[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230323102605.11.Ia439c29517b1c0625325a54387b047f099d16425@changeid>
Date: Thu, 23 Mar 2023 10:30:15 -0700
From: Douglas Anderson <dianders@...omium.org>
To: Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Matthias Kaehlcke <mka@...omium.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
linux-gpio@...r.kernel.org, Stephen Boyd <swboyd@...omium.org>,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-spi@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>,
Andy Gross <agross@...nel.org>, linux-kernel@...r.kernel.org
Subject: [PATCH 11/14] arm64: dts: qcom: sdm845: Remove superfluous "input-enable"s from cheza
As talked about in the patch ("dt-bindings: pinctrl: qcom: tlmm should
use output-disable, not input-enable"), using "input-enable" in
pinctrl states for Qualcomm TLMM pinctrl devices was either
superfluous or there to disable a pin's output.
Looking at cheza
* ec_ap_int_l, h1_ap_int_odl: Superfluous. The pins will be configured
as inputs automatically by the Linux GPIO subsystem (presumably the
reference for other OSes using these device trees).
* bios_flash_wp_l: Superfluous. This pin is exposed to userspace
through the kernel's GPIO API and will be configured automatically.
That means that in none of the cases for cheza did we need to change
"input-enable" to "output-disable" and we can just remove these
superfluous properties.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index f2b48241d15c..588165ee74b3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1155,14 +1155,12 @@ ap_edp_bklten: ap-edp-bklten-state {
bios_flash_wp_r_l: bios-flash-wp-r-l-state {
pins = "gpio128";
function = "gpio";
- input-enable;
bias-disable;
};
ec_ap_int_l: ec-ap-int-l-state {
pins = "gpio122";
function = "gpio";
- input-enable;
bias-pull-up;
};
@@ -1190,7 +1188,6 @@ en_pp3300_dx_edp: en-pp3300-dx-edp-state {
h1_ap_int_odl: h1-ap-int-odl-state {
pins = "gpio129";
function = "gpio";
- input-enable;
bias-pull-up;
};
--
2.40.0.348.gf938b09366-goog
Powered by blists - more mailing lists