[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230323172113.1231050-2-xiang.ye@intel.com>
Date: Fri, 24 Mar 2023 01:21:08 +0800
From: Ye Xiang <xiang.ye@...el.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>,
Matthias Kaehlcke <mka@...omium.org>,
Lee Jones <lee@...nel.org>, Wolfram Sang <wsa@...nel.org>,
Tyrone Ting <kfting@...oton.com>,
Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, linux-usb@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-spi@...r.kernel.org, linux-gpio@...r.kernel.org
Cc: srinivas.pandruvada@...el.com, heikki.krogerus@...ux.intel.com,
andriy.shevchenko@...ux.intel.com, sakari.ailus@...ux.intel.com,
zhifeng.wang@...el.com, wentong.wu@...el.com, lixu.zhang@...el.com,
Ye Xiang <xiang.ye@...el.com>
Subject: [PATCH v6 1/6] usb: Add support for Intel LJCA device
This patch implements the USB part of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA).
The communication between the various LJCA module drivers and the
hardware will be muxed/demuxed by this driver. Three modules (
I2C, GPIO, and SPI) are supported currently.
Each sub-module of LJCA device is identified by type field within
the LJCA message header.
The minimum code in ASL that covers this board is
Scope (\_SB.PCI0.DWC3.RHUB.HS01)
{
Device (GPIO)
{
Name (_ADR, Zero)
Name (_STA, 0x0F)
}
Device (I2C)
{
Name (_ADR, One)
Name (_STA, 0x0F)
}
Device (SPI)
{
Name (_ADR, 0x02)
Name (_STA, 0x0F)
}
}
Signed-off-by: Ye Xiang <xiang.ye@...el.com>
---
drivers/usb/misc/Kconfig | 13 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/ljca.c | 965 ++++++++++++++++++++++++++++++++++++++
include/linux/usb/ljca.h | 29 ++
4 files changed, 1008 insertions(+)
create mode 100644 drivers/usb/misc/ljca.c
create mode 100644 include/linux/usb/ljca.h
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a5f7652db7da..74ee39d02e69 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -273,6 +273,19 @@ config USB_LINK_LAYER_TEST
Layer Test Device. Say Y only when you want to conduct USB Super Speed
Link Layer Test for host controllers.
+config USB_LJCA
+ tristate "Intel La Jolla Cove Adapter support"
+ select AUXILIARY_BUS
+ depends on USB
+ help
+ This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO
+ Master Adapter (LJCA). Additional drivers such as I2C_LJCA,
+ GPIO_LJCA and SPI_LJCA must be enabled in order to use the
+ functionality of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ljca.
+
config USB_CHAOSKEY
tristate "ChaosKey random number generator driver support"
depends on HW_RANDOM
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 93581baec3a8..6f6adfbe17e0 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o
obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o
obj-$(CONFIG_USB_HSIC_USB4604) += usb4604.o
obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o
+obj-$(CONFIG_USB_LJCA) += ljca.o
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o
diff --git a/drivers/usb/misc/ljca.c b/drivers/usb/misc/ljca.c
new file mode 100644
index 000000000000..3e4f85f453dd
--- /dev/null
+++ b/drivers/usb/misc/ljca.c
@@ -0,0 +1,965 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel La Jolla Cove Adapter USB driver
+ *
+ * Copyright (c) 2023, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/dev_printk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/ljca.h>
+
+enum ljca_acpi_match_adr {
+ LJCA_ACPI_MATCH_GPIO,
+ LJCA_ACPI_MATCH_I2C1,
+ LJCA_ACPI_MATCH_I2C2,
+ LJCA_ACPI_MATCH_SPI1,
+ LJCA_ACPI_MATCH_SPI2,
+ LJCA_ACPI_MATCH_MAX,
+};
+
+struct ljca_msg {
+ u8 type;
+ u8 cmd;
+ u8 flags;
+ u8 len;
+ u8 data[];
+} __packed;
+
+struct fw_version {
+ u8 major;
+ u8 minor;
+ __le16 patch;
+ __le16 build;
+} __packed;
+
+/**
+ * enum ljca_stub_type - Stub type supported by LJCA.
+ * @LJCA_MNG_STUB: Provides Management messages.
+ * @LJCA_DIAG_STUB: provides Diagnose messages.
+ * @LJCA_GPIO_STUB: provides GPIO functionality.
+ * @LJCA_I2C_STUB: provides I2C functionality.
+ * @LJCA_SPI_STUB: provides SPI functionality.
+ */
+enum ljca_stub_type {
+ LJCA_MNG_STUB = 1,
+ LJCA_DIAG_STUB,
+ LJCA_GPIO_STUB,
+ LJCA_I2C_STUB,
+ LJCA_SPI_STUB,
+};
+
+/* command Flags */
+#define LJCA_ACK_FLAG BIT(0)
+#define LJCA_RESP_FLAG BIT(1)
+#define LJCA_CMPL_FLAG BIT(2)
+
+/* MNG stub commands */
+enum ljca_mng_cmd {
+ LJCA_MNG_GET_VERSION = 1,
+ LJCA_MNG_RESET_NOTIFY,
+ LJCA_MNG_RESET,
+ LJCA_MNG_ENUM_GPIO,
+ LJCA_MNG_ENUM_I2C,
+ LJCA_MNG_POWER_STATE_CHANGE,
+ LJCA_MNG_SET_DFU_MODE,
+ LJCA_MNG_ENUM_SPI,
+};
+
+/* DIAG commands */
+enum ljca_diag_cmd {
+ LJCA_DIAG_GET_STATE = 1,
+ LJCA_DIAG_GET_STATISTIC,
+ LJCA_DIAG_SET_TRACE_LEVEL,
+ LJCA_DIAG_SET_ECHO_MODE,
+ LJCA_DIAG_GET_FW_LOG,
+ LJCA_DIAG_GET_FW_COREDUMP,
+ LJCA_DIAG_TRIGGER_WDT,
+ LJCA_DIAG_TRIGGER_FAULT,
+ LJCA_DIAG_FEED_WDT,
+ LJCA_DIAG_GET_SECURE_STATE,
+};
+
+struct ljca_i2c_ctr_info {
+ u8 id;
+ u8 capacity;
+ u8 intr_pin;
+} __packed;
+
+struct ljca_i2c_descriptor {
+ u8 num;
+ struct ljca_i2c_ctr_info info[];
+} __packed;
+
+struct ljca_spi_ctr_info {
+ u8 id;
+ u8 capacity;
+} __packed;
+
+struct ljca_spi_descriptor {
+ u8 num;
+ struct ljca_spi_ctr_info info[];
+} __packed;
+
+struct ljca_bank_descriptor {
+ u8 bank_id;
+ u8 pin_num;
+
+ /* 1 bit for each gpio, 1 means valid */
+ u32 valid_pins;
+} __packed;
+
+struct ljca_gpio_descriptor {
+ u8 pins_per_bank;
+ u8 bank_num;
+ struct ljca_bank_descriptor bank_desc[];
+} __packed;
+
+#define LJCA_MAX_PACKET_SIZE 64
+#define LJCA_MAX_PAYLOAD_SIZE (LJCA_MAX_PACKET_SIZE - sizeof(struct ljca_msg))
+#define LJCA_USB_WRITE_TIMEOUT_MS 200
+#define LJCA_USB_WRITE_ACK_TIMEOUT_MS 500
+#define LJCA_USB_ENUM_STUB_TIMEOUT_MS 20
+
+struct ljca_event_cb_entry {
+ ljca_event_cb_t notify;
+ void *context;
+};
+
+struct ljca_dev {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ u8 in_ep; /* the address of the bulk in endpoint */
+ u8 out_ep; /* the address of the bulk out endpoint */
+
+ /* the urb/buffer for read */
+ struct urb *in_urb;
+ unsigned char *ibuf;
+ size_t ibuf_len;
+
+ /* mutex to protect all fields in this structure */
+ struct mutex mutex;
+ bool started;
+ struct list_head stubs_list;
+
+ /* to wait for an ongoing write ack */
+ wait_queue_head_t ack_wq;
+
+ struct auxiliary_device auxdevs[LJCA_ACPI_MATCH_MAX];
+ int auxdev_count;
+};
+
+struct ljca {
+ u8 type;
+ struct ljca_dev *dev;
+};
+
+struct ljca_stub_packet {
+ unsigned int *ibuf_len;
+ u8 *ibuf;
+};
+
+struct ljca_stub {
+ struct list_head list;
+ struct usb_interface *intf;
+ struct ljca_stub_packet ipacket;
+ u8 type;
+
+ /* for identify ack */
+ bool acked;
+ int cur_cmd;
+
+ struct ljca_event_cb_entry event_entry;
+ /* lock to protect event_entry */
+ spinlock_t event_cb_lock;
+
+ struct ljca ljca;
+ unsigned long priv[];
+};
+
+static inline void *ljca_priv(struct ljca_stub *stub)
+{
+ return stub->priv;
+}
+
+static bool ljca_validate(struct ljca_msg *header, u32 data_len)
+{
+ return header->len + sizeof(*header) == data_len;
+}
+
+static struct ljca_stub *ljca_stub_alloc(struct ljca_dev *dev, u8 type, int priv_size)
+{
+ struct ljca_stub *stub;
+
+ stub = kzalloc(struct_size(stub, priv, priv_size), GFP_KERNEL);
+ if (!stub)
+ return ERR_PTR(-ENOMEM);
+
+ stub->type = type;
+ stub->intf = usb_get_intf(dev->intf);
+ stub->ljca.dev = dev;
+ stub->ljca.type = stub->type;
+ spin_lock_init(&stub->event_cb_lock);
+ list_add_tail(&stub->list, &dev->stubs_list);
+
+ return stub;
+}
+
+static void ljca_stub_destroy(struct ljca_stub *stub)
+{
+ usb_put_intf(stub->intf);
+ list_del_init(&stub->list);
+ kfree(stub);
+}
+
+static void ljca_stub_cleanup(struct ljca_dev *dev)
+{
+ struct ljca_stub *stub, *next;
+
+ list_for_each_entry_safe(stub, next, &dev->stubs_list, list) {
+ ljca_stub_destroy(stub);
+ }
+}
+
+static struct ljca_stub *ljca_stub_find(struct ljca_dev *dev, u8 type)
+{
+ struct ljca_stub *stub;
+
+ list_for_each_entry(stub, &dev->stubs_list, list) {
+ if (stub->type == type)
+ return stub;
+ }
+
+ dev_err(&dev->intf->dev, "USB stub not found, type:%d\n", type);
+
+ return ERR_PTR(-ENODEV);
+}
+
+static void ljca_stub_notify(struct ljca_stub *stub, u8 cmd, const void *evt_data, int len)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&stub->event_cb_lock, flags);
+ if (stub->event_entry.notify && stub->event_entry.context)
+ stub->event_entry.notify(stub->event_entry.context, cmd, evt_data, len);
+ spin_unlock_irqrestore(&stub->event_cb_lock, flags);
+}
+
+static int ljca_parse(struct ljca_dev *dev, struct ljca_msg *header)
+{
+ struct ljca_stub *stub;
+
+ stub = ljca_stub_find(dev, header->type);
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ if (!(header->flags & LJCA_ACK_FLAG)) {
+ ljca_stub_notify(stub, header->cmd, header->data, header->len);
+ return 0;
+ }
+
+ if (stub->cur_cmd != header->cmd) {
+ dev_err(&dev->intf->dev, "header and stub current command mismatch (%x vs %x)\n",
+ header->cmd, stub->cur_cmd);
+ return -EINVAL;
+ }
+
+ if (stub->ipacket.ibuf && stub->ipacket.ibuf_len) {
+ unsigned int newlen;
+
+ newlen = min_t(unsigned int, header->len, *stub->ipacket.ibuf_len);
+
+ *stub->ipacket.ibuf_len = newlen;
+ memcpy(stub->ipacket.ibuf, header->data, newlen);
+ }
+
+ stub->acked = true;
+ wake_up(&dev->ack_wq);
+
+ return 0;
+}
+
+static int ljca_stub_write(struct ljca_stub *stub, u8 cmd, const void *obuf, unsigned int obuf_len,
+ void *ibuf, unsigned int *ibuf_len, bool wait_ack, unsigned long timeout)
+{
+ struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+ u8 flags = LJCA_CMPL_FLAG;
+ struct ljca_msg *header;
+ unsigned int msg_len = sizeof(*header) + obuf_len;
+ int actual;
+ int ret;
+
+ if (msg_len > LJCA_MAX_PACKET_SIZE)
+ return -EINVAL;
+
+ if (wait_ack)
+ flags |= LJCA_ACK_FLAG;
+
+ header = kmalloc(msg_len, GFP_KERNEL);
+ if (!header)
+ return -ENOMEM;
+
+ header->type = stub->type;
+ header->cmd = cmd;
+ header->flags = flags;
+ header->len = obuf_len;
+
+ if (obuf)
+ memcpy(header->data, obuf, obuf_len);
+
+ dev_dbg(&dev->intf->dev, "send: type:%d cmd:%d flags:%d len:%d\n", header->type,
+ header->cmd, header->flags, header->len);
+
+ usb_autopm_get_interface(dev->intf);
+ if (!dev->started) {
+ kfree(header);
+ ret = -ENODEV;
+ goto error_put;
+ }
+
+ mutex_lock(&dev->mutex);
+ stub->cur_cmd = cmd;
+ stub->ipacket.ibuf = ibuf;
+ stub->ipacket.ibuf_len = ibuf_len;
+ stub->acked = false;
+ ret = usb_bulk_msg(interface_to_usbdev(dev->intf),
+ usb_sndbulkpipe(interface_to_usbdev(dev->intf), dev->out_ep), header,
+ msg_len, &actual, LJCA_USB_WRITE_TIMEOUT_MS);
+ kfree(header);
+ if (ret) {
+ dev_err(&dev->intf->dev, "bridge write failed ret:%d\n", ret);
+ goto error_unlock;
+ }
+
+ if (actual != msg_len) {
+ dev_err(&dev->intf->dev, "bridge write length mismatch (%d vs %d)\n", msg_len,
+ actual);
+ ret = -EINVAL;
+ goto error_unlock;
+ }
+
+ if (wait_ack) {
+ ret = wait_event_timeout(dev->ack_wq, stub->acked, msecs_to_jiffies(timeout));
+ if (!ret) {
+ dev_err(&dev->intf->dev, "acked wait timeout\n");
+ ret = -ETIMEDOUT;
+ goto error_unlock;
+ }
+ }
+
+ ret = 0;
+error_unlock:
+ stub->ipacket.ibuf = NULL;
+ stub->ipacket.ibuf_len = NULL;
+ mutex_unlock(&dev->mutex);
+error_put:
+ usb_autopm_put_interface(dev->intf);
+
+ return ret;
+}
+
+static int ljca_transfer_internal(struct ljca *ljca, u8 cmd, const void *obuf,
+ unsigned int obuf_len, void *ibuf, unsigned int *ibuf_len,
+ bool wait_ack)
+{
+ struct ljca_stub *stub;
+
+ stub = ljca_stub_find(ljca->dev, ljca->type);
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ return ljca_stub_write(stub, cmd, obuf, obuf_len, ibuf, ibuf_len, wait_ack,
+ LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+static void ljca_read_complete(struct urb *urb)
+{
+ struct ljca_msg *header = urb->transfer_buffer;
+ struct ljca_dev *dev = urb->context;
+ int len = urb->actual_length;
+ int ret;
+
+ WARN_ON_ONCE(!dev);
+ WARN_ON_ONCE(!header);
+
+ if (urb->status) {
+ /* sync/async unlink faults aren't errors */
+ if (urb->status == -ENOENT || urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN)
+ return;
+
+ dev_err(&dev->intf->dev, "read bulk urb transfer failed: %d\n", urb->status);
+ goto resubmit;
+ }
+
+ dev_dbg(&dev->intf->dev, "receive: type:%d cmd:%d flags:%d len:%d\n", header->type,
+ header->cmd, header->flags, header->len);
+
+ if (!ljca_validate(header, len)) {
+ dev_err(&dev->intf->dev, "data not correct header->len:%d payload_len:%d\n ",
+ header->len, len);
+ goto resubmit;
+ }
+
+ ret = ljca_parse(dev, header);
+ if (ret)
+ dev_err(&dev->intf->dev, "failed to parse data: ret:%d type:%d len:%d\n", ret,
+ header->type, header->len);
+
+resubmit:
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret)
+ dev_err(&dev->intf->dev, "failed submitting read urb, error %d\n", ret);
+}
+
+static int ljca_start(struct ljca_dev *dev)
+{
+ int ret;
+
+ usb_fill_bulk_urb(dev->in_urb, interface_to_usbdev(dev->intf),
+ usb_rcvbulkpipe(interface_to_usbdev(dev->intf), dev->in_ep), dev->ibuf,
+ dev->ibuf_len, ljca_read_complete, dev);
+
+ ret = usb_submit_urb(dev->in_urb, GFP_KERNEL);
+ if (ret) {
+ dev_err(&dev->intf->dev, "failed submitting read urb, error %d\n", ret);
+ return ret;
+ }
+
+ mutex_lock(&dev->mutex);
+ dev->started = true;
+ mutex_unlock(&dev->mutex);
+
+ return 0;
+}
+
+struct ljca_mng_priv {
+ u32 reset_id;
+};
+
+static int ljca_mng_reset_handshake(struct ljca_stub *stub)
+{
+ struct ljca_mng_priv *priv;
+ __le32 reset_id;
+ __le32 reset_id_ret = 0;
+ unsigned int ilen = sizeof(__le32);
+ int ret;
+
+ priv = ljca_priv(stub);
+ reset_id = cpu_to_le32(priv->reset_id++);
+ ret = ljca_stub_write(stub, LJCA_MNG_RESET_NOTIFY, &reset_id, sizeof(reset_id),
+ &reset_id_ret, &ilen, true, LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+ if (ret)
+ return ret;
+
+ if (ilen != sizeof(reset_id_ret) || reset_id_ret != reset_id) {
+ dev_err(&stub->intf->dev, "mng reset notify failed reset_id:%u/%u\n",
+ le32_to_cpu(reset_id_ret), le32_to_cpu(reset_id));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void ljca_aux_release(struct device *dev) {}
+
+static int ljca_add_aux_dev(struct ljca_dev *dev, char *name, unsigned int id, unsigned int adr,
+ void *data)
+{
+ struct auxiliary_device *auxdev;
+ struct acpi_device *parent;
+ struct acpi_device *adev = NULL;
+ int ret;
+
+ if (dev->auxdev_count >= ARRAY_SIZE(dev->auxdevs))
+ return -EINVAL;
+
+ auxdev = &dev->auxdevs[dev->auxdev_count];
+ auxdev->name = name;
+ auxdev->id = id;
+ auxdev->dev.platform_data = data;
+ auxdev->dev.parent = &dev->intf->dev;
+ auxdev->dev.release = ljca_aux_release;
+
+ ret = auxiliary_device_init(auxdev);
+ if (ret)
+ return ret;
+
+ /* new auxiliary device bind to acpi device */
+ parent = ACPI_COMPANION(&dev->intf->dev);
+ adev = acpi_find_child_device(parent, adr, false);
+ ACPI_COMPANION_SET(&auxdev->dev, adev ?: parent);
+
+ ret = auxiliary_device_add(auxdev);
+ if (ret) {
+ dev_err(&dev->intf->dev, "failed to add auxiliary dev %s.%d\n", name, id);
+ auxiliary_device_uninit(auxdev);
+ return ret;
+ }
+
+ dev->auxdev_count++;
+
+ return 0;
+}
+
+static void ljca_cleanup_aux_dev(struct ljca_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < dev->auxdev_count; i++) {
+ auxiliary_device_delete(&dev->auxdevs[i]);
+ auxiliary_device_uninit(&dev->auxdevs[i]);
+ }
+}
+
+static int ljca_gpio_stub_init(struct ljca_dev *dev, struct ljca_gpio_descriptor *desc)
+{
+ u32 valid_pin[LJCA_MAX_GPIO_NUM / BITS_PER_TYPE(u32)];
+ struct ljca_gpio_info *gpio_info;
+ struct ljca_stub *stub;
+ int gpio_num;
+ int i;
+ int ret;
+
+ gpio_num = desc->pins_per_bank * desc->bank_num;
+ if (gpio_num > LJCA_MAX_GPIO_NUM)
+ return -EINVAL;
+
+ stub = ljca_stub_alloc(dev, LJCA_GPIO_STUB, sizeof(*gpio_info));
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ gpio_info = ljca_priv(stub);
+ gpio_info->ljca = &stub->ljca;
+ gpio_info->num = gpio_num;
+
+ for (i = 0; i < desc->bank_num; i++)
+ valid_pin[i] = desc->bank_desc[i].valid_pins;
+
+ bitmap_from_arr32(gpio_info->valid_pin_map, valid_pin, gpio_num);
+
+ ret = ljca_add_aux_dev(dev, "ljca-gpio", 0, LJCA_ACPI_MATCH_GPIO, gpio_info);
+ if (ret)
+ ljca_stub_destroy(stub);
+
+ return ret;
+}
+
+static int ljca_mng_enum_gpio(struct ljca_stub *stub)
+{
+ struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+ char buf[LJCA_MAX_PAYLOAD_SIZE];
+ struct ljca_gpio_descriptor *desc;
+ unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+ int ret;
+
+ ret = ljca_stub_write(stub, LJCA_MNG_ENUM_GPIO, NULL, 0, buf, &len, true,
+ LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+ if (ret)
+ return ret;
+
+ desc = (struct ljca_gpio_descriptor *)buf;
+ if (len != struct_size(desc, bank_desc, desc->bank_num)) {
+ dev_err(&stub->intf->dev, "GPIO enumeration failed, len:%u bank_num:%u\n", len,
+ desc->bank_num);
+ return -EINVAL;
+ }
+
+ return ljca_gpio_stub_init(dev, desc);
+}
+
+static int ljca_i2c_stub_init(struct ljca_dev *dev, struct ljca_i2c_descriptor *desc)
+{
+ struct ljca_i2c_info *i2c_info;
+ struct ljca_stub *stub;
+ int ret;
+ int i;
+
+ stub = ljca_stub_alloc(dev, LJCA_I2C_STUB, size_mul(desc->num, sizeof(*i2c_info)));
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ i2c_info = ljca_priv(stub);
+
+ for (i = 0; i < desc->num; i++) {
+ i2c_info[i].ljca = &stub->ljca;
+ i2c_info[i].id = desc->info[i].id;
+ i2c_info[i].capacity = desc->info[i].capacity;
+ i2c_info[i].intr_pin = desc->info[i].intr_pin;
+
+ ret = ljca_add_aux_dev(dev, "ljca-i2c", i, LJCA_ACPI_MATCH_I2C1 + i,
+ &i2c_info[i]);
+ if (ret) {
+ ljca_stub_destroy(stub);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ljca_mng_enum_i2c(struct ljca_stub *stub)
+{
+ struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+ char buf[LJCA_MAX_PAYLOAD_SIZE];
+ struct ljca_i2c_descriptor *desc;
+ unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+ int ret;
+
+ ret = ljca_stub_write(stub, LJCA_MNG_ENUM_I2C, NULL, 0, buf, &len, true,
+ LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+ if (ret) {
+ dev_err(&stub->intf->dev, "I2C enumeration failed, ret:%d len:%u\n", ret, len);
+ return ret;
+ }
+
+ desc = (struct ljca_i2c_descriptor *)buf;
+ return ljca_i2c_stub_init(dev, desc);
+}
+
+static int ljca_spi_stub_init(struct ljca_dev *dev, struct ljca_spi_descriptor *desc)
+{
+ struct ljca_spi_info *spi_info;
+ struct ljca_stub *stub;
+ int i;
+ int ret;
+
+ stub = ljca_stub_alloc(dev, LJCA_SPI_STUB, size_mul(desc->num, sizeof(*spi_info)));
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ spi_info = ljca_priv(stub);
+ for (i = 0; i < desc->num; i++) {
+ spi_info[i].ljca = &stub->ljca;
+ spi_info[i].id = desc->info[i].id;
+ spi_info[i].capacity = desc->info[i].capacity;
+
+ ret = ljca_add_aux_dev(dev, "ljca-spi", i, LJCA_ACPI_MATCH_SPI1 + i,
+ &spi_info[i]);
+ if (ret) {
+ ljca_stub_destroy(stub);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ljca_mng_enum_spi(struct ljca_stub *stub)
+{
+ struct ljca_dev *dev = usb_get_intfdata(stub->intf);
+ char buf[LJCA_MAX_PAYLOAD_SIZE];
+ struct ljca_spi_descriptor *desc;
+ unsigned int len = LJCA_MAX_PAYLOAD_SIZE;
+ int ret;
+
+ ret = ljca_stub_write(stub, LJCA_MNG_ENUM_SPI, NULL, 0, buf, &len, true,
+ LJCA_USB_ENUM_STUB_TIMEOUT_MS);
+ if (ret) {
+ dev_err(&stub->intf->dev, "SPI enumeration failed, ret:%d len:%d\n", ret, len);
+ return ret;
+ }
+
+ desc = (struct ljca_spi_descriptor *)buf;
+ return ljca_spi_stub_init(dev, desc);
+}
+
+static int ljca_mng_get_version(struct ljca_stub *stub, char *buf)
+{
+ struct fw_version version = {};
+ unsigned int len = sizeof(version);
+ int ret;
+
+ ret = ljca_stub_write(stub, LJCA_MNG_GET_VERSION, NULL, 0, &version, &len, true,
+ LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+ if (ret)
+ return ret;
+
+ if (len != sizeof(version)) {
+ dev_err(&stub->intf->dev, "get version failed, len:%d\n", len);
+ return -EINVAL;
+ }
+
+ return sysfs_emit(buf, "%d.%d.%d.%d\n", version.major, version.minor,
+ le16_to_cpu(version.patch), le16_to_cpu(version.build));
+}
+
+static inline int ljca_mng_set_dfu_mode(struct ljca_stub *stub)
+{
+ return ljca_stub_write(stub, LJCA_MNG_SET_DFU_MODE, NULL, 0, NULL, NULL, true,
+ LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+static int ljca_mng_link(struct ljca_dev *dev, struct ljca_stub *stub)
+{
+ int ret;
+
+ ret = ljca_mng_reset_handshake(stub);
+ if (ret)
+ return ret;
+
+ /* try to enum all the stubs */
+ ret = ljca_mng_enum_gpio(stub);
+ if (ret)
+ dev_warn(&dev->intf->dev, "GPIO function does not support yet\n");
+
+ ret = ljca_mng_enum_i2c(stub);
+ if (ret)
+ dev_warn(&dev->intf->dev, "I2C function does not support yet\n");
+
+ ret = ljca_mng_enum_spi(stub);
+ if (ret)
+ dev_warn(&dev->intf->dev, "SPI function does not support yet\n");
+
+ return 0;
+}
+
+static int ljca_mng_init(struct ljca_dev *dev)
+{
+ struct ljca_stub *stub;
+ struct ljca_mng_priv *priv;
+ int ret;
+
+ stub = ljca_stub_alloc(dev, LJCA_MNG_STUB, sizeof(*priv));
+ if (IS_ERR(stub))
+ return PTR_ERR(stub);
+
+ priv = ljca_priv(stub);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->reset_id = 0;
+
+ ret = ljca_mng_link(dev, stub);
+ if (ret)
+ dev_err(&dev->intf->dev, "mng stub link failed, ret:%d\n", ret);
+
+ return ret;
+}
+
+static inline int ljca_diag_set_trace_level(struct ljca_stub *stub, u8 level)
+{
+ return ljca_stub_write(stub, LJCA_DIAG_SET_TRACE_LEVEL, &level, sizeof(level), NULL, NULL,
+ true, LJCA_USB_WRITE_ACK_TIMEOUT_MS);
+}
+
+static int ljca_diag_init(struct ljca_dev *dev)
+{
+ struct ljca_stub *stub;
+
+ stub = ljca_stub_alloc(dev, LJCA_DIAG_STUB, 0);
+
+ return PTR_ERR_OR_ZERO(stub);
+}
+
+static void ljca_delete(struct ljca_dev *dev)
+{
+ mutex_destroy(&dev->mutex);
+ usb_free_urb(dev->in_urb);
+ usb_put_intf(dev->intf);
+}
+
+static int ljca_init(struct ljca_dev *dev)
+{
+ mutex_init(&dev->mutex);
+ init_waitqueue_head(&dev->ack_wq);
+ INIT_LIST_HEAD(&dev->stubs_list);
+
+ return 0;
+}
+
+static void ljca_stop(struct ljca_dev *dev)
+{
+ mutex_lock(&dev->mutex);
+ dev->started = false;
+ mutex_unlock(&dev->mutex);
+ usb_kill_urb(dev->in_urb);
+}
+
+static ssize_t ljca_enable_dfu_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+ struct ljca_stub *mng_stub = ljca_stub_find(ljca_dev, LJCA_MNG_STUB);
+ bool enable;
+ int ret;
+
+ ret = kstrtobool(buf, &enable);
+ if (ret)
+ return ret;
+
+ if (enable) {
+ ret = ljca_mng_set_dfu_mode(mng_stub);
+ if (ret)
+ return ret;
+ }
+
+ return count;
+}
+static DEVICE_ATTR_WO(ljca_enable_dfu);
+
+static ssize_t ljca_trace_level_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+ struct ljca_stub *diag_stub = ljca_stub_find(ljca_dev, LJCA_DIAG_STUB);
+ u8 level;
+ int ret;
+
+ if (kstrtou8(buf, 0, &level))
+ return -EINVAL;
+
+ ret = ljca_diag_set_trace_level(diag_stub, level);
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR_WO(ljca_trace_level);
+
+static ssize_t ljca_version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct ljca_dev *ljca_dev = usb_get_intfdata(intf);
+ struct ljca_stub *stub = ljca_stub_find(ljca_dev, LJCA_MNG_STUB);
+
+ return ljca_mng_get_version(stub, buf);
+}
+static DEVICE_ATTR_RO(ljca_version);
+
+static struct attribute *ljca_attrs[] = {
+ &dev_attr_ljca_version.attr,
+ &dev_attr_ljca_enable_dfu.attr,
+ &dev_attr_ljca_trace_level.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(ljca);
+
+static int ljca_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct ljca_dev *dev;
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+ int ret;
+
+ /* allocate memory for our device state and initialize it */
+ dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ ljca_init(dev);
+ dev->intf = usb_get_intf(intf);
+
+ /* set up the endpoint information use only the first bulk-in and bulk-out endpoints */
+ ret = usb_find_common_endpoints(intf->cur_altsetting, &bulk_in, &bulk_out, NULL, NULL);
+ if (ret) {
+ dev_err(&intf->dev, "could not find both bulk-in and bulk-out endpoints\n");
+ goto error;
+ }
+
+ dev->ibuf_len = usb_endpoint_maxp(bulk_in);
+ dev->in_ep = bulk_in->bEndpointAddress;
+ dev->ibuf = devm_kzalloc(&intf->dev, dev->ibuf_len, GFP_KERNEL);
+ if (!dev->ibuf) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ dev->in_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->in_urb) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ dev->out_ep = bulk_out->bEndpointAddress;
+ /* save our data pointer in this intf device */
+ usb_set_intfdata(intf, dev);
+ ret = ljca_start(dev);
+ if (ret) {
+ dev_err(&intf->dev, "bridge read start failed ret %d\n", ret);
+ goto error;
+ }
+
+ ret = ljca_mng_init(dev);
+ if (ret) {
+ dev_err(&intf->dev, "register mng stub failed ret %d\n", ret);
+ goto error_stop;
+ }
+
+ ret = ljca_diag_init(dev);
+ if (ret) {
+ dev_err(&intf->dev, "register diag stub failed ret %d\n", ret);
+ goto error_stop;
+ }
+
+ usb_enable_autosuspend(interface_to_usbdev(dev->intf));
+ return 0;
+error_stop:
+ ljca_stop(dev);
+ ljca_cleanup_aux_dev(dev);
+ ljca_stub_cleanup(dev);
+error:
+ dev_err(&intf->dev, "LJCA USB device init failed\n");
+ ljca_delete(dev);
+
+ return ret;
+}
+
+static void ljca_disconnect(struct usb_interface *intf)
+{
+ struct ljca_dev *dev = usb_get_intfdata(intf);
+
+ ljca_stop(dev);
+ ljca_cleanup_aux_dev(dev);
+ ljca_stub_cleanup(dev);
+ ljca_delete(dev);
+}
+
+static int ljca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct ljca_dev *dev = usb_get_intfdata(intf);
+
+ ljca_stop(dev);
+
+ return 0;
+}
+
+static int ljca_resume(struct usb_interface *intf)
+{
+ struct ljca_dev *dev = usb_get_intfdata(intf);
+
+ return ljca_start(dev);
+}
+
+static const struct usb_device_id ljca_table[] = {
+ {USB_DEVICE(0x8086, 0x0b63)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, ljca_table);
+
+static struct usb_driver ljca_driver = {
+ .name = "ljca",
+ .probe = ljca_probe,
+ .disconnect = ljca_disconnect,
+ .suspend = ljca_suspend,
+ .resume = ljca_resume,
+ .id_table = ljca_table,
+ .dev_groups = ljca_groups,
+ .supports_autosuspend = 1,
+};
+module_usb_driver(ljca_driver);
+
+MODULE_AUTHOR("Ye Xiang <xiang.ye@...el.com>");
+MODULE_AUTHOR("Wang Zhifeng <zhifeng.wang@...el.com>");
+MODULE_AUTHOR("Zhang Lixu <lixu.zhang@...el.com>");
+MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/ljca.h b/include/linux/usb/ljca.h
new file mode 100644
index 000000000000..057f18c5b17a
--- /dev/null
+++ b/include/linux/usb/ljca.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _LINUX_USB_LJCA_H_
+#define _LINUX_USB_LJCA_H_
+
+#include <linux/types.h>
+
+struct ljca;
+
+#define LJCA_MAX_GPIO_NUM 64
+struct ljca_gpio_info {
+ struct ljca *ljca;
+ unsigned int num;
+ DECLARE_BITMAP(valid_pin_map, LJCA_MAX_GPIO_NUM);
+};
+
+struct ljca_i2c_info {
+ struct ljca *ljca;
+ u8 id;
+ u8 capacity;
+ u8 intr_pin;
+};
+
+struct ljca_spi_info {
+ struct ljca *ljca;
+ u8 id;
+ u8 capacity;
+};
+
+#endif
--
2.34.1
Powered by blists - more mailing lists