[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230324215930.GA49367-robh@kernel.org>
Date: Fri, 24 Mar 2023 16:59:30 -0500
From: Rob Herring <robh@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Pavel Machek <pavel@....cz>, Lee Jones <lee@...nel.org>,
John Crispin <john@...ozen.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-leds@...r.kernel.org
Subject: Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller:
Document support for LEDs node
On Wed, Mar 22, 2023 at 12:39:48AM +0100, Christian Marangi wrote:
> On Wed, Mar 22, 2023 at 12:23:59AM +0100, Andrew Lunn wrote:
> > > > Are specific ethernet controllers allowed to add their own properties in
> > > > led nodes? If so, this doesn't work. As-is, this allows any other
> > > > properties. You need 'unevaluatedProperties: false' here to prevent
> > > > that. But then no one can add properties. If you want to support that,
> > > > then you need this to be a separate schema that devices can optionally
> > > > include if they don't extend the properties, and then devices that
> > > > extend the binding would essentially have the above with:
> > > >
> > > > $ref: /schemas/leds/common.yaml#
> > > > unevaluatedProperties: false
> > > > properties:
> > > > a-custom-device-prop: ...
> > > >
> > > >
> > > > If you wanted to define both common ethernet LED properties and
> > > > device specific properties, then you'd need to replace leds/common.yaml
> > > > above with the ethernet one.
> > > >
> > > > This is all the same reasons the DSA/switch stuff and graph bindings are
> > > > structured the way they are.
> > > >
> > >
> > > Hi Rob, thanks for the review/questions.
> > >
> > > The idea of all of this is to keep leds node as standard as possible.
> > > It was asked to add unevaluatedProperties: False but I didn't understood
> > > it was needed also for the led nodes.
> > >
> > > leds/common.yaml have additionalProperties set to true but I guess that
> > > is not OK for the final schema and we need something more specific.
> > >
> > > Looking at the common.yaml schema reg binding is missing so an
> > > additional schema is needed.
> > >
> > > Reg is needed for ethernet LEDs and PHY but I think we should also permit
> > > to skip that if the device actually have just one LED. (if this wouldn't
> > > complicate the implementation. Maybe some hints from Andrew about this
> > > decision?)
> >
> > I would make reg mandatory.
> >
>
> Ok will add a new schema and change the regex.
>
> > We should not encourage additional properties, but i also think we
> > cannot block it.
> >
> > The problem we have is that there is absolutely no standardisation
> > here. Vendors are free to do whatever they want, and they do. So i
> > would not be too surprised if some vendor properties are needed
> > eventually.
> >
>
> Think that will come later with defining a more specific schema. But I
> honestly think most of the special implementation will be handled to the
> driver internally and not with special binding in DT.
Then encourage no additional properties by letting whomever wants to add
them to restructure the schema. ;)
Rob
Powered by blists - more mailing lists