linux-kernel - Re: [PATCH V2 0/4] clk: imx: Improve imx8mm/imx8mn LCDIF clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOMZO5B9odY1-EnKcAi=TQgzb5mwnPRXDtCdGNj+t=3wOyeAjw@mail.gmail.com>
Date:   Thu, 23 Mar 2023 19:31:22 -0300
From:   Fabio Estevam <festevam@...il.com>
To:     Adam Ford <aford173@...il.com>
Cc:     linux-clk@...r.kernel.org, aford@...conembedded.com,
        Abel Vesa <abelvesa@...nel.org>, Peng Fan <peng.fan@....com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2 0/4] clk: imx: Improve imx8mm/imx8mn LCDIF clocks

On Mon, Mar 20, 2023 at 11:31 PM Adam Ford <aford173@...il.com> wrote:
>
> Both the i.MX8M Mini and Nano have a video_pll which can be used
> to source a clock which feeds the lcdif interface.  This interface
> currently fixes video_pll and divides down the clock feeding LCDIF.
> However, when connected to an HDMI bridge chip that supports a
> variety of video resolutions and refresh rates, the only settings
> that properly sync are ones that evenly divide from the video_pll_out
> clock.
>
> This series adds the ability for the clk-compolsite-8m to
> request a better parent clock rate if the proper clock flag is
> enable and sets that flag in the corresponding imx8mm and
> imx8mn video_pll clocks to increase the number of resolutions
> and refresh rates timings that the LCDIF can produce.
>
> This also has a side benefit of allowing the video-pll to run
> at a lower clock speed which can potentially save some power
> depending on the requested resolution and refresh rate.
>
> V2:  Split off the new imx8m_clk_hw_composite_flags definition
>      into its own patch and re-order to fix build error.
>
> Adam Ford (3):
>   clk: imx: composite-8m: Add support to determine_rate
>   clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate
>   clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate

For the series:

Reviewed-by: Fabio Estevam <festevam@...il.com>

Should drivers/clk/imx/clk-imx8mp.c also be adjusted in the same way?