| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Mar 2023 21:48:21 +0800
From: yangxingui <yangxingui@...wei.com>
To: John Garry <john.g.garry@...cle.com>, <jejb@...ux.ibm.com>,
<martin.petersen@...cle.com>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxarm@...wei.com>, <prime.zeng@...ilicon.com>,
<kangfenglong@...wei.com>, <chenxiang66@...ilicon.com>
Subject: Re: [PATCH RESEND] scsi: libsas: Add end eh callback
Hi John,
On 2023/3/21 17:31, John Garry wrote:
> On 21/03/2023 07:39, Xingui Yang wrote:
>> If an error occurs while the disk is processing an NCQ command and the
>> host
>> received the abnormal SDB FIS, let libata EH to analyze the NCQ error,
>> and
>> it is not necessary to reset the target to recover.
>>
>> Then the hisi_sas has some special process to set dev_status to normal
>> when
>> end the eh for NCQ error without reset the target, so add a callback and
>> fill it in for the hisi_sas driver.
>
> What is so special about this driver such that it is the only one to get
> this treatment? We generally don't just add callbacks for specific
> driver usage, i.e. you need to make it generic.
Yes, I agree very much. it may be a common requirement for the lldd
performs a specific state restoration after eh complete. such as, we set
the device state to normal instead of doing it in the target reset
function.
>
> I would need to refresh my memory on the ATA EH handling to review this
> further, which I will do when I get a chance.
Thanks
Xingui
>
>>
>> Signed-off-by: Xingui Yang <yangxingui@...wei.com>
>> ---
>> drivers/scsi/hisi_sas/hisi_sas_main.c | 12 +++++++++---
>> drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 7 +++++--
>> drivers/scsi/libsas/sas_ata.c | 5 +++++
>> include/scsi/libsas.h | 2 ++
>> 4 files changed, 21 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c
>> b/drivers/scsi/hisi_sas/hisi_sas_main.c
>> index 325d6d6a21c3..61686ead0027 100644
>> --- a/drivers/scsi/hisi_sas/hisi_sas_main.c
>> +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
>> @@ -1777,9 +1777,6 @@ static int hisi_sas_I_T_nexus_reset(struct
>> domain_device *device)
>> struct device *dev = hisi_hba->dev;
>> int rc;
>> - if (sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR)
>> - sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
>> -
>> rc = hisi_sas_internal_task_abort_dev(sas_dev, false);
>> if (rc < 0) {
>> dev_err(dev, "I_T nexus reset: internal abort (%d)\n", rc);
>> @@ -1967,6 +1964,14 @@ static bool
>> hisi_sas_internal_abort_timeout(struct sas_task *task,
>> return false;
>> }
>> +static void hisi_sas_end_eh(struct domain_device *dev)
>> +{
>> + struct hisi_sas_device *sas_dev = dev->lldd_dev;
>> +
>> + if (sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR)
>> + sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
>> +}
>> +
>> static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
>> {
>> hisi_sas_port_notify_formed(sas_phy);
>> @@ -2083,6 +2088,7 @@ static struct sas_domain_function_template
>> hisi_sas_transport_ops = {
>> .lldd_write_gpio = hisi_sas_write_gpio,
>> .lldd_tmf_aborted = hisi_sas_tmf_aborted,
>> .lldd_abort_timeout = hisi_sas_internal_abort_timeout,
>> + .lldd_end_eh = hisi_sas_end_eh,
>> };
>> void hisi_sas_init_mem(struct hisi_hba *hisi_hba)
>> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
>> b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
>> index 66fcb340b98e..abad57de4aee 100644
>> --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
>> +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
>> @@ -2433,15 +2433,18 @@ static int complete_v3_hw(struct hisi_sas_cq *cq)
>> struct hisi_sas_device *sas_dev =
>> &hisi_hba->devices[device_id];
>> struct domain_device *device = sas_dev->sas_device;
>> + bool force_reset = true;
>> dev_err(dev, "erroneous completion disk err dev id=%d
>> sas_addr=0x%llx CQ hdr: 0x%x 0x%x 0x%x 0x%x\n",
>> device_id, itct->sas_addr, dw0, dw1,
>> complete_hdr->act, dw3);
>> - if (is_ncq_err_v3_hw(complete_hdr))
>> + if (is_ncq_err_v3_hw(complete_hdr)) {
>> sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR;
>> + force_reset = false;
>> + }
>> - sas_ata_device_link_abort(device, true);
>> + sas_ata_device_link_abort(device, force_reset);
>> } else if (likely(iptt < HISI_SAS_COMMAND_ENTRIES_V3_HW)) {
>> slot = &hisi_hba->slot_info[iptt];
>> slot->cmplt_queue_slot = rd_point;
>> diff --git a/drivers/scsi/libsas/sas_ata.c
>> b/drivers/scsi/libsas/sas_ata.c
>> index 77714a495cbb..25a064087311 100644
>> --- a/drivers/scsi/libsas/sas_ata.c
>> +++ b/drivers/scsi/libsas/sas_ata.c
>> @@ -534,11 +534,16 @@ void sas_ata_end_eh(struct ata_port *ap)
>> {
>> struct domain_device *dev = ap->private_data;
>> struct sas_ha_struct *ha = dev->port->ha;
>> + struct sas_internal *i = dev_to_sas_internal(dev);
>> unsigned long flags;
>> spin_lock_irqsave(&ha->lock, flags);
>> if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state))
>> ha->eh_active--;
>> +
>> + if (i->dft->lldd_end_eh)
>> + i->dft->lldd_end_eh(dev);
>> +
>> spin_unlock_irqrestore(&ha->lock, flags);
>> }
>> diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
>> index 159823e0afbf..659395ef616e 100644
>> --- a/include/scsi/libsas.h
>> +++ b/include/scsi/libsas.h
>> @@ -683,6 +683,8 @@ struct sas_domain_function_template {
>> int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
>> int (*lldd_query_task)(struct sas_task *);
>> + void (*lldd_end_eh)(struct domain_device *dev);
>> +
>> /* Special TMF callbacks */
>> void (*lldd_tmf_exec_complete)(struct domain_device *dev);
>> void (*lldd_tmf_aborted)(struct sas_task *task);
>
>
> .
Powered by blists - more mailing lists