| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <10c6640e-4de3-65dd-8798-988def9a6cc5@wanadoo.fr>
Date: Thu, 23 Mar 2023 21:06:20 +0100
From: Christophe JAILLET <christophe.jaillet@...adoo.fr>
To: Naresh Solanki <naresh.solanki@...ements.com>
Cc: jic23@...nel.org, lars@...afoo.de, lee@...nel.org,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
patrick.rudolph@...ements.com
Subject: Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
Le 23/03/2023 à 20:45, Naresh Solanki a écrit :
> From: Patrick Rudolph <patrick.rudolph-cWEv32IpryCakBO8gow8eQ@...lic.gmane.org>
>
> max597x has 10bit ADC for voltage & current monitoring.
> Use iio framework to expose the same in sysfs.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph-cWEv32IpryCakBO8gow8eQ@...lic.gmane.org>
> Signed-off-by: Naresh Solanki <Naresh.Solanki-cWEv32IpryCakBO8gow8eQ@...lic.gmane.org>
Hi, a few nits below, should there be a v3.
CJ
> ...
> Changes in V2:
> - Remove fallthrough
> - Use pdev->dev instead of i2c->dev
> - Init indio_dev->name based on device type.
> ---
> drivers/iio/adc/Kconfig | 15 ++++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/max597x-iio.c | 152 ++++++++++++++++++++++++++++++++++
> 3 files changed, 168 insertions(+)
> create mode 100644 drivers/iio/adc/max597x-iio.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 45af2302be53..0d1a3dea0b7d 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -735,6 +735,21 @@ config MAX1363
> To compile this driver as a module, choose M here: the module will be
> called max1363.
>
> +config MAX597X_IIO
> + tristate "Maxim 597x power switch and monitor"
> + depends on I2C && OF
> + select MFD_MAX597X
> + help
> + This driver enables support for the Maxim 597x smart switch and
> + voltage/current monitoring interface using the Industrial I/O (IIO)
> + framework. The Maxim 597x is a power switch and monitor that can
> + provide voltage and current measurements via the I2C bus. Enabling
> + this driver will allow user space applications to read the voltage
> + and current measurements using IIO interfaces.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called max597x-iio.
> +
> config MAX9611
> tristate "Maxim max9611/max9612 ADC driver"
> depends on I2C
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 36c18177322a..7ec0c2cf7bbb 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -67,6 +67,7 @@ obj-$(CONFIG_MAX11205) += max11205.o
> obj-$(CONFIG_MAX11410) += max11410.o
> obj-$(CONFIG_MAX1241) += max1241.o
> obj-$(CONFIG_MAX1363) += max1363.o
> +obj-$(CONFIG_MAX597X_IIO) += max597x-iio.o
> obj-$(CONFIG_MAX9611) += max9611.o
> obj-$(CONFIG_MCP320X) += mcp320x.o
> obj-$(CONFIG_MCP3422) += mcp3422.o
> diff --git a/drivers/iio/adc/max597x-iio.c b/drivers/iio/adc/max597x-iio.c
> new file mode 100644
> index 000000000000..8a9fc27ff71e
> --- /dev/null
> +++ b/drivers/iio/adc/max597x-iio.c
> @@ -0,0 +1,152 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device driver for IIO in MAX5970 and MAX5978 IC
> + *
> + * Copyright (c) 2022 9elements GmbH
> + *
> + * Author: Patrick Rudolph <patrick.rudolph-cWEv32IpryCakBO8gow8eQ@...lic.gmane.org>
> + */
> +
> +#include <linux/iio/iio.h>
> +#include <linux/mfd/max597x.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +struct max597x_iio {
> + struct regmap *regmap;
> + int shunt_micro_ohms[MAX5970_NUM_SWITCHES];
> + unsigned int irng[MAX5970_NUM_SWITCHES];
> + unsigned int mon_rng[MAX5970_NUM_SWITCHES];
> +};
> +
> +#define MAX597X_ADC_CHANNEL(_idx, _type) { \
> + .type = IIO_ ## _type, \
> + .indexed = 1, \
> + .channel = (_idx), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .address = MAX5970_REG_ ## _type ## _L(_idx), \
> +}
> +
> +static const struct iio_chan_spec max5978_adc_iio_channels[] = {
> + MAX597X_ADC_CHANNEL(0, VOLTAGE),
> + MAX597X_ADC_CHANNEL(0, CURRENT),
> +};
> +
> +static const struct iio_chan_spec max5970_adc_iio_channels[] = {
> + MAX597X_ADC_CHANNEL(0, VOLTAGE),
> + MAX597X_ADC_CHANNEL(0, CURRENT),
> + MAX597X_ADC_CHANNEL(1, VOLTAGE),
> + MAX597X_ADC_CHANNEL(1, CURRENT),
> +};
> +
> +static int max597x_iio_read_raw(struct iio_dev *iio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long info)
> +{
> + int ret;
> + struct max597x_iio *data = iio_priv(iio_dev);
> + unsigned int reg_l, reg_h;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + ret = regmap_read(data->regmap, chan->address, ®_l);
> + if (ret < 0)
> + return ret;
> + ret = regmap_read(data->regmap, chan->address - 1, ®_h);
> + if (ret < 0)
> + return ret;
> + *val = (reg_h << 2) | (reg_l & 3);
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> +
Nit: This blank line would look nicer if above the case:
> + switch (chan->address) {
> + case MAX5970_REG_CURRENT_L(0):
> + case MAX5970_REG_CURRENT_L(1):
> + /* in A, convert to mA */
> + *val = data->irng[chan->channel] * 1000;
> + *val2 =
> + data->shunt_micro_ohms[chan->channel] * ADC_MASK;
> + return IIO_VAL_FRACTIONAL;
> +
> + case MAX5970_REG_VOLTAGE_L(0):
> + case MAX5970_REG_VOLTAGE_L(1):
> + /* in uV, convert to mV */
> + *val = data->mon_rng[chan->channel];
> + *val2 = ADC_MASK * 1000;
> + return IIO_VAL_FRACTIONAL;
> + }
> +
> + break;
> + }
> + return -EINVAL;
> +}
> +
> +static const struct iio_info max597x_adc_iio_info = {
> + .read_raw = &max597x_iio_read_raw,
> +};
> +
> +static int max597x_iio_probe(struct platform_device *pdev)
> +{
> + struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
> + struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + struct iio_dev *indio_dev;
> + struct max597x_iio *priv;
> + int ret, i;
> +
> + if (!regmap)
> + return -EPROBE_DEFER;
> +
> + if (!max597x || !max597x->num_switches)
> + return -EPROBE_DEFER;
> +
> + /* registering iio */
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
> + if (!indio_dev)
> + return dev_err_probe(&pdev->dev, -ENOMEM,
> + "failed to allocate iio device\n");
> +
> + indio_dev->info = &max597x_adc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + switch (max597x->num_switches) {
> + case MAX597x_TYPE_MAX5970:
> + indio_dev->channels = max5970_adc_iio_channels;
> + indio_dev->num_channels = ARRAY_SIZE(max5970_adc_iio_channels);
> + indio_dev->name = "max5970";
> + break;
> + case MAX597x_TYPE_MAX5978:
> + indio_dev->channels = max5978_adc_iio_channels;
> + indio_dev->num_channels = ARRAY_SIZE(max5978_adc_iio_channels);
> + indio_dev->name = "max5978";
> + break;
> + }
> +
> + priv = iio_priv(indio_dev);
> + priv->regmap = regmap;
> + for (i = 0; i < indio_dev->num_channels; i++) {
> + priv->irng[i] = max597x->irng[i];
> + priv->mon_rng[i] = max597x->mon_rng[i];
> + priv->shunt_micro_ohms[i] = max597x->shunt_micro_ohms[i];
> + }
> +
> + ret = devm_iio_device_register(&pdev->dev, indio_dev);
> + if (ret)
> + dev_err_probe(&pdev->dev, ret, "could not register iio device");
Nit: \n missing
> +
> + return ret;
Nit: return 0;
> +}
> +
> +static struct platform_driver max597x_iio_driver = {
> + .driver = {
> + .name = "max597x-iio",
> + },
> + .probe = max597x_iio_probe,
> +};
> +
> +module_platform_driver(max597x_iio_driver);
> +
> +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph-cWEv32IpryCakBO8gow8eQ@...lic.gmane.org>");
> +MODULE_DESCRIPTION("MAX5970_hot-swap controller driver");
> +MODULE_LICENSE("GPL");
>
> base-commit: 368eb79f738a21e16c2bdbcac2444dfa96b01aaa
Powered by blists - more mailing lists