init+0x0/0x8bc @ 1 HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page initcall hugetlb_init+0x0/0x8bc returned 0 after 8000 usecs calling ksm_init+0x0/0x1d8 @ 1 initcall ksm_init+0x0/0x1d8 returned 0 after 0 usecs calling memory_tier_init+0x0/0x2c0 @ 1 initcall memory_tier_init+0x0/0x2c0 returned 0 after 0 usecs calling numa_init_sysfs+0x0/0x70 @ 1 initcall numa_init_sysfs+0x0/0x70 returned 0 after 0 usecs calling hugepage_init+0x0/0x184 @ 1 initcall hugepage_init+0x0/0x184 returned 0 after 0 usecs calling mem_cgroup_init+0x0/0x1d0 @ 1 initcall mem_cgroup_init+0x0/0x1d0 returned 0 after 0 usecs calling mem_cgroup_swap_init+0x0/0x74 @ 1 initcall mem_cgroup_swap_init+0x0/0x74 returned 0 after 0 usecs calling page_idle_init+0x0/0x40 @ 1 initcall page_idle_init+0x0/0x40 returned 0 after 0 usecs calling dh_init+0x0/0x40 @ 1 initcall dh_init+0x0/0x40 returned 0 after 0 usecs calling rsa_init+0x0/0x3c @ 1 initcall rsa_init+0x0/0x3c returned 0 after 0 usecs calling hmac_module_init+0x0/0x20 @ 1 initcall hmac_module_init+0x0/0x20 returned 0 after 0 usecs calling crypto_null_mod_init+0x0/0x70 @ 1 initcall crypto_null_mod_init+0x0/0x70 returned 0 after 0 usecs calling md5_mod_init+0x0/0x14 @ 1 initcall md5_mod_init+0x0/0x14 returned 0 after 0 usecs calling sha1_generic_mod_init+0x0/0x14 @ 1 initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 0 usecs calling sha256_generic_mod_init+0x0/0x1c @ 1 initcall sha256_generic_mod_init+0x0/0x1c returned 0 after 0 usecs calling aes_init+0x0/0x1c @ 1 initcall aes_init+0x0/0x1c returned 0 after 0 usecs calling deflate_mod_init+0x0/0x44 @ 1 initcall deflate_mod_init+0x0/0x44 returned 0 after 0 usecs calling crct10dif_mod_init+0x0/0x1c @ 1 initcall crct10dif_mod_init+0x0/0x1c returned 0 after 0 usecs calling lzo_mod_init+0x0/0x40 @ 1 initcall lzo_mod_init+0x0/0x40 returned 0 after 0 usecs calling lzorle_mod_init+0x0/0x3c @ 1 initcall lzorle_mod_init+0x0/0x3c returned 0 after 0 usecs calling init_bio+0x0/0xa0 @ 1 initcall init_bio+0x0/0xa0 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2c @ 1 initcall blk_ioc_init+0x0/0x2c returned 0 after 0 usecs calling blk_mq_init+0x0/0xf0 @ 1 initcall blk_mq_init+0x0/0xf0 returned 0 after 0 usecs calling genhd_device_init+0x0/0x58 @ 1 initcall genhd_device_init+0x0/0x58 returned 0 after 0 usecs calling blkcg_init+0x0/0x28 @ 1 initcall blkcg_init+0x0/0x28 returned 0 after 0 usecs calling io_wq_init+0x0/0x38 @ 1 initcall io_wq_init+0x0/0x38 returned 0 after 0 usecs calling sg_pool_init+0x0/0xc0 @ 1 initcall sg_pool_init+0x0/0xc0 returned 0 after 0 usecs calling irq_poll_setup+0x0/0xb0 @ 1 initcall irq_poll_setup+0x0/0xb0 returned 0 after 0 usecs calling gpiolib_debugfs_init+0x0/0x24 @ 1 initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs calling pwm_debugfs_init+0x0/0x24 @ 1 initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs calling pwm_sysfs_init+0x0/0x28 @ 1 initcall pwm_sysfs_init+0x0/0x28 returned 0 after 0 usecs calling pci_slot_init+0x0/0x40 @ 1 initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs calling fbmem_init+0x0/0xf0 @ 1 initcall fbmem_init+0x0/0xf0 returned 0 after 0 usecs calling scan_for_dmi_ipmi+0x0/0x310 @ 1 initcall scan_for_dmi_ipmi+0x0/0x310 returned 0 after 0 usecs calling acpi_init+0x0/0x134 @ 1 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: 8 ACPI AML tables successfully acquired and loaded ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C281F800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C3189800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C281D000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C316B800 000119 (v02 PmRef ApCst 00003000 INTL 20120913) ACPI: Interpreter enabled ACPI: PM: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug PCI: Using E820 reservations for host bridge windows ACPI: Enabled 7 GPEs in block 00 to 7F ACPI: \_SB_.PCI0.PEG0.PG00: New power resource ACPI: \_SB_.PCI0.PEG1.PG01: New power resource ACPI: \_SB_.PCI0.PEG2.PG02: New power resource ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource ACPI: \_TZ_.FN00: New power resource ACPI: \_TZ_.FN01: New power resource ACPI: \_TZ_.FN02: New power resource ACPI: \_TZ_.FN03: New power resource ACPI: \_TZ_.FN04: New power resource ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xa4000000-0xf7ffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1 pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 pci 0000:00:01.0: calling quirk_cmd_compl+0x0/0x60 @ 1 pci 0000:00:01.0: quirk_cmd_compl+0x0/0x60 took 0 usecs pci 0000:00:01.0: calling quirk_no_aersid+0x0/0xc @ 1 pci 0000:00:01.0: quirk_no_aersid+0x0/0xc took 0 usecs pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x28 @ 1 pci 0000:00:01.0: pci_fixup_transparent_bridge+0x0/0x28 took 0 usecs pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: calling efifb_fixup_resources+0x0/0x188 @ 1 pci 0000:00:02.0: efifb_fixup_resources+0x0/0x188 took 0 usecs pci 0000:00:02.0: calling pci_fixup_video+0x0/0x10c @ 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: pci_fixup_video+0x0/0x10c took 7812 usecs pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 pci 0000:00:14.0: reg 0x10: [mem 0xf7030000-0xf703ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 pci 0000:00:14.2: reg 0x10: [mem 0xf704e000-0xf704efff 64bit] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0xf704d000-0xf704dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 pci 0000:00:17.0: reg 0x10: [mem 0xf7048000-0xf7049fff] pci 0000:00:17.0: reg 0x14: [mem 0xf704c000-0xf704c0ff] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:17.0: reg 0x24: [mem 0xf704b000-0xf704b7ff] pci 0000:00:17.0: PME# supported from D3hot pci 0000:00:1c.0: calling quirk_cmd_compl+0x0/0x60 @ 1 pci 0000:00:1c.0: quirk_cmd_compl+0x0/0x60 took 0 usecs pci 0000:00:1c.0: calling quirk_no_aersid+0x0/0xc @ 1 pci 0000:00:1c.0: quirk_no_aersid+0x0/0xc took 0 usecs pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x28 @ 1 pci 0000:00:1c.0: pci_fixup_transparent_bridge+0x0/0x28 took 0 usecs pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100 pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 pci 0000:00:1f.2: reg 0x10: [mem 0xf7044000-0xf7047fff] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 pci 0000:00:1f.3: reg 0x10: [mem 0xf7040000-0xf7043fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xf7020000-0xf702ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 pci 0000:00:1f.4: reg 0x10: [mem 0xf704a000-0xf704a0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1f.6: calling quirk_f0_vpd_link+0x0/0x64 @ 1 pci 0000:00:1f.6: quirk_f0_vpd_link+0x0/0x64 took 0 usecs pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 pci 0000:00:1f.6: reg 0x10: [mem 0xf7000000-0xf701ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400 pci 0000:02:00.0: supports D1 D2 pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:03: extended config space not accessible pci 0000:02:00.0: PCI bridge to [bus 03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI: Interrupt link LNKA configured for IRQ 7 ACPI: PCI: Interrupt link LNKA disabled ACPI: PCI: Interrupt link LNKB configured for IRQ 10 ACPI: PCI: Interrupt link LNKB disabled ACPI: PCI: Interrupt link LNKC configured for IRQ 5 ACPI: PCI: Interrupt link LNKC disabled ACPI: PCI: Interrupt link LNKD configured for IRQ 11 ACPI: PCI: Interrupt link LNKD disabled ACPI: PCI: Interrupt link LNKE configured for IRQ 7 ACPI: PCI: Interrupt link LNKE disabled ACPI: PCI: Interrupt link LNKF configured for IRQ 3 ACPI: PCI: Interrupt link LNKF disabled ACPI: PCI: Interrupt link LNKG configured for IRQ 4 ACPI: PCI: Interrupt link LNKG disabled ACPI: PCI: Interrupt link LNKH configured for IRQ 11 ACPI: PCI: Interrupt link LNKH disabled initcall acpi_init+0x0/0x134 returned 0 after 832000 usecs calling pnp_init+0x0/0x1c @ 1 initcall pnp_init+0x0/0x1c returned 0 after 0 usecs calling misc_init+0x0/0xd0 @ 1 initcall misc_init+0x0/0xd0 returned 0 after 0 usecs calling iommu_subsys_init+0x0/0x168 @ 1 iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode initcall iommu_subsys_init+0x0/0x168 returned 0 after 12000 usecs calling cn_init+0x0/0xbc @ 1 initcall cn_init+0x0/0xbc returned 0 after 0 usecs calling dax_core_init+0x0/0xcc @ 1 initcall dax_core_init+0x0/0xcc returned 0 after 0 usecs calling dma_buf_init+0x0/0xc0 @ 1 initcall dma_buf_init+0x0/0xc0 returned 0 after 0 usecs calling init_scsi+0x0/0x90 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x90 returned 0 after 4000 usecs calling phy_init+0x0/0x70 @ 1 initcall phy_init+0x0/0x70 returned 0 after 0 usecs calling xdbc_init+0x0/0x1d8 @ 1 initcall xdbc_init+0x0/0x1d8 returned 0 after 0 usecs calling serio_init+0x0/0x40 @ 1 initcall serio_init+0x0/0x40 returned 0 after 0 usecs calling input_init+0x0/0x128 @ 1 initcall input_init+0x0/0x128 returned 0 after 0 usecs calling rtc_init+0x0/0x50 @ 1 initcall rtc_init+0x0/0x50 returned 0 after 0 usecs calling pps_init+0x0/0xb0 @ 1 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti initcall pps_init+0x0/0xb0 returned 0 after 16000 usecs calling ptp_init+0x0/0xa0 @ 1 PTP clock support registered initcall ptp_init+0x0/0xa0 returned 0 after 4000 usecs calling power_supply_class_init+0x0/0x40 @ 1 initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs calling hwmon_init+0x0/0xf0 @ 1 initcall hwmon_init+0x0/0xf0 returned 0 after 0 usecs calling edac_init+0x0/0x7c @ 1 EDAC MC: Ver: 3.0.0 initcall edac_init+0x0/0x7c returned 0 after 4000 usecs calling leds_init+0x0/0x38 @ 1 initcall leds_init+0x0/0x38 returned 0 after 0 usecs calling dmi_init+0x0/0x120 @ 1 initcall dmi_init+0x0/0x120 returned 0 after 0 usecs calling efisubsys_init+0x0/0x2f8 @ 1 initcall efisubsys_init+0x0/0x2f8 returned 0 after 0 usecs calling hv_acpi_init+0x0/0xc0 @ 1 initcall hv_acpi_init+0x0/0xc0 returned -19 after 0 usecs calling devfreq_init+0x0/0xc0 @ 1 initcall devfreq_init+0x0/0xc0 returned 0 after 0 usecs calling ras_init+0x0/0x14 @ 1 initcall ras_init+0x0/0x14 returned 0 after 0 usecs calling nvmem_init+0x0/0x14 @ 1 initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs calling proto_init+0x0/0x14 @ 1 initcall proto_init+0x0/0x14 returned 0 after 0 usecs calling net_dev_init+0x0/0x334 @ 1 initcall net_dev_init+0x0/0x334 returned 0 after 0 usecs calling neigh_init+0x0/0x7c @ 1 initcall neigh_init+0x0/0x7c returned 0 after 0 usecs calling fib_notifier_init+0x0/0x14 @ 1 initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs calling netdev_genl_init+0x0/0x3c @ 1 initcall netdev_genl_init+0x0/0x3c returned 0 after 0 usecs calling fib_rules_init+0x0/0xc0 @ 1 initcall fib_rules_init+0x0/0xc0 returned 0 after 0 usecs calling init_cgroup_netprio+0x0/0x18 @ 1 initcall init_cgroup_netprio+0x0/0x18 returned 0 after 0 usecs calling bpf_lwt_init+0x0/0x1c @ 1 initcall bpf_lwt_init+0x0/0x1c returned 0 after 0 usecs calling pktsched_init+0x0/0x104 @ 1 initcall pktsched_init+0x0/0x104 returned 0 after 0 usecs calling tc_filter_init+0x0/0xe8 @ 1 initcall tc_filter_init+0x0/0xe8 returned 0 after 0 usecs calling tc_action_init+0x0/0x58 @ 1 initcall tc_action_init+0x0/0x58 returned 0 after 0 usecs calling ethnl_init+0x0/0x60 @ 1 initcall ethnl_init+0x0/0x60 returned 0 after 0 usecs calling nexthop_init+0x0/0xe0 @ 1 initcall nexthop_init+0x0/0xe0 returned 0 after 0 usecs calling devlink_init+0x0/0x30 @ 1 initcall devlink_init+0x0/0x30 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x44 @ 1 initcall wireless_nlevent_init+0x0/0x44 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x80 @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] e820: reserve RAM buffer [mem 0x9916c000-0x9bffffff] e820: reserve RAM buffer [mem 0x9920b000-0x9bffffff] e820: reserve RAM buffer [mem 0x9f19f000-0x9fffffff] initcall pci_subsys_init+0x0/0x80 returned 0 after 44000 usecs calling vsprintf_init_hashval+0x0/0x18 @ 1 initcall vsprintf_init_hashval+0x0/0x18 returned 0 after 0 usecs calling efi_runtime_map_init+0x0/0xf8 @ 1 initcall efi_runtime_map_init+0x0/0xf8 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x90 @ 1 pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: bridge control possible pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x90 returned 0 after 24000 usecs calling watchdog_init+0x0/0x80 @ 1 initcall watchdog_init+0x0/0x80 returned 0 after 0 usecs calling nmi_warning_debugfs+0x0/0x30 @ 1 initcall nmi_warning_debugfs+0x0/0x30 returned 0 after 0 usecs calling save_microcode_in_initrd+0x0/0x68 @ 1 initcall save_microcode_in_initrd+0x0/0x68 returned 0 after 0 usecs calling hpet_late_init+0x0/0x118 @ 1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 24.000000 MHz counter initcall hpet_late_init+0x0/0x118 returned 0 after 16000 usecs calling iomem_init_inode+0x0/0x80 @ 1 initcall iomem_init_inode+0x0/0x80 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x40 @ 1 clocksource: Switched to clocksource tsc-early initcall clocksource_done_booting+0x0/0x40 returned 0 after 6257 usecs calling tracer_init_tracefs+0x0/0xe4 @ 1 initcall tracer_init_tracefs+0x0/0xe4 returned 0 after 1 usecs calling init_trace_printk_function_export+0x0/0x2c @ 1 initcall init_trace_printk_function_export+0x0/0x2c returned 0 after 1 usecs calling init_graph_tracefs+0x0/0x2c @ 1 initcall init_graph_tracefs+0x0/0x2c returned 0 after 0 usecs calling trace_events_synth_init+0x0/0x4c @ 1 initcall trace_events_synth_init+0x0/0x4c returned 0 after 0 usecs calling bpf_event_init+0x0/0x14 @ 1 initcall bpf_event_init+0x0/0x14 returned 0 after 0 usecs calling init_kprobe_trace+0x0/0x1cc @ 1 initcall init_kprobe_trace+0x0/0x1cc returned 0 after 1 usecs calling init_dynamic_event+0x0/0x2c @ 1 initcall init_dynamic_event+0x0/0x2c returned 0 after 0 usecs calling init_uprobe_trace+0x0/0x64 @ 1 initcall init_uprobe_trace+0x0/0x64 returned 0 after 1 usecs calling bpf_init+0x0/0x50 @ 1 initcall bpf_init+0x0/0x50 returned 0 after 1 usecs calling secretmem_init+0x0/0x50 @ 1 initcall secretmem_init+0x0/0x50 returned 0 after 0 usecs calling init_fs_stat_sysctls+0x0/0x2c @ 1 initcall init_fs_stat_sysctls+0x0/0x2c returned 0 after 5 usecs calling init_fs_exec_sysctls+0x0/0x24 @ 1 initcall init_fs_exec_sysctls+0x0/0x24 returned 0 after 0 usecs calling init_pipe_fs+0x0/0x5c @ 1 initcall init_pipe_fs+0x0/0x5c returned 0 after 5 usecs calling init_fs_namei_sysctls+0x0/0x20 @ 1 initcall init_fs_namei_sysctls+0x0/0x20 returned 0 after 1 usecs calling init_fs_dcache_sysctls+0x0/0x20 @ 1 initcall init_fs_dcache_sysctls+0x0/0x20 returned 0 after 0 usecs calling init_fs_namespace_sysctls+0x0/0x20 @ 1 initcall init_fs_namespace_sysctls+0x0/0x20 returned 0 after 1 usecs calling cgroup_writeback_init+0x0/0x28 @ 1 initcall cgroup_writeback_init+0x0/0x28 returned 0 after 1 usecs calling inotify_user_setup+0x0/0xb8 @ 1 initcall inotify_user_setup+0x0/0xb8 returned 0 after 3 usecs calling eventpoll_init+0x0/0xc0 @ 1 initcall eventpoll_init+0x0/0xc0 returned 0 after 7 usecs calling anon_inode_init+0x0/0x60 @ 1 initcall anon_inode_init+0x0/0x60 returned 0 after 5 usecs calling proc_locks_init+0x0/0x24 @ 1 initcall proc_locks_init+0x0/0x24 returned 0 after 0 usecs calling init_fs_coredump_sysctls+0x0/0x20 @ 1 initcall init_fs_coredump_sysctls+0x0/0x20 returned 0 after 1 usecs calling iomap_init+0x0/0x2c @ 1 initcall iomap_init+0x0/0x2c returned 0 after 6 usecs calling dquot_init+0x0/0x140 @ 1 VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0x140 returned 0 after 12437 usecs calling quota_init+0x0/0x30 @ 1 initcall quota_init+0x0/0x30 returned 0 after 3 usecs calling proc_cmdline_init+0x0/0x38 @ 1 initcall proc_cmdline_init+0x0/0x38 returned 0 after 0 usecs calling proc_consoles_init+0x0/0x24 @ 1 initcall proc_consoles_init+0x0/0x24 returned 0 after 0 usecs calling proc_cpuinfo_init+0x0/0x20 @ 1 initcall proc_cpuinfo_init+0x0/0x20 returned 0 after 0 usecs calling proc_devices_init+0x0/0x28 @ 1 initcall proc_devices_init+0x0/0x28 returned 0 after 0 usecs calling proc_interrupts_init+0x0/0x24 @ 1 initcall proc_interrupts_init+0x0/0x24 returned 0 after 0 usecs calling proc_loadavg_init+0x0/0x28 @ 1 initcall proc_loadavg_init+0x0/0x28 returned 0 after 0 usecs calling proc_meminfo_init+0x0/0x28 @ 1 initcall proc_meminfo_init+0x0/0x28 returned 0 after 0 usecs calling proc_stat_init+0x0/0x20 @ 1 initcall proc_stat_init+0x0/0x20 returned 0 after 0 usecs calling proc_uptime_init+0x0/0x28 @ 1 initcall proc_uptime_init+0x0/0x28 returned 0 after 0 usecs calling proc_version_init+0x0/0x28 @ 1 initcall proc_version_init+0x0/0x28 returned 0 after 0 usecs calling proc_softirqs_init+0x0/0x28 @ 1 initcall proc_softirqs_init+0x0/0x28 returned 0 after 0 usecs calling proc_kcore_init+0x0/0xc4 @ 1 initcall proc_kcore_init+0x0/0xc4 returned 0 after 0 usecs calling vmcore_init+0x0/0x1b4 @ 1 initcall vmcore_init+0x0/0x1b4 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x24 @ 1 initcall proc_kmsg_init+0x0/0x24 returned 0 after 0 usecs calling proc_page_init+0x0/0x50 @ 1 initcall proc_page_init+0x0/0x50 returned 0 after 0 usecs calling init_ramfs_fs+0x0/0x1c @ 1 initcall init_ramfs_fs+0x0/0x1c returned 0 after 0 usecs calling init_hugetlbfs_fs+0x0/0x1f0 @ 1 initcall init_hugetlbfs_fs+0x0/0x1f0 returned 0 after 11 usecs calling aa_create_aafs+0x0/0x380 @ 1 AppArmor: AppArmor Filesystem Enabled initcall aa_create_aafs+0x0/0x380 returned 0 after 5519 usecs calling dynamic_debug_init_control+0x0/0x80 @ 1 initcall dynamic_debug_init_control+0x0/0x80 returned 0 after 2 usecs calling acpi_event_init+0x0/0x40 @ 1 initcall acpi_event_init+0x0/0x40 returned 0 after 2 usecs calling pnp_system_init+0x0/0x1c @ 1 initcall pnp_system_init+0x0/0x1c returned 0 after 4 usecs calling pnpacpi_init+0x0/0x74 @ 1 pnp: PnP ACPI init system 00:00: [io 0x0a00-0x0a3f] has been reserved system 00:00: [io 0x0a40-0x0a7f] has been reserved pnp 00:01: [dma 0 disabled] system 00:02: [io 0x0680-0x069f] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0x1800-0x18fe] has been reserved system 00:02: [io 0x164e-0x164f] has been reserved system 00:03: [io 0x0800-0x087f] has been reserved system 00:05: [io 0x1854-0x1857] has been reserved system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:06: [mem 0xff000000-0xffffffff] has been reserved system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been reserved system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved system 00:08: [io 0xff00-0xfffe] has been reserved system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved pnp: PnP ACPI: found 10 devices initcall pnpacpi_init+0x0/0x74 returned 0 after 236170 usecs calling pnpbios_init+0x0/0x1ec @ 1 PnPBIOS: Disabled by ACPI PNP initcall pnpbios_init+0x0/0x1ec returned -19 after 4783 usecs calling chr_dev_init+0x0/0xd0 @ 1 initcall chr_dev_init+0x0/0xd0 returned 0 after 856 usecs calling firmware_class_init+0x0/0x100 @ 1 initcall firmware_class_init+0x0/0x100 returned 0 after 4 usecs calling init_acpi_pm_clocksource+0x0/0x1c0 @ 1 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns initcall init_acpi_pm_clocksource+0x0/0x1c0 returned 0 after 44709 usecs calling powercap_init+0x0/0x2c @ 1 initcall powercap_init+0x0/0x2c returned 0 after 15 usecs calling sysctl_core_init+0x0/0x2c @ 1 initcall sysctl_core_init+0x0/0x2c returned 0 after 13 usecs calling eth_offload_init+0x0/0x18 @ 1 initcall eth_offload_init+0x0/0x18 returned 0 after 0 usecs calling ipv4_offload_init+0x0/0x90 @ 1 initcall ipv4_offload_init+0x0/0x90 returned 0 after 0 usecs calling inet_init+0x0/0x2c0 @ 1 NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) initcall inet_init+0x0/0x2c0 returned 0 after 70719 usecs calling af_unix_init+0x0/0x13c @ 1 NET: Registered PF_UNIX/PF_LOCAL protocol family initcall af_unix_init+0x0/0x13c returned 0 after 6431 usecs calling ipv6_offload_init+0x0/0x88 @ 1 initcall ipv6_offload_init+0x0/0x88 returned 0 after 0 usecs calling init_sunrpc+0x0/0x9c @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x9c returned 0 after 24898 usecs calling vlan_offload_init+0x0/0x24 @ 1 initcall vlan_offload_init+0x0/0x24 returned 0 after 0 usecs calling xsk_init+0x0/0x110 @ 1 NET: Registered PF_XDP protocol family initcall xsk_init+0x0/0x110 returned 0 after 5563 usecs calling pcibios_assign_resources+0x0/0xbc @ 1 pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:02:00.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xa4000000-0xf7ffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] initcall pcibios_assign_resources+0x0/0xbc returned 0 after 54386 usecs calling pci_apply_final_quirks+0x0/0x170 @ 1 pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x164 @ 1 IOAPIC[0]: Preconfigured routing entry (2-16 -> IRQ 16 Level:1 ActiveLow:1) pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x164 took 8700 usecs pci 0000:00:1f.6: calling quirk_e100_interrupt+0x0/0x1ac @ 1 pci 0000:00:1f.6: quirk_e100_interrupt+0x0/0x1ac took 0 usecs PCI: CLS 0 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x170 returned 0 after 45440 usecs calling acpi_reserve_resources+0x0/0xe4 @ 1 initcall acpi_reserve_resources+0x0/0xe4 returned 0 after 0 usecs calling populate_rootfs+0x0/0x54 @ 1 initcall populate_rootfs+0x0/0x54 returned 0 after 0 usecs Trying to unpack rootfs image as initramfs... calling pci_iommu_init+0x0/0x3c @ 1 initcall pci_iommu_init+0x0/0x3c returned 0 after 0 usecs calling amd_ibs_init+0x0/0x190 @ 1 initcall amd_ibs_init+0x0/0x190 returned -19 after 0 usecs calling msr_init+0x0/0x60 @ 1 initcall msr_init+0x0/0x60 returned 0 after 4 usecs calling register_kernel_offset_dumper+0x0/0x1c @ 1 initcall register_kernel_offset_dumper+0x0/0x1c returned 0 after 0 usecs calling i8259A_init_ops+0x0/0x30 @ 1 initcall i8259A_init_ops+0x0/0x30 returned 0 after 0 usecs calling init_tsc_clocksource+0x0/0xbc @ 1 initcall init_tsc_clocksource+0x0/0xbc returned 0 after 1 usecs calling add_rtc_cmos+0x0/0xc0 @ 1 initcall add_rtc_cmos+0x0/0xc0 returned 0 after 1 usecs calling i8237A_init_ops+0x0/0x4c @ 1 initcall i8237A_init_ops+0x0/0x4c returned -19 after 3 usecs calling umwait_init+0x0/0x90 @ 1 initcall umwait_init+0x0/0x90 returned -19 after 0 usecs calling ioapic_init_ops+0x0/0x18 @ 1 initcall ioapic_init_ops+0x0/0x18 returned 0 after 6 usecs calling register_e820_pmem+0x0/0x70 @ 1 initcall register_e820_pmem+0x0/0x70 returned 0 after 2 usecs calling add_pcspkr+0x0/0x70 @ 1 initcall add_pcspkr+0x0/0x70 returned 0 after 20 usecs calling pt_dump_init+0x0/0x70 @ 1 initcall pt_dump_init+0x0/0x70 returned 0 after 0 usecs calling iosf_mbi_init+0x0/0x38 @ 1 initcall iosf_mbi_init+0x0/0x38 returned 0 after 11 usecs calling proc_execdomains_init+0x0/0x30 @ 1 initcall proc_execdomains_init+0x0/0x30 returned 0 after 2 usecs calling register_warn_debugfs+0x0/0x24 @ 1 initcall register_warn_debugfs+0x0/0x24 returned 0 after 3 usecs calling cpuhp_sysfs_init+0x0/0xa4 @ 1 initcall cpuhp_sysfs_init+0x0/0xa4 returned 0 after 13 usecs calling ioresources_init+0x0/0x40 @ 1 initcall ioresources_init+0x0/0x40 returned 0 after 3 usecs calling snapshot_device_init+0x0/0x14 @ 1 initcall snapshot_device_init+0x0/0x14 returned 0 after 24 usecs calling irq_gc_init_ops+0x0/0x18 @ 1 initcall irq_gc_init_ops+0x0/0x18 returned 0 after 0 usecs calling irq_pm_init_ops+0x0/0x18 @ 1 initcall irq_pm_init_ops+0x0/0x18 returned 0 after 0 usecs calling proc_modules_init+0x0/0x2c @ 1 initcall proc_modules_init+0x0/0x2c returned 0 after 2 usecs calling timer_sysctl_init+0x0/0x1c @ 1 initcall timer_sysctl_init+0x0/0x1c returned 0 after 2 usecs calling timekeeping_init_ops+0x0/0x18 @ 1 initcall timekeeping_init_ops+0x0/0x18 returned 0 after 0 usecs calling init_clocksource_sysfs+0x0/0x30 @ 1 initcall init_clocksource_sysfs+0x0/0x30 returned 0 after 24 usecs calling init_timer_list_procfs+0x0/0x38 @ 1 initcall init_timer_list_procfs+0x0/0x38 returned 0 after 1 usecs calling alarmtimer_init+0x0/0xd0 @ 1 initcall alarmtimer_init+0x0/0xd0 returned 0 after 8 usecs calling init_posix_timers+0x0/0x2c @ 1 initcall init_posix_timers+0x0/0x2c returned 0 after 7 usecs calling clockevents_init_sysfs+0x0/0x110 @ 1 initcall clockevents_init_sysfs+0x0/0x110 returned 0 after 67 usecs calling proc_dma_init+0x0/0x2c @ 1 initcall proc_dma_init+0x0/0x2c returned 0 after 1 usecs calling kallsyms_init+0x0/0x24 @ 1 initcall kallsyms_init+0x0/0x24 returned 0 after 0 usecs calling pid_namespaces_init+0x0/0x4c @ 1 initcall pid_namespaces_init+0x0/0x4c returned 0 after 11 usecs calling ikconfig_init+0x0/0x4c @ 1 initcall ikconfig_init+0x0/0x4c returned 0 after 0 usecs calling audit_watch_init+0x0/0x40 @ 1 initcall audit_watch_init+0x0/0x40 returned 0 after 0 usecs calling audit_fsnotify_init+0x0/0x50 @ 1 initcall audit_fsnotify_init+0x0/0x50 returned 0 after 0 usecs calling audit_tree_init+0x0/0x90 @ 1 initcall audit_tree_init+0x0/0x90 returned 0 after 1 usecs calling seccomp_sysctl_init+0x0/0x30 @ 1 initcall seccomp_sysctl_init+0x0/0x30 returned 0 after 4 usecs calling utsname_sysctl_init+0x0/0x18 @ 1 initcall utsname_sysctl_init+0x0/0x18 returned 0 after 6 usecs calling init_tracepoints+0x0/0x38 @ 1 initcall init_tracepoints+0x0/0x38 returned 0 after 0 usecs calling init_lstats_procfs+0x0/0x44 @ 1 initcall init_lstats_procfs+0x0/0x44 returned 0 after 4 usecs calling stack_trace_init+0x0/0xa0 @ 1 initcall stack_trace_init+0x0/0xa0 returned 0 after 4 usecs calling init_mmio_trace+0x0/0x10 @ 1 initcall init_mmio_trace+0x0/0x10 returned 0 after 1 usecs calling perf_event_sysfs_init+0x0/0x98 @ 1 initcall perf_event_sysfs_init+0x0/0x98 returned 0 after 95 usecs calling system_trusted_keyring_init+0x0/0xe4 @ 1 Initialise system trusted keyrings initcall system_trusted_keyring_init+0x0/0xe4 returned 0 after 5224 usecs calling blacklist_init+0x0/0xe0 @ 1 Key type blacklist registered initcall blacklist_init+0x0/0xe0 returned 0 after 4785 usecs calling kswapd_init+0x0/0x80 @ 1 initcall kswapd_init+0x0/0x80 returned 0 after 36 usecs calling extfrag_debug_init+0x0/0x50 @ 1 initcall extfrag_debug_init+0x0/0x50 returned 0 after 4 usecs calling mm_compute_batch_init+0x0/0x20 @ 1 initcall mm_compute_batch_init+0x0/0x20 returned 0 after 0 usecs calling slab_proc_init+0x0/0x24 @ 1 initcall slab_proc_init+0x0/0x24 returned 0 after 2 usecs calling workingset_init+0x0/0xc0 @ 1 workingset: timestamp_bits=11 max_order=20 bucket_order=9 initcall workingset_init+0x0/0xc0 returned 0 after 7216 usecs calling proc_vmalloc_init+0x0/0x30 @ 1 initcall proc_vmalloc_init+0x0/0x30 returned 0 after 1 usecs calling procswaps_init+0x0/0x20 @ 1 initcall procswaps_init+0x0/0x20 returned 0 after 1 usecs calling init_frontswap+0x0/0x8c @ 1 initcall init_frontswap+0x0/0x8c returned 0 after 4 usecs calling slab_debugfs_init+0x0/0x60 @ 1 initcall slab_debugfs_init+0x0/0x60 returned 0 after 4 usecs calling init_zbud+0x0/0x24 @ 1 zbud: loaded initcall init_zbud+0x0/0x24 returned 0 after 3316 usecs calling fcntl_init+0x0/0x34 @ 1 initcall fcntl_init+0x0/0x34 returned 0 after 1 usecs calling proc_filesystems_init+0x0/0x24 @ 1 initcall proc_filesystems_init+0x0/0x24 returned 0 after 1 usecs calling start_dirtytime_writeback+0x0/0x34 @ 1 initcall start_dirtytime_writeback+0x0/0x34 returned 0 after 0 usecs calling dio_init+0x0/0x2c @ 1 initcall dio_init+0x0/0x2c returned 0 after 4 usecs calling dnotify_init+0x0/0x8c @ 1 initcall dnotify_init+0x0/0x8c returned 0 after 5 usecs calling fanotify_user_setup+0x0/0x11c @ 1 initcall fanotify_user_setup+0x0/0x11c returned 0 after 5 usecs calling aio_setup+0x0/0x90 @ 1 initcall aio_setup+0x0/0x90 returned 0 after 16 usecs calling init_grace+0x0/0x14 @ 1 initcall init_grace+0x0/0x14 returned 0 after 1 usecs calling init_devpts_fs+0x0/0x34 @ 1 initcall init_devpts_fs+0x0/0x34 returned 0 after 5 usecs calling init_nfs_fs+0x0/0x180 @ 1 initcall init_nfs_fs+0x0/0x180 returned 0 after 50 usecs calling init_nfs_v3+0x0/0x24 @ 1 initcall init_nfs_v3+0x0/0x24 returned 0 after 0 usecs calling init_nlm+0x0/0x60 @ 1 initcall init_nlm+0x0/0x60 returned 0 after 4 usecs calling init_v9fs+0x0/0x100 @ 1 9p: Installing v9fs 9p2000 file system support initcall init_v9fs+0x0/0x100 returned 0 after 6273 usecs calling ipc_init+0x0/0x28 @ 1 initcall ipc_init+0x0/0x28 returned 0 after 6 usecs calling ipc_sysctl_init+0x0/0x38 @ 1 initcall ipc_sysctl_init+0x0/0x38 returned 0 after 11 usecs calling init_mqueue_fs+0x0/0xbc @ 1 initcall init_mqueue_fs+0x0/0xbc returned 0 after 17 usecs calling key_proc_init+0x0/0x5c @ 1 initcall key_proc_init+0x0/0x5c returned 0 after 1 usecs calling asymmetric_key_init+0x0/0x14 @ 1 Key type asymmetric registered initcall asymmetric_key_init+0x0/0x14 returned 0 after 4871 usecs calling x509_key_init+0x0/0x1c @ 1 Asymmetric key parser 'x509' registered initcall x509_key_init+0x0/0x1c returned 0 after 5650 usecs calling crypto_kdf108_init+0x0/0xc @ 1 initcall crypto_kdf108_init+0x0/0xc returned 0 after 0 usecs calling blkdev_init+0x0/0x20 @ 1 initcall blkdev_init+0x0/0x20 returned 0 after 9 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs calling init_emergency_pool+0x0/0xe0 @ 1 bounce: pool size: 64 pages initcall init_emergency_pool+0x0/0xe0 returned 0 after 4622 usecs calling bsg_init+0x0/0x9c @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) initcall bsg_init+0x0/0x9c returned 0 after 8172 usecs calling throtl_init+0x0/0x38 @ 1 initcall throtl_init+0x0/0x38 returned 0 after 24 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler mq-deadline registered initcall deadline_init+0x0/0x14 returned 0 after 5304 usecs calling io_uring_init+0x0/0x40 @ 1 initcall io_uring_init+0x0/0x40 returned 0 after 2 usecs calling blake2s_mod_init+0x0/0xc @ 1 initcall blake2s_mod_init+0x0/0xc returned 0 after 0 usecs calling crc_t10dif_mod_init+0x0/0x50 @ 1 initcall crc_t10dif_mod_init+0x0/0x50 returned 0 after 19 usecs calling percpu_counter_startup+0x0/0x60 @ 1 tsc: Refined TSC clocksource calibration: 3408.011 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fde6824f, max_idle_ns: 440795267384 ns clocksource: Switched to clocksource tsc initcall percpu_counter_startup+0x0/0x60 returned 0 after 17794 usecs calling audit_classes_init+0x0/0x50 @ 1 initcall audit_classes_init+0x0/0x50 returned 0 after 5 usecs calling digsig_init+0x0/0x40 @ 1 initcall digsig_init+0x0/0x40 returned 0 after 2 usecs calling phy_core_init+0x0/0x50 @ 1 initcall phy_core_init+0x0/0x50 returned 0 after 10 usecs calling pcie_portdrv_init+0x0/0x50 @ 1 IOAPIC[0]: Preconfigured routing entry (2-16 -> IRQ 16 Level:1 ActiveLow:1) pcieport 0000:00:01.0: PME: Signaling with IRQ 120 pcieport 0000:00:1c.0: PME: Signaling with IRQ 121 pcieport 0000:00:1c.0: AER: enabled with IRQ 121 initcall pcie_portdrv_init+0x0/0x50 returned 0 after 28763 usecs calling pci_proc_init+0x0/0x70 @ 1 initcall pci_proc_init+0x0/0x70 returned 0 after 10 usecs calling pci_hotplug_init+0x0/0x44 @ 1 initcall pci_hotplug_init+0x0/0x44 returned 0 after 0 usecs calling shpcd_init+0x0/0x5c @ 1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x5c returned 0 after 7489 usecs calling vesafb_driver_init+0x0/0x18 @ 1 initcall vesafb_driver_init+0x0/0x18 returned 0 after 8 usecs calling efifb_driver_init+0x0/0x1c @ 1 initcall efifb_driver_init+0x0/0x1c returned 0 after 4 usecs calling intel_idle_init+0x0/0x36c @ 1 initcall intel_idle_init+0x0/0x36c returned 0 after 358 usecs calling ged_driver_init+0x0/0x20 @ 1 initcall ged_driver_init+0x0/0x20 returned 0 after 10 usecs calling acpi_processor_driver_init+0x0/0xc0 @ 1 initcall acpi_processor_driver_init+0x0/0xc0 returned 0 after 182 usecs calling acpi_hed_driver_init+0x0/0x18 @ 1 initcall acpi_hed_driver_init+0x0/0x18 returned 0 after 28 usecs calling erst_init+0x0/0x334 @ 1 initcall erst_init+0x0/0x334 returned 0 after 0 usecs calling extlog_init+0x0/0x3c0 @ 1 initcall extlog_init+0x0/0x3c0 returned -19 after 0 usecs calling pnpbios_thread_init+0x0/0x6c @ 1 initcall pnpbios_thread_init+0x0/0x6c returned 0 after 0 usecs calling isapnp_init+0x0/0x2e4 @ 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found initcall isapnp_init+0x0/0x2e4 returned 0 after 364809 usecs calling gpio_clk_driver_init+0x0/0x18 @ 1 initcall gpio_clk_driver_init+0x0/0x18 returned 0 after 10 usecs calling plt_clk_driver_init+0x0/0x18 @ 1 initcall plt_clk_driver_init+0x0/0x18 returned 0 after 2 usecs calling n_null_init+0x0/0x30 @ 1 initcall n_null_init+0x0/0x30 returned 0 after 0 usecs calling pty_init+0x0/0x18 @ 1 initcall pty_init+0x0/0x18 returned 0 after 62 usecs calling sysrq_init+0x0/0x80 @ 1 initcall sysrq_init+0x0/0x80 returned 0 after 2 usecs calling serial8250_init+0x0/0x1e4 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A initcall serial8250_init+0x0/0x1e4 returned 0 after 16717 usecs calling serial_pci_driver_init+0x0/0x1c @ 1 initcall serial_pci_driver_init+0x0/0x1c returned 0 after 10 usecs calling pci1xxxx_pci_driver_init+0x0/0x1c @ 1 initcall pci1xxxx_pci_driver_init+0x0/0x1c returned 0 after 3 usecs calling dw8250_platform_driver_init+0x0/0x18 @ 1 initcall dw8250_platform_driver_init+0x0/0x18 returned 0 after 9 usecs calling mid8250_pci_driver_init+0x0/0x1c @ 1 initcall mid8250_pci_driver_init+0x0/0x1c returned 0 after 7 usecs calling pericom8250_pci_driver_init+0x0/0x1c @ 1 initcall pericom8250_pci_driver_init+0x0/0x1c returned 0 after 5 usecs calling random_sysctls_init+0x0/0x20 @ 1 initcall random_sysctls_init+0x0/0x20 returned 0 after 6 usecs calling hpet_init+0x0/0x7c @ 1 initcall hpet_init+0x0/0x7c returned 0 after 201 usecs calling agp_init+0x0/0x30 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x30 returned 0 after 4883 usecs calling agp_ali_init+0x0/0x30 @ 1 initcall agp_ali_init+0x0/0x30 returned 0 after 7 usecs calling agp_ati_init+0x0/0x30 @ 1 initcall agp_ati_init+0x0/0x30 returned 0 after 4 usecs calling agp_efficeon_init+0x0/0x50 @ 1 initcall agp_efficeon_init+0x0/0x50 returned 0 after 4 usecs calling agp_intel_init+0x0/0x30 @ 1 initcall agp_intel_init+0x0/0x30 returned 0 after 9 usecs calling agp_nvidia_init+0x0/0x30 @ 1 initcall agp_nvidia_init+0x0/0x30 returned 0 after 5 usecs calling agp_sis_init+0x0/0x30 @ 1 initcall agp_sis_init+0x0/0x30 returned 0 after 5 usecs calling agp_serverworks_init+0x0/0x30 @ 1 initcall agp_serverworks_init+0x0/0x30 returned 0 after 6 usecs calling agp_via_init+0x0/0x30 @ 1 initcall agp_via_init+0x0/0x30 returned 0 after 6 usecs calling cn_proc_init+0x0/0x44 @ 1 initcall cn_proc_init+0x0/0x44 returned 0 after 0 usecs calling topology_sysfs_init+0x0/0x2c @ 1 initcall topology_sysfs_init+0x0/0x2c returned 0 after 37 usecs calling cacheinfo_sysfs_init+0x0/0x2c @ 1 initcall cacheinfo_sysfs_init+0x0/0x2c returned 0 after 510 usecs calling spidev_init+0x0/0xb8 @ 1 initcall spidev_init+0x0/0xb8 returned 0 after 9 usecs calling blackhole_netdev_init+0x0/0x68 @ 1 initcall blackhole_netdev_init+0x0/0x68 returned 0 after 7 usecs calling fixed_mdio_bus_init+0x0/0xf4 @ 1 initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 59 usecs calling phy_module_init+0x0/0x1c @ 1 initcall phy_module_init+0x0/0x1c returned 0 after 43 usecs calling e1000_init_module+0x0/0x74 @ 1 e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. initcall e1000_init_module+0x0/0x74 returned 0 after 12202 usecs calling e1000_init_module+0x0/0x30 @ 1 e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. IOAPIC[0]: Preconfigured routing entry (2-19 -> IRQ 19 Level:1 ActiveLow:1) e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:8e:38:7c:5b:de e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF initcall e1000_init_module+0x0/0x30 returned 0 after 374525 usecs calling igb_init_module+0x0/0x3c @ 1 igb: Intel(R) Gigabit Ethernet Network Driver igb: Copyright (c) 2007-2014 Intel Corporation. initcall igb_init_module+0x0/0x3c returned 0 after 12534 usecs calling igc_init_module+0x0/0x40 @ 1 Intel(R) 2.5G Ethernet Linux Driver Copyright(c) 2018 Intel Corporation. initcall igc_init_module+0x0/0x40 returned 0 after 10724 usecs calling ixgbe_init_module+0x0/0xa0 @ 1 ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver ixgbe: Copyright (c) 1999-2016 Intel Corporation. initcall ixgbe_init_module+0x0/0xa0 returned 0 after 13536 usecs calling i40e_init_module+0x0/0xa8 @ 1 i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. initcall i40e_init_module+0x0/0xa8 returned 0 after 13838 usecs calling rtl8169_pci_driver_init+0x0/0x28 @ 1 initcall rtl8169_pci_driver_init+0x0/0x28 returned 0 after 5 usecs calling netvsc_drv_init+0x0/0x70 @ 1 hv_vmbus: registering driver hv_netvsc initcall netvsc_drv_init+0x0/0x70 returned -19 after 5574 usecs calling i8042_init+0x0/0x110 @ 1 i8042: PNP: No PS/2 controller found. initcall i8042_init+0x0/0x110 returned 0 after 5546 usecs calling input_leds_init+0x0/0x18 @ 1 initcall input_leds_init+0x0/0x18 returned 0 after 3 usecs calling mousedev_init+0x0/0xd0 @ 1 mousedev: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0xd0 returned 0 after 6591 usecs calling atkbd_init+0x0/0x28 @ 1 initcall atkbd_init+0x0/0x28 returned 0 after 13 usecs calling cmos_init+0x0/0x74 @ 1 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: registered as rtc0 rtc_cmos 00:04: setting system clock to 2023-03-17T22:56:33 UTC (1679093793) rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram initcall cmos_init+0x0/0x74 returned 0 after 27979 usecs calling thermal_throttle_init_device+0x0/0x48 @ 1 initcall thermal_throttle_init_device+0x0/0x48 returned 0 after 368 usecs calling watchdog_gov_noop_register+0x0/0x14 @ 1 initcall watchdog_gov_noop_register+0x0/0x14 returned 0 after 0 usecs calling esb_driver_init+0x0/0x1c @ 1 initcall esb_driver_init+0x0/0x1c returned 0 after 11 usecs calling iTCO_wdt_driver_init+0x0/0x18 @ 1 initcall iTCO_wdt_driver_init+0x0/0x18 returned 0 after 7 usecs calling iTCO_vendor_init_module+0x0/0x40 @ 1 iTCO_vendor_support: vendor-support=0 initcall iTCO_vendor_init_module+0x0/0x40 returned 0 after 5488 usecs calling intel_pstate_init+0x0/0x7d4 @ 1 intel_pstate: HWP enabled by BIOS intel_pstate: Intel P-state driver initializing intel_pstate: HWP enabled initcall intel_pstate_init+0x0/0x7d4 returned 0 after 16323 usecs calling haltpoll_init+0x0/0x110 @ 1 initcall haltpoll_init+0x0/0x110 returned -19 after 0 usecs calling ledtrig_disk_init+0x0/0x48 @ 1 initcall ledtrig_disk_init+0x0/0x48 returned 0 after 1 usecs calling ledtrig_cpu_init+0x0/0x120 @ 1 ledtrig-cpu: registered to indicate activity on CPUs initcall ledtrig_cpu_init+0x0/0x120 returned 0 after 7101 usecs calling ledtrig_panic_init+0x0/0x40 @ 1 initcall ledtrig_panic_init+0x0/0x40 returned 0 after 1 usecs calling dmi_sysfs_init+0x0/0x118 @ 1 initcall dmi_sysfs_init+0x0/0x118 returned 0 after 214 usecs calling sysfb_init+0x0/0xc0 @ 1 initcall sysfb_init+0x0/0xc0 returned 0 after 25 usecs calling esrt_sysfs_init+0x0/0x1dc @ 1 initcall esrt_sysfs_init+0x0/0x1dc returned -38 after 0 usecs calling efi_capsule_loader_init+0x0/0x50 @ 1 initcall efi_capsule_loader_init+0x0/0x50 returned -19 after 0 usecs calling pmc_atom_init+0x0/0x58 @ 1 initcall pmc_atom_init+0x0/0x58 returned -19 after 4 usecs calling vmgenid_driver_init+0x0/0x18 @ 1 initcall vmgenid_driver_init+0x0/0x18 returned 0 after 34 usecs calling sock_diag_init+0x0/0x3c @ 1 initcall sock_diag_init+0x0/0x3c returned 0 after 11 usecs calling blackhole_init+0x0/0x1c @ 1 initcall blackhole_init+0x0/0x1c returned 0 after 0 usecs calling gre_offload_init+0x0/0x54 @ 1 initcall gre_offload_init+0x0/0x54 returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x4c @ 1 initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 44 usecs calling cubictcp_register+0x0/0x90 @ 1 initcall cubictcp_register+0x0/0x90 returned 0 after 0 usecs calling inet6_init+0x0/0x380 @ 1 NET: Registered PF_INET6 protocol family Freeing initrd memory: 362336K Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 initcall inet6_init+0x0/0x380 returned 0 after 794804 usecs calling mip6_init+0x0/0xb8 @ 1 mip6: Mobile IPv6 initcall mip6_init+0x0/0xb8 returned 0 after 3736 usecs calling packet_init+0x0/0x80 @ 1 NET: Registered PF_PACKET protocol family initcall packet_init+0x0/0x80 returned 0 after 5855 usecs calling init_p9+0x0/0x2c @ 1 9pnet: Installing 9P2000 support initcall init_p9+0x0/0x2c returned 0 after 5066 usecs calling p9_trans_fd_init+0x0/0x2c @ 1 initcall p9_trans_fd_init+0x0/0x2c returned 0 after 0 usecs calling dcbnl_init+0x0/0x50 @ 1 initcall dcbnl_init+0x0/0x50 returned 0 after 0 usecs calling mpls_gso_init+0x0/0x2c @ 1 mpls_gso: MPLS GSO support initcall mpls_gso_init+0x0/0x2c returned 0 after 4534 usecs calling pm_check_save_msr+0x0/0x2c @ 1 initcall pm_check_save_msr+0x0/0x2c returned 0 after 2 usecs calling mcheck_init_device+0x0/0x13c @ 1 initcall mcheck_init_device+0x0/0x13c returned 0 after 670 usecs calling dev_mcelog_init_device+0x0/0xe0 @ 1 initcall dev_mcelog_init_device+0x0/0xe0 returned 0 after 51 usecs calling kernel_do_mounts_initrd_sysctls_init+0x0/0x20 @ 1 initcall kernel_do_mounts_initrd_sysctls_init+0x0/0x20 returned 0 after 2 usecs calling sld_mitigate_sysctl_init+0x0/0x20 @ 1 initcall sld_mitigate_sysctl_init+0x0/0x20 returned 0 after 0 usecs calling mcheck_late_init+0x0/0x74 @ 1 initcall mcheck_late_init+0x0/0x74 returned 0 after 3 usecs calling severities_debugfs_init+0x0/0x38 @ 1 initcall severities_debugfs_init+0x0/0x38 returned 0 after 0 usecs calling microcode_init+0x0/0x184 @ 1 microcode: Microcode Update Driver: v2.2. initcall microcode_init+0x0/0x184 returned 0 after 97 usecs calling hpet_insert_resource+0x0/0x28 @ 1 initcall hpet_insert_resource+0x0/0x28 returned 0 after 1 usecs calling start_sync_check_timer+0x0/0x60 @ 1 initcall start_sync_check_timer+0x0/0x60 returned 0 after 0 usecs calling update_mp_table+0x0/0x30c @ 1 initcall update_mp_table+0x0/0x30c returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x50 @ 1 initcall lapic_insert_resource+0x0/0x50 returned 0 after 0 usecs calling print_ipi_mode+0x0/0x38 @ 1 IPI shorthand broadcast: enabled initcall print_ipi_mode+0x0/0x38 returned 0 after 5060 usecs calling print_ICs+0x0/0xcc @ 1 ... APIC ID: 00000000 (0) ... APIC VERSION: 01060015 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000001000 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 120. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00770020 ....... : max redirection entries: 77 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: IOAPIC 0: pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(0001), M(0) pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin08, enabled , edge , high, V(21), IRR(0), S(0), logical , D(0020), M(0) pin09, enabled , level, high, V(21), IRR(0), S(0), logical , D(0002), M(0) pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0b, disabled, edge , high, V(04), IRR(0), S(0), physical, D(0080), M(2) pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0d, disabled, edge , high, V(00), IRR(0), S(0), remapped, I(0092), Z(2) pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(2) pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin20, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin21, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin22, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin23, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin24, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin25, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin26, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin27, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin28, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin29, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin2f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin30, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin31, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin32, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin33, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin34, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin35, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin36, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin37, disabled, edge , high, V(02), IRR(0), S(0), physical, D(0000), M(2) pin38, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin39, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0400), M(2) pin3c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin3f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin40, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin41, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin42, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin43, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin44, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin45, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin46, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin47, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin48, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin49, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4a, disabled, edge , high, V(01), IRR(0), S(0), logical , D(0240), M(2) pin4b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0100), M(2) pin4d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin4f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin50, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin51, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin52, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin53, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin54, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin55, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin56, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin57, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin58, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin59, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin5e, disabled, edge , high, V(00), IRR(0), S(0), remapped, I(4544), Z(2) pin5f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin60, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin61, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin62, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin63, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin64, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin65, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin66, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin67, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin68, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin69, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0288), M(2) pin6c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin6f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin70, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin71, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin72, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin73, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin74, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin75, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) pin76, disabled, edge , high, V(81), IRR(0), S(0), physical, D(0028), M(2) pin77, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0) IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ19 -> 0:19 .................................... done. initcall print_ICs+0x0/0xcc returned 0 after 1234287 usecs calling setup_efi_kvm_sev_migration+0x0/0xc @ 1 initcall setup_efi_kvm_sev_migration+0x0/0xc returned 0 after 0 usecs calling create_tlb_single_page_flush_ceiling+0x0/0x34 @ 1 initcall create_tlb_single_page_flush_ceiling+0x0/0x34 returned 0 after 36 usecs calling pat_memtype_list_init+0x0/0x40 @ 1 initcall pat_memtype_list_init+0x0/0x40 returned 0 after 1 usecs calling kernel_panic_sysctls_init+0x0/0x20 @ 1 initcall kernel_panic_sysctls_init+0x0/0x20 returned 0 after 2 usecs calling kernel_panic_sysfs_init+0x0/0x20 @ 1 initcall kernel_panic_sysfs_init+0x0/0x20 returned 0 after 3 usecs calling kernel_exit_sysctls_init+0x0/0x20 @ 1 initcall kernel_exit_sysctls_init+0x0/0x20 returned 0 after 0 usecs calling kernel_exit_sysfs_init+0x0/0x2c @ 1 initcall kernel_exit_sysfs_init+0x0/0x2c returned 0 after 0 usecs calling param_sysfs_builtin_init+0x0/0x78 @ 1 initcall param_sysfs_builtin_init+0x0/0x78 returned 0 after 711 usecs calling reboot_ksysfs_init+0x0/0x64 @ 1 initcall reboot_ksysfs_init+0x0/0x64 returned 0 after 4 usecs calling sched_core_sysctl_init+0x0/0x20 @ 1 initcall sched_core_sysctl_init+0x0/0x20 returned 0 after 0 usecs calling sched_fair_sysctl_init+0x0/0x20 @ 1 initcall sched_fair_sysctl_init+0x0/0x20 returned 0 after 1 usecs calling sched_rt_sysctl_init+0x0/0x20 @ 1 initcall sched_rt_sysctl_init+0x0/0x20 returned 0 after 1 usecs calling sched_dl_sysctl_init+0x0/0x20 @ 1 initcall sched_dl_sysctl_init+0x0/0x20 returned 0 after 1 usecs calling sched_clock_init_late+0x0/0x98 @ 1 sched_clock: Marking stable (10731448149, 2340550981)->(14449646990, -1377647860) initcall sched_clock_init_late+0x0/0x98 returned 0 after 9446 usecs calling sched_init_debug+0x0/0x174 @ 1 initcall sched_init_debug+0x0/0x174 returned 0 after 93 usecs calling cpu_latency_qos_init+0x0/0x40 @ 1 initcall cpu_latency_qos_init+0x0/0x40 returned 0 after 108 usecs calling pm_debugfs_init+0x0/0x24 @ 1 initcall pm_debugfs_init+0x0/0x24 returned 0 after 1 usecs calling printk_late_init+0x0/0x154 @ 1 initcall printk_late_init+0x0/0x154 returned 0 after 7 usecs calling init_srcu_module_notifier+0x0/0x34 @ 1 initcall init_srcu_module_notifier+0x0/0x34 returned 0 after 0 usecs calling swiotlb_create_default_debugfs+0x0/0x60 @ 1 initcall swiotlb_create_default_debugfs+0x0/0x60 returned 0 after 0 usecs calling tk_debug_sleep_time_init+0x0/0x2c @ 1 initcall tk_debug_sleep_time_init+0x0/0x2c returned 0 after 1 usecs calling bpf_ksym_iter_register+0x0/0x20 @ 1 initcall bpf_ksym_iter_register+0x0/0x20 returned 0 after 0 usecs calling kernel_acct_sysctls_init+0x0/0x24 @ 1 initcall kernel_acct_sysctls_init+0x0/0x24 returned 0 after 0 usecs calling kexec_core_sysctl_init+0x0/0x20 @ 1 initcall kexec_core_sysctl_init+0x0/0x20 returned 0 after 1 usecs calling bpf_rstat_kfunc_init+0x0/0x1c @ 1 initcall bpf_rstat_kfunc_init+0x0/0x1c returned 0 after 0 usecs calling debugfs_kprobe_init+0x0/0x68 @ 1 initcall debugfs_kprobe_init+0x0/0x68 returned 0 after 2 usecs calling kernel_delayacct_sysctls_init+0x0/0x2c @ 1 initcall kernel_delayacct_sysctls_init+0x0/0x2c returned 0 after 0 usecs calling taskstats_init+0x0/0x38 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x38 returned 0 after 4904 usecs calling ftrace_sysctl_init+0x0/0x1c @ 1 initcall ftrace_sysctl_init+0x0/0x1c returned 0 after 0 usecs calling bpf_key_sig_kfuncs_init+0x0/0x14 @ 1 initcall bpf_key_sig_kfuncs_init+0x0/0x14 returned 0 after 0 usecs calling bpf_global_ma_init+0x0/0x24 @ 1 initcall bpf_global_ma_init+0x0/0x24 returned 0 after 22 usecs calling bpf_syscall_sysctl_init+0x0/0x28 @ 1 initcall bpf_syscall_sysctl_init+0x0/0x28 returned 0 after 1 usecs calling kfunc_init+0x0/0xb0 @ 1 initcall kfunc_init+0x0/0xb0 returned 0 after 0 usecs calling bpf_map_iter_init+0x0/0x34 @ 1 initcall bpf_map_iter_init+0x0/0x34 returned 0 after 0 usecs calling task_iter_init+0x0/0x118 @ 1 initcall task_iter_init+0x0/0x118 returned 0 after 0 usecs calling bpf_prog_iter_init+0x0/0x20 @ 1 initcall bpf_prog_iter_init+0x0/0x20 returned 0 after 0 usecs calling bpf_link_iter_init+0x0/0x20 @ 1 initcall bpf_link_iter_init+0x0/0x20 returned 0 after 0 usecs calling init_trampolines+0x0/0x50 @ 1 initcall init_trampolines+0x0/0x50 returned 0 after 0 usecs calling bpf_offload_init+0x0/0x1c @ 1 initcall bpf_offload_init+0x0/0x1c returned 0 after 0 usecs calling bpf_cgroup_iter_init+0x0/0x20 @ 1 initcall bpf_cgroup_iter_init+0x0/0x20 returned 0 after 0 usecs calling cpumask_kfunc_init+0x0/0x90 @ 1 initcall cpumask_kfunc_init+0x0/0x90 returned 0 after 16 usecs calling load_system_certificate_list+0x0/0x2c @ 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: d65226f94206f230ae6de3313a822e1d824432e8' initcall load_system_certificate_list+0x0/0x2c returned 0 after 18117 usecs calling fault_around_debugfs+0x0/0x24 @ 1 initcall fault_around_debugfs+0x0/0x24 returned 0 after 1 usecs calling max_swapfiles_check+0x0/0xc @ 1 initcall max_swapfiles_check+0x0/0xc returned 0 after 0 usecs calling init_zswap+0x0/0x340 @ 1 zswap: loaded using pool lzo/zbud initcall init_zswap+0x0/0x340 returned 0 after 5540 usecs calling slab_sysfs_init+0x0/0xf0 @ 1 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 974 usecs calling split_huge_pages_debugfs+0x0/0x24 @ 1 initcall split_huge_pages_debugfs+0x0/0x24 returned 0 after 0 usecs calling pageowner_init+0x0/0x40 @ 1 page_owner is disabled initcall pageowner_init+0x0/0x40 returned 0 after 4193 usecs calling check_early_ioremap_leak+0x0/0x6c @ 1 initcall check_early_ioremap_leak+0x0/0x6c returned 0 after 0 usecs calling set_hardened_usercopy+0x0/0x2c @ 1 initcall set_hardened_usercopy+0x0/0x2c returned 1 after 0 usecs calling fscrypt_init+0x0/0xa0 @ 1 Key type .fscrypt registered Key type fscrypt-provisioning registered initcall fscrypt_init+0x0/0xa0 returned 0 after 10677 usecs calling pstore_init+0x0/0xa0 @ 1 initcall pstore_init+0x0/0xa0 returned 0 after 2 usecs calling init_root_keyring+0x0/0x14 @ 1 initcall init_root_keyring+0x0/0x14 returned 0 after 4 usecs calling init_profile_hash+0x0/0x84 @ 1 AppArmor: AppArmor sha1 policy hashing enabled initcall init_profile_hash+0x0/0x84 returned 0 after 6263 usecs calling integrity_fs_init+0x0/0x5c @ 1 initcall integrity_fs_init+0x0/0x5c returned 0 after 1 usecs calling crypto_algapi_init+0x0/0x14 @ 1 initcall crypto_algapi_init+0x0/0x14 returned 0 after 1 usecs calling fail_make_request_debugfs+0x0/0x28 @ 1 initcall fail_make_request_debugfs+0x0/0x28 returned 0 after 8 usecs calling blk_timeout_init+0x0/0x1c @ 1 initcall blk_timeout_init+0x0/0x1c returned 0 after 0 usecs calling init_error_injection+0x0/0x70 @ 1 initcall init_error_injection+0x0/0x70 returned 0 after 53 usecs calling pci_resource_alignment_sysfs_init+0x0/0x1c @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x1c returned 0 after 1 usecs calling pci_sysfs_init+0x0/0x80 @ 1 initcall pci_sysfs_init+0x0/0x80 returned 0 after 17 usecs calling bert_init+0x0/0x294 @ 1 initcall bert_init+0x0/0x294 returned 0 after 0 usecs calling clk_debug_init+0x0/0xe0 @ 1 initcall clk_debug_init+0x0/0xe0 returned 0 after 3 usecs calling sync_state_resume_initcall+0x0/0x14 @ 1 initcall sync_state_resume_initcall+0x0/0x14 returned 0 after 0 usecs calling deferred_probe_initcall+0x0/0x84 @ 1 initcall deferred_probe_initcall+0x0/0x84 returned 0 after 170 usecs calling firmware_memmap_init+0x0/0x44 @ 1 initcall firmware_memmap_init+0x0/0x44 returned 0 after 25 usecs calling register_update_efi_random_seed+0x0/0x28 @ 1 initcall register_update_efi_random_seed+0x0/0x28 returned 0 after 0 usecs calling efi_shutdown_init+0x0/0x50 @ 1 initcall efi_shutdown_init+0x0/0x50 returned -19 after 0 usecs calling efi_earlycon_unmap_fb+0x0/0x48 @ 1 initcall efi_earlycon_unmap_fb+0x0/0x48 returned 0 after 0 usecs calling xdp_metadata_init+0x0/0x20 @ 1 initcall xdp_metadata_init+0x0/0x20 returned 0 after 0 usecs calling bpf_sockmap_iter_init+0x0/0x20 @ 1 initcall bpf_sockmap_iter_init+0x0/0x20 returned 0 after 0 usecs calling bpf_sk_storage_map_iter_init+0x0/0x20 @ 1 initcall bpf_sk_storage_map_iter_init+0x0/0x20 returned 0 after 0 usecs calling bpf_prog_test_run_init+0x0/0xa0 @ 1 initcall bpf_prog_test_run_init+0x0/0xa0 returned 0 after 0 usecs calling tcp_congestion_default+0x0/0x20 @ 1 initcall tcp_congestion_default+0x0/0x20 returned 0 after 1 usecs calling ip_auto_config+0x0/0x6c4 @ 1 e1000e 0000:00:1f.6 eth0: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx e1000e 0000:00:1f.6 eth0: 10/100 speed: disabling TSO IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests ., BUG: unable to handle page fault for address: f6ffe000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page *pdpt = 00000000023fe001 *pde = 0000000002564067 *pte = 0000000000000000 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 75 Comm: kworker/4:1 Not tainted 6.3.0-rc1-00013-g6e4da4eee625 #1 Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 Workqueue: mld mld_ifc_work EIP: csum_partial+0xb9/0x120 Code: 13 46 88 13 46 8c 13 46 90 13 46 94 13 46 98 13 46 9c 13 46 a0 13 46 a4 13 46 a8 13 46 ac 13 46 b0 13 46 b4 13 46 b8 13 46 bc <13> 46 c0 13 46 c4 13 46 c8 13 46 cc 13 46 d0 13 46 d4 13 46 d8 13 EAX: c4dc9b41 EBX: c1a3dc99 ECX: 01231df8 EDX: c53f9c00 ESI: f6ffe040 EDI: c34f4010 EBP: c3351f04 ESP: c3351e88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010297 CR0: 80050033 CR2: f6ffe000 CR3: 02402000 CR4: 003506f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: ? mld_sendpack+0x12c/0x310 ? add_grec+0x420/0x46c ? __switch_to_asm+0x83/0xf0 ? mld_send_cr+0x107/0x298 mld_send_cr+0x144/0x298 ? __cond_resched+0x18/0x54 mld_ifc_work+0x27/0x15c process_one_work+0x18a/0x36c worker_thread+0x16a/0x3d4 kthread+0xd1/0xec ? process_one_work+0x36c/0x36c ? kthread_complete_and_exit+0x1c/0x1c ret_from_fork+0x19/0x24 Modules linked in: CR2: 00000000f6ffe000 ---[ end trace 0000000000000000 ]--- EIP: csum_partial+0xb9/0x120 Code: 13 46 88 13 46 8c 13 46 90 13 46 94 13 46 98 13 46 9c 13 46 a0 13 46 a4 13 46 a8 13 46 ac 13 46 b0 13 46 b4 13 46 b8 13 46 bc <13> 46 c0 13 46 c4 13 46 c8 13 46 cc 13 46 d0 13 46 d4 13 46 d8 13 EAX: c4dc9b41 EBX: c1a3dc99 ECX: 01231df8 EDX: c53f9c00 ESI: f6ffe040 EDI: c34f4010 EBP: c3351f04 ESP: c3351e88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010297 CR0: 80050033 CR2: f6ffe000 CR3: 02402000 CR4: 003506f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled