linux-kernel - [PATCH 04/14] arm64: dts: qcom: sc7180: Annotate l13a on trogdor to always-on

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230323102605.4.I9f47a8a53eacff6229711a827993792ceeb36971@changeid>
Date:   Thu, 23 Mar 2023 10:30:08 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Mark Brown <broonie@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Matthias Kaehlcke <mka@...omium.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        linux-gpio@...r.kernel.org, Stephen Boyd <swboyd@...omium.org>,
        devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-spi@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>,
        Andy Gross <agross@...nel.org>, linux-kernel@...r.kernel.org
Subject: [PATCH 04/14] arm64: dts: qcom: sc7180: Annotate l13a on trogdor to always-on

The l13a rail on trogdor devices has always been intended to be
always-on on both S0 and S3. Different trogdor variants use l13a in
slightly different ways, but the overall theme is that it's a 1.8V
rail that the board uses for things that it wants powered in on S0 and
S3. On many boards this includes the boot SPI (AKA qspi).

For all intents and purposes this patch is actually a no-op since
something else in the system seems to already be keeping the rail on
all the time (confirmed via multimeter). That "something else" was
postulated to be the modem but the rail is on / stays on even without
the modem/wifi coming up so it's likely the boot config. In any case,
making the fact that this is always-on explicit seems like a good
idea.

Signed-off-by: Douglas Anderson <dianders@...omium.org>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 423630c4d02c..1f2e1f701761 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -512,6 +512,8 @@ pp1800_l13a: ldo13 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
 		};

 		pp1800_prox:
-- 
2.40.0.348.gf938b09366-goog