[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230322134654.219957-2-herve.codina@bootlin.com>
Date: Wed, 22 Mar 2023 14:46:49 +0100
From: Herve Codina <herve.codina@...tlin.com>
To: Herve Codina <herve.codina@...tlin.com>,
Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
alsa-devel@...a-project.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: [PATCH v3 1/6] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@...tlin.com>
---
.../bindings/mfd/lantiq,pef2256.yaml | 205 ++++++++++++++++++
1 file changed, 205 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..affbf20df0a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+ - Herve Codina <herve.codina@...tlin.com>
+
+description:
+ The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+ line interface component designed to fulfill all required interfacing between
+ an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+ compatible:
+ items:
+ - const: lantiq,pef2256
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Master clock
+ - description: Receive System Clock
+ - description: Transmit System Clock
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: sclkr
+ - const: sclkx
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO used to reset the device.
+ maxItems: 1
+
+ pinctrl:
+ $ref: /schemas/pinctrl/pinctrl.yaml#
+
+ patternProperties:
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+ properties:
+ pins:
+ enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+ function:
+ enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+ SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+ GPI, GPOH, GPOL ]
+
+ additionalProperties: false
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ lantiq,line-interface:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [e1, t1j1]
+ default: e1
+ description: |
+ The line interface type
+ - e1: E1 line
+ - t1j1: T1/J1 line
+
+ lantiq,frame-format:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The line interface frame format.
+
+ lantiq,data-rate-bps:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2048000, 4096000, 8192000, 16384000]
+ default: 2048000
+ description:
+ Data rate (bit per seconds) on the system highway.
+
+ lantiq,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data is sent on falling edge of the clock (and received on the rising
+ edge). If 'clock-falling-edge' is not present, data is sent on the
+ rising edge (and received on the falling edge).
+
+ lantiq,channel-phase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description:
+ The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
+ time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
+ rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+ bit/s, the data (all 32 8bit) present in the frame are interleave with
+ unused time-slots. The lantiq,channel-phase property allows to set the
+ correct alignment of the interleave mechanism.
+ For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+ lantiq,channel-phase = 2, the interleave schema with unused time-slots
+ (nu) and used time-slots (XX) for TSi is
+ nu nu XX nu nu nu XX nu nu nu XX nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+ interleave schema is
+ nu XX nu nu nu XX nu nu nu XX nu nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+ lantiq,channel-phase = 1, the interleave schema is
+ nu XX nu XX nu XX
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+ lantiq,subordinate:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present, the pef2256 works in subordinate mode. In this mode it
+ synchronizes on line interface clock signals. Otherwise, it synchronizes
+ on internal clocks.
+
+patternProperties:
+ '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
+ $ref: /schemas/sound/lantiq,pef2256-codec.yaml
+
+allOf:
+ - if:
+ properties:
+ lantiq,line-interface:
+ contains:
+ const: e1
+ then:
+ properties:
+ lantiq,frame-format:
+ enum: [doubleframe, crc4-multiframe, auto-multiframe]
+ default: doubleframe
+ description: |
+ The E1 line interface frame format
+ - doubleframe: Doubleframe format
+ - crc4-multiframe: CRC4 multiframe format
+ - auto-multiframe: CRC4 multiframe format with interworking
+ capabilities (ITU-T G.706 Annex B)
+
+ else:
+ # T1/J1 line
+ properties:
+ lantiq,frame-format:
+ enum: [4frame, 12frame, 24frame, 72frame]
+ default: 12frame
+ description: |
+ The T1/J1 line interface frame format
+ - 4frame: 4-frame multiframe format (F4)
+ - 12frame: 12-frame multiframe format (F12, D3/4)
+ - 24frame: 24-frame multiframe format (ESF)
+ - 72frame: 72-frame multiframe format (F72, remote switch mode)
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ framer@...0000 {
+ compatible = "lantiq,pef2256", "simple-mfd";
+ reg = <0x2000000 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&intc>;
+ clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+ clock-names = "mclk", "sclkr", "sclkx";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ lantiq,data-rate-bps = <4096000>;
+
+ pinctrl {
+ pef2256_rpa_sypr: rpa-pins {
+ pins = "RPA";
+ function = "SYPR";
+ };
+ pef2256_xpa_sypx: xpa-pins {
+ pins = "XPA";
+ function = "SYPX";
+ };
+ };
+
+ codec {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ };
+ };
--
2.39.2
Powered by blists - more mailing lists