[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230323134156.GA4017557@gnbcxd0016.gnb.st.com>
Date: Thu, 23 Mar 2023 14:41:56 +0100
From: Alain Volmat <alain.volmat@...s.st.com>
To: Rob Herring <robh@...nel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Hector Martin <marcan@...can.st>,
Sven Peter <sven@...npeter.dev>,
Alyssa Rosenzweig <alyssa@...enzweig.io>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
Michal Simek <michal.simek@...inx.com>,
Peter Rosin <peda@...ntia.se>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
<devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <asahi@...ts.linux.dev>,
<linux-amlogic@...ts.infradead.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-i2c@...r.kernel.org>
Subject: Re: [Linux-stm32] [PATCH] dt-bindings: i2c: Drop unneeded quotes
On Wed, Mar 22, 2023 at 12:35:29PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
> ---
> Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++--
> Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 4 ++--
> Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml | 2 +-
> Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 4 ++--
> Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml | 4 ++--
> Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++--
> Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 2 +-
Reviewed-by: Alain Volmat <alain.volmat@...s.st.com>
> .../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++--
> 8 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> index 199a354ccb97..26bed558c6b8 100644
> --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
> @@ -2,8 +2,8 @@
> # Copyright 2019 BayLibre, SAS
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Amlogic Meson I2C Controller
>
> diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> index 4ac61fec90e2..243da7003cec 100644
> --- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Apple/PASemi I2C controller
>
> diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> index ea2303c0e143..6adedd3ec399 100644
> --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> @@ -75,7 +75,7 @@ required:
> - clocks
>
> allOf:
> - - $ref: "i2c-controller.yaml"
> + - $ref: i2c-controller.yaml
> - if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> index 2e95cda7262a..7a675aa08c44 100644
> --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Cadence I2C controller
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> index 6e0a5686af04..f34cc7ad5a00 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
> @@ -45,7 +45,7 @@ properties:
>
> i2c-parent:
> description: phandle of the I2C bus that this multiplexer's master-side port is connected to
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> mux-gpios:
> description: list of GPIOs used to control the muxer
> @@ -55,7 +55,7 @@ properties:
> idle-state:
> description: Value to set the muxer to when idle. When no value is given, it defaults to the
> last value used.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> allOf:
> - $ref: i2c-mux.yaml
> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> index 0e88c85985b5..9f66a3bb1f80 100644
> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Qualcomm Geni based QUP I2C Controller
>
> diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> index bf396e9466aa..94b75d9f66cd 100644
> --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> @@ -90,7 +90,7 @@ properties:
> st,syscfg-fmp:
> description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
> Plus speed is selected by slave.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: phandle to syscfg
> diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> index 1b598638d457..658ae92fa86d 100644
> --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> %YAML 1.2
> ---
> -$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Xilinx IIC controller
>
> --
> 2.39.2
>
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@...md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32
Regards,
Alain
Powered by blists - more mailing lists