[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230323005925.23179-2-lujianhua000@gmail.com>
Date: Thu, 23 Mar 2023 08:59:24 +0800
From: Jianhua Lu <lujianhua000@...il.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Jianhua Lu <lujianhua000@...il.com>
Subject: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel
Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel
is a dual dsi mode panel and the dsi phy type is cphy.
Signed-off-by: Jianhua Lu <lujianhua000@...il.com>
---
Changes in v2:
- Include missing <dt-bindings/phy/phy.h> for phy-type property.
Changes in v3:
- Sort include header.
- Move qcom,sync-dual-dsi to the front of qcom,master-dsi
- Add newline before subnode.
.../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts | 5 ++
.../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 75 +++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
index bd9ad109daf9..8b2ae39950ff 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
@@ -11,3 +11,8 @@ / {
model = "Xiaomi Mi Pad 5 Pro (BOE)";
compatible = "xiaomi,elish", "qcom,sm8250";
};
+
+&display_panel {
+ compatible = "xiaomi,elish-boe-nt36523";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index a43d4b73ffca..4585f61781f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
@@ -469,6 +470,76 @@ &cdsp {
status = "okay";
};
+&dsi0 {
+ vdda-supply = <&vreg_l9a_1p2>;
+ qcom,dual-dsi-mode;
+ qcom,sync-dual-dsi;
+ qcom,master-dsi;
+ status = "okay";
+
+ display_panel: panel@0 {
+ reg = <0>;
+ vddio-supply = <&vreg_l14a_1p88>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+
+ panel_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+
+ };
+ };
+};
+
+&dsi0_out {
+ data-lanes = <0 1 2>;
+ remote-endpoint = <&panel_in_0>;
+};
+
+&dsi0_phy {
+ vdds-supply = <&vreg_l5a_0p88>;
+ phy-type = <PHY_TYPE_CPHY>;
+ status = "okay";
+};
+
+&dsi1 {
+ vdda-supply = <&vreg_l9a_1p2>;
+ qcom,dual-dsi-mode;
+ qcom,sync-dual-dsi;
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+ status = "okay";
+};
+
+&dsi1_out {
+ data-lanes = <0 1 2>;
+ remote-endpoint = <&panel_in_1>;
+};
+
+&dsi1_phy {
+ vdds-supply = <&vreg_l5a_0p88>;
+ phy-type = <PHY_TYPE_CPHY>;
+ status = "okay";
+};
+
&gmu {
status = "okay";
};
@@ -533,6 +604,10 @@ fuel-gauge@55 {
};
};
+&mdss {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
--
2.39.2
Powered by blists - more mailing lists