| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0d6faa00-c630-c739-6a0a-c5cf858a04fa@arm.com>
Date: Thu, 23 Mar 2023 17:04:59 +0000
From: Suzuki K Poulose <suzuki.poulose@....com>
To: Tao Zhang <quic_taozha@...cinc.com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Konrad Dybcio <konradybcio@...il.com>,
Mike Leach <mike.leach@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Jinlong Mao <quic_jinlmao@...cinc.com>,
Leo Yan <leo.yan@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
coresight@...ts.linaro.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Tingwei Zhang <quic_tingweiz@...cinc.com>,
Yuanfang Zhang <quic_yuanfang@...cinc.com>,
Trilok Soni <quic_tsoni@...cinc.com>,
Hao Zhang <quic_hazha@...cinc.com>,
linux-arm-msm@...r.kernel.org, bjorn.andersson@...aro.org
Subject: Re: [PATCH v3 07/11] coresight-tpdm: Add nodes for dsb edge control
On 23/03/2023 06:04, Tao Zhang wrote:
> Add the nodes to set value for DSB edge control and DSB edge
> control mask. Each DSB subunit TPDM has maximum of n(n<16) EDCR
> resgisters to configure edge control. DSB edge detection control
> 00: Rising edge detection
> 01: Falling edge detection
> 10: Rising and falling edge detection (toggle detection) > And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to
> configure mask. Eight 32 bit registers providing DSB interface
> edge detection mask control.
>
> Signed-off-by: Tao Zhang <quic_taozha@...cinc.com>
> ---
> .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 26 ++++
> drivers/hwtracing/coresight/coresight-tpdm.c | 142 ++++++++++++++++++++-
> drivers/hwtracing/coresight/coresight-tpdm.h | 14 ++
> 3 files changed, 181 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> index f13e282..094d624 100644
> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
> @@ -45,3 +45,29 @@ Description:
> tpdm.
>
> Accepts the value needs to be greater than 0.
> +
> +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl
> +Date: March 2023
> +KernelVersion 6.3
> +Contact: Jinlong Mao (QUIC) <quic_jinlmao@...cinc.com>, Tao Zhang (QUIC) <quic_taozha@...cinc.com>
> +Description:
> + (Write) Set the edge control of DSB tpdm. Read the
> + edge control of DSB tpdm.
Could we not say :
Read / Write a set of the edge control registers of the DSB in
TPDM
> +
> + Accepts the following three values.
This is a bit confusing, at least to me. This could either mean,
a single write of values 1-3 are accepted.
> + value 1: Start EDCR register number
> + value 2: End EDCR register number
> + value 3: The value need to be written
But you really mean to say, the writes must be of the following format
<integer1> <integer2> <integer3>
where :
<integer1> : Start EDCR ...
....
> +
> +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl_mask
> +Date: March 2023
> +KernelVersion 6.3
> +Contact: Jinlong Mao (QUIC) <quic_jinlmao@...cinc.com>, Tao Zhang (QUIC) <quic_taozha@...cinc.com>
> +Description:
> + (Write) Set the edge control mask of DSB tpdm. Read
> + the edge control mask of DSB tpdm.
> +
> + Accepts the following three values.
> + value 1: Start EDCMR register number
> + value 2: End EDCMR register number
> + value 3: The value need to be written
Similarly here.
> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c
> index 8cd822f..2a0b36c 100644
> --- a/drivers/hwtracing/coresight/coresight-tpdm.c
> +++ b/drivers/hwtracing/coresight/coresight-tpdm.c
> @@ -88,7 +88,14 @@ static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val)
>
> static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata)
> {
> - u32 val;
> + u32 val, i;
> +
> + for (i = 0; i < TPDM_DSB_MAX_EDCR; i++)
> + writel_relaxed(drvdata->dsb->edge_ctrl[i],
> + drvdata->base + TPDM_DSB_EDCR(i));
> + for (i = 0; i < TPDM_DSB_MAX_EDCMR; i++)
> + writel_relaxed(drvdata->dsb->edge_ctrl_mask[i],
> + drvdata->base + TPDM_DSB_EDCMR(i));
>
> val = readl_relaxed(drvdata->base + TPDM_DSB_TIER);
> /* Set trigger timestamp */
> @@ -311,6 +318,137 @@ static ssize_t dsb_mode_store(struct device *dev,
> }
> static DEVICE_ATTR_RW(dsb_mode);
>
> +static ssize_t dsb_edge_ctrl_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
> + ssize_t size = 0;
> + int i;
> +
> + spin_lock(&drvdata->spinlock);
> + for (i = 0; i < TPDM_DSB_MAX_EDCR; i++) {
> + size += sysfs_emit_at(buf, size,
> + "Index:0x%x Val:0x%x\n", i,
> + drvdata->dsb->edge_ctrl[i]);
> + }
> + spin_unlock(&drvdata->spinlock);
> + return size;
> +}
> +
> +/*
> + * value 1: Start EDCR register number
> + * value 2: End EDCR register number
> + * value 3: The value need to be written
> + * The EDCR registers can include up to 16 32-bit registers, and each
> + * one can be configured to control up to 16 edge detections(2 bits
> + * control one edge detection). So a total 256 edge detections can be
> + * configured. So the starting number(value 1) and ending number(value 2)
> + * cannot be greater than 256, and value 1 should be less than value 2.
> + * The following values are the rage of value 3.
> + * 0 - Rising edge detection
> + * 1 - Falling edge detection
> + * 2 - Rising and falling edge detection (toggle detection)
> + */
> +static ssize_t dsb_edge_ctrl_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t size)
> +{
> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
> + unsigned long start, end, edge_ctrl;
> + uint32_t val;
> + int i, index, bit, reg;
> +
> + if (sscanf(buf, "%lx %lx %lx", &start, &end, &edge_ctrl) != 3)
> + return -EINVAL;
> + if ((start >= TPDM_DSB_MAX_LINES) || (end >= TPDM_DSB_MAX_LINES) ||
> + edge_ctrl > 0x2)
> + return -EPERM;
Isn't it an error to provide start > end ?
> +
> + spin_lock(&drvdata->spinlock);
> + for (i = start; i <= end; i++) {
> + /*
> + * The 32-bit register has 32 bits(NUM_OF_BITS).
> + * Each one register can be configured to control 16
> + * (NUM_OF_BITS / 2) edge detectioins.
> + */
/*
* Each DSB Edge control line requires 2bits.
* Thus we have 16 lines in a 32bit word.
*/
Could we please define something like:
#define EDCRS_PER_WORD 16
#define EDCR_TO_WORD_IDX(r) ((r) / EDCRS_PER_WORD)
#define EDCR_TO_WORD_SHIFT(r) ((r) % EDCRS_PER_WORD)
#define EDCR_TO_WORD_MASK(r) (0x3 << EDCR_TO_WORD_SHIFT((r)))
> + reg = i / (NUM_OF_BITS / 2);
> + index = i % (NUM_OF_BITS / 2);
> + bit = index * 2;
> +
reg = EDCR_TO_WORD_IDX(i);
mask = EDCR_TO_WORD_MASK(i);
val &= ~mask;
val |= FIELD_PREP(mask, edge_ctrl);
> + val = drvdata->dsb->edge_ctrl[reg];
> + val &= ~GENMASK((bit + 1), bit);
> + val |= (edge_ctrl << bit);
> + drvdata->dsb->edge_ctrl[reg] = val;
> + }
> + spin_unlock(&drvdata->spinlock);
> +
> + return size;
> +}
> +static DEVICE_ATTR_RW(dsb_edge_ctrl);
> +
> +static ssize_t dsb_edge_ctrl_mask_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
> + ssize_t size = 0;
> + int i;
> +
> + spin_lock(&drvdata->spinlock);
> + for (i = 0; i < TPDM_DSB_MAX_EDCR / 2; i++) {
Why is this not `i < TPDM_DSB_MAX_EDCMR` ?
> + size += sysfs_emit_at(buf, size,
> + "Index:0x%x Val:0x%x\n", i,
> + drvdata->dsb->edge_ctrl_mask[i]);
> + }
> + spin_unlock(&drvdata->spinlock);
> + return size;
> +}
> +
> +/*
> + * value 1: Start EDCMR register number
> + * value 2: End EDCMR register number
> + * value 3: The value need to be written
> + */
> +static ssize_t dsb_edge_ctrl_mask_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t size)
> +{
> + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
> + unsigned long start, end, val;
> + u32 set;
> + int i, index, reg;
> +
> + if (sscanf(buf, "%lx %lx %lx", &start, &end, &val) != 3)
> + return -EINVAL;
> + if ((start >= TPDM_DSB_MAX_LINES) || (end >= TPDM_DSB_MAX_LINES)
> + || (val & ~1UL))
> + return -EPERM;
> +
> + spin_lock(&drvdata->spinlock);
> + for (i = start; i <= end; i++) {
> + /*
> + * The 32-bit register has 32 bits(NUM_OF_BITS).
> + * Each one register can be configured to control 32
> + * (NUM_OF_BITS) edge detectioin masks.
minor nit: detection.
You could simply say:
/*
* There is 1 bit per DSB Edge Control line.
* Thus we have 32 lines in a 32bit word.
*/
reg = i / 32;
> + reg = i / NUM_OF_BITS;
> + index = (i % NUM_OF_BITS);
> +
> + set = drvdata->dsb->edge_ctrl_mask[reg];
> + if (val)
> + set |= BIT(index);
> + else
> + set &= ~BIT(index);
> + drvdata->dsb->edge_ctrl_mask[reg] = set;
> + }
> + spin_unlock(&drvdata->spinlock);
> + return size;
> +}
> +static DEVICE_ATTR_RW(dsb_edge_ctrl_mask);
> +
> static ssize_t dsb_trig_type_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> @@ -383,6 +521,8 @@ static DEVICE_ATTR_RW(dsb_trig_ts);
>
> static struct attribute *tpdm_dsb_attrs[] = {
> &dev_attr_dsb_mode.attr,
> + &dev_attr_dsb_edge_ctrl.attr,
> + &dev_attr_dsb_edge_ctrl_mask.attr,
> &dev_attr_dsb_trig_ts.attr,
> &dev_attr_dsb_trig_type.attr,
> NULL,
> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h
> index 8fee562..342ef23 100644
> --- a/drivers/hwtracing/coresight/coresight-tpdm.h
> +++ b/drivers/hwtracing/coresight/coresight-tpdm.h
> @@ -12,6 +12,8 @@
> /* DSB Subunit Registers */
> #define TPDM_DSB_CR (0x780)
> #define TPDM_DSB_TIER (0x784)
> +#define TPDM_DSB_EDCR(n) (0x808 + (n * 4))
> +#define TPDM_DSB_EDCMR(n) (0x848 + (n * 4))
>
> /* Enable bit for DSB subunit */
> #define TPDM_DSB_CR_ENA BIT(0)
> @@ -31,6 +33,8 @@
> #define TPDM_DSB_TEST_MODE GENMASK(11, 9)
> #define TPDM_DSB_HPSEL GENMASK(6, 2)
>
> +#define NUM_OF_BITS 32
Please don't use such generic names. Instead define TPDM specific
helper definitions. See above.
Suzuki
> +
> /* TPDM integration test registers */
> #define TPDM_ITATBCNTRL (0xEF0)
> #define TPDM_ITCNTRL (0xF00)
> @@ -57,14 +61,24 @@
> #define TPDM_PIDR0_DS_IMPDEF BIT(0)
> #define TPDM_PIDR0_DS_DSB BIT(1)
>
> +#define TPDM_DSB_MAX_LINES 256
> +/* MAX number of EDCR registers */
> +#define TPDM_DSB_MAX_EDCR 16 > +/* MAX number of EDCMR registers */
> +#define TPDM_DSB_MAX_EDCMR 8
> +
> /**
> * struct dsb_dataset - specifics associated to dsb dataset
> * @mode: DSB programming mode
> + * @edge_ctrl: Save value for edge control
> + * @edge_ctrl_mask: Save value for edge control mask
> * @trig_ts: Enable/Disable trigger timestamp.
> * @trig_type: Enable/Disable trigger type.
> */
> struct dsb_dataset {
> u32 mode;
> + u32 edge_ctrl[TPDM_DSB_MAX_EDCR];
> + u32 edge_ctrl_mask[TPDM_DSB_MAX_EDCMR];
> bool trig_ts;
> bool trig_type;
> };
Powered by blists - more mailing lists