lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <PH0PR11MB58806032CE88C9E6BE61059CDA809@PH0PR11MB5880.namprd11.prod.outlook.com>
Date:   Mon, 20 Mar 2023 23:05:17 +0000
From:   "Zhang, Qiang1" <qiang1.zhang@...el.com>
To:     "paulmck@...nel.org" <paulmck@...nel.org>
CC:     "frederic@...nel.org" <frederic@...nel.org>,
        "joel@...lfernandes.org" <joel@...lfernandes.org>,
        "rcu@...r.kernel.org" <rcu@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] rcutorture: Convert schedule_timeout_uninterruptible()
 to mdelay() in rcu_torture_stall()

> For kernels built with enable PREEMPT_NONE and CONFIG_DEBUG_ATOMIC_SLEEP,
> running the RCU stall tests.
> 
> runqemu kvm slirp nographic qemuparams="-m 1024 -smp 4"
> bootparams="nokaslr console=ttyS0 rcutorture.stall_cpu=30
> rcutorture.stall_no_softlockup=1 rcutorture.stall_cpu_irqsoff=1
> rcutorture.stall_cpu_block=1" -d
> 
> [   10.841071] rcu-torture: rcu_torture_stall begin CPU stall
> [   10.841073] rcu_torture_stall start on CPU 3.
> [   10.841077] BUG: scheduling while atomic: rcu_torture_sta/66/0x0000000
> ....
> [   10.841108] Call Trace:
> [   10.841110]  <TASK>
> [   10.841112]  dump_stack_lvl+0x64/0xb0
> [   10.841118]  dump_stack+0x10/0x20
> [   10.841121]  __schedule_bug+0x8b/0xb0
> [   10.841126]  __schedule+0x2172/0x2940
> [   10.841157]  schedule+0x9b/0x150
> [   10.841160]  schedule_timeout+0x2e8/0x4f0
> [   10.841192]  schedule_timeout_uninterruptible+0x47/0x50
> [   10.841195]  rcu_torture_stall+0x2e8/0x300
> [   10.841199]  kthread+0x175/0x1a0
> [   10.841206]  ret_from_fork+0x2c/0x50
> 
> The above calltrace occurs in the local_irq_disable/enable() critical
> section call schedule_timeout(), and invoke schedule_timeout() also
> implies a quiescent state, of course it also fails to trigger RCU stall,
> this commit therefore use mdelay() instead of schedule_timeout() to
> trigger RCU stall.
> 
> Suggested-by: Joel Fernandes <joel@...lfernandes.org>
> Signed-off-by: Zqiang <qiang1.zhang@...el.com>
> ---
>  kernel/rcu/rcutorture.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
> index d06c2da04c34..a08a72bef5f1 100644
> --- a/kernel/rcu/rcutorture.c
> +++ b/kernel/rcu/rcutorture.c
> @@ -2472,7 +2472,7 @@ static int rcu_torture_stall(void *args)
>
>Right here there is:
>
>			if (stall_cpu_block) {
>
>In other words, the rcutorture.stall_cpu_block module parameter says to
>block, even if it is a bad thing to do.  The point of this is to verify
>the error messages that are supposed to be printed on the console when
>this happens.
>
>  #ifdef CONFIG_PREEMPTION
>  				preempt_schedule();
>  #else
> -				schedule_timeout_uninterruptible(HZ);
> +				mdelay(jiffies_to_msecs(HZ));
>
>So this really needs to stay schedule_timeout_uninterruptible(HZ).

But invoke schedule_timeout_uninterruptible(HZ) implies a quiescent state, 
this will not cause an RCU stall to occur, and still in the RCU read critical section(PREEMPT_COUNT=y).

It didn't happen RCU stall when I tested with the following parameters for 
rcutorture.stall_cpu=30
rcutorture.stall_no_softlockup=1
rcutorture.stall_cpu_irqsoff=1
rcutorture.stall_cpu_block=1


Thanks
Zqiang

>
>So should there be a change to kernel-parameters.txt to make it
>more clear that this is intended behavior?
>
>						Thanx, Paul
>
>  #endif
>  			} else if (stall_no_softlockup) {
>  				touch_softlockup_watchdog();
> -- 
> 2.25.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ