linux-kernel - [PATCH v3 3/9] wifi: rtw88: mac: Support SDIO specific bits in the power on sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Mar 2023 22:35:02 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     linux-wireless@...r.kernel.org
Cc:     Yan-Hsuan Chuang <tony0620emma@...il.com>,
        Kalle Valo <kvalo@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        linux-mmc@...r.kernel.org, Chris Morgan <macroalpha82@...il.com>,
        Nitin Gupta <nitin.gupta981@...il.com>,
        Neo Jou <neojou@...il.com>, Pkshih <pkshih@...ltek.com>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Larry Finger <Larry.Finger@...inger.net>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v3 3/9] wifi: rtw88: mac: Support SDIO specific bits in the power on sequence

Add the code specific to SDIO HCI in the MAC power on sequence. This is
based on the RTL8822BS and RTL8822CS vendor drivers.

Co-developed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@...il.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
- add sdio.h include in patch 2 already (instead of patch 3) as
  suggested by Larry Finger (thank you!) so the build doesn't break
  during bisect
- only set RTW_FLAG_POWERON when applying the power on sequence was
  successful (thanks for the suggestion Ping-Ke!)
- fix smatch false positive "uninitialized symbol 'imr'" in
  rtw_mac_power_switch() by initializing imr to 0. Thanks for spotting
  this and for the suggestion Ping-Ke!

Changes since v1:
- only access REG_SDIO_HIMR for RTW_HCI_TYPE_SDIO
- use proper BIT_HCI_SUS_REQ, BIT_HCI_RESUME_RDY and BIT_SDIO_PAD_E5
  macros as suggested by Ping-Ke


 drivers/net/wireless/realtek/rtw88/mac.c | 47 +++++++++++++++++++++---
 1 file changed, 42 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index 2fcba43a6f72..44e07b61b9b9 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -61,6 +61,7 @@ EXPORT_SYMBOL(rtw_set_channel_mac);
 
 static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
 {
+	unsigned int retry;
 	u32 value32;
 	u8 value8;
 
@@ -78,6 +79,28 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
 	case RTW_HCI_TYPE_PCIE:
 		rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_USB_SUS_DIS);
 		break;
+	case RTW_HCI_TYPE_SDIO:
+		rtw_write8_clr(rtwdev, REG_SDIO_HSUS_CTRL, BIT_HCI_SUS_REQ);
+
+		for (retry = 0; retry < RTW_PWR_POLLING_CNT; retry++) {
+			if (rtw_read8(rtwdev, REG_SDIO_HSUS_CTRL) & BIT_HCI_RESUME_RDY)
+				break;
+
+			usleep_range(10, 50);
+		}
+
+		if (retry == RTW_PWR_POLLING_CNT) {
+			rtw_err(rtwdev, "failed to poll REG_SDIO_HSUS_CTRL[1]");
+			return -ETIMEDOUT;
+		}
+
+		if (rtw_sdio_is_sdio30_supported(rtwdev))
+			rtw_write8_set(rtwdev, REG_HCI_OPT_CTRL + 2,
+				       BIT_SDIO_PAD_E5 >> 16);
+		else
+			rtw_write8_clr(rtwdev, REG_HCI_OPT_CTRL + 2,
+				       BIT_SDIO_PAD_E5 >> 16);
+		break;
 	case RTW_HCI_TYPE_USB:
 		break;
 	default:
@@ -249,6 +272,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
 {
 	const struct rtw_chip_info *chip = rtwdev->chip;
 	const struct rtw_pwr_seq_cmd **pwr_seq;
+	u32 imr = 0;
 	u8 rpwm;
 	bool cur_pwr;
 	int ret;
@@ -274,18 +298,24 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on)
 	if (pwr_on == cur_pwr)
 		return -EALREADY;
 
+	if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) {
+		imr = rtw_read32(rtwdev, REG_SDIO_HIMR);
+		rtw_write32(rtwdev, REG_SDIO_HIMR, 0);
+	}
+
 	if (!pwr_on)
 		clear_bit(RTW_FLAG_POWERON, rtwdev->flags);
 
 	pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq;
 	ret = rtw_pwr_seq_parser(rtwdev, pwr_seq);
-	if (ret)
-		return ret;
 
-	if (pwr_on)
+	if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO)
+		rtw_write32(rtwdev, REG_SDIO_HIMR, imr);
+
+	if (!ret && pwr_on)
 		set_bit(RTW_FLAG_POWERON, rtwdev->flags);
 
-	return 0;
+	return ret;
 }
 
 static int __rtw_mac_init_system_cfg(struct rtw_dev *rtwdev)
@@ -456,6 +486,9 @@ static void download_firmware_reg_backup(struct rtw_dev *rtwdev,
 	rtw_write16(rtwdev, REG_FIFOPAGE_INFO_1, 0x200);
 	rtw_write32(rtwdev, REG_RQPN_CTRL_2, bckp[bckp_idx - 1].val);
 
+	if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO)
+		rtw_read32(rtwdev, REG_SDIO_FREE_TXPG);
+
 	/* Disable beacon related functions */
 	tmp = rtw_read8(rtwdev, REG_BCN_CTRL);
 	bckp[bckp_idx].len = 1;
@@ -1068,8 +1101,12 @@ static int txdma_queue_mapping(struct rtw_dev *rtwdev)
 	if (rtw_chip_wcpu_11ac(rtwdev))
 		rtw_write32(rtwdev, REG_H2CQ_CSR, BIT_H2CQ_FULL);
 
-	if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB)
+	if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) {
+		rtw_read32(rtwdev, REG_SDIO_FREE_TXPG);
+		rtw_write32(rtwdev, REG_SDIO_TX_CTRL, 0);
+	} else if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB) {
 		rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_ARBBW_EN);
+	}
 
 	return 0;
 }
-- 
2.40.0