Message-Id: <20230324080543.b977c6fa769d52eedb7b428e@kernel.org>
Date:   Fri, 24 Mar 2023 08:05:43 +0800
From:   Masami Hiramatsu (Google) <mhiramat@...nel.org>
To:     Beau Belgrave <beaub@...ux.microsoft.com>
Cc:     rostedt@...dmis.org, mathieu.desnoyers@...icios.com,
        dcook@...ux.microsoft.com, alanau@...ux.microsoft.com,
        brauner@...nel.org, akpm@...ux-foundation.org,
        ebiederm@...ssion.com, keescook@...omium.org, tglx@...utronix.de,
        linux-trace-devel@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mm@...ck.org
Subject: Re: [PATCH v8 00/11] tracing/user_events: Remote write ABI

Hi Beau,

Sorry for replying so late.
I reviewed the series and I think it looks good to me.
This direction is good from the user/kernel interaction viewpoint.
I have just a couple of comments, and reply to the each mail.

Thank you!

On Tue, 21 Feb 2023 13:11:32 -0800
Beau Belgrave <beaub@...ux.microsoft.com> wrote:

> As part of the discussions for user_events aligned with user space
> tracers, it was determined that user programs should register a aligned
> value to set or clear a bit when an event becomes enabled. Currently a
> shared page is being used that requires mmap(). Remove the shared page
> implementation and move to a user registered address implementation.
> 
> In this new model during the event registration from user programs 3 new
> values are specified. The first is the address to update when the event
> is either enabled or disabled. The second is the bit to set/clear to
> reflect the event being enabled. The third is the size of the value at
> the specified address.
> 
> This allows for a local 32/64-bit value in user programs to support
> both kernel and user tracers. As an example, setting bit 31 for kernel
> tracers when the event becomes enabled allows for user tracers to use
> the other bits for ref counts or other flags. The kernel side updates
> the bit atomically, user programs need to also update these values
> atomically.
> 
> User provided addresses must be aligned on a natural boundary, this
> allows for single page checking and prevents odd behaviors such as a
> enable value straddling 2 pages instead of a single page.
> 
> When page faults are encountered they are done asyncly via a workqueue.
> If the page faults back in, the write update is attempted again. If the
> page cannot fault-in, then we log and wait until the next time the event
> is enabled/disabled. This is to prevent possible infinite loops resulting
> from bad user processes unmapping or changing protection values after
> registering the address.
> 
> Change history
> 
> V8:
> Rebase to 6.2-rc8.
> 
> V7:
> Rebase to 6.2-rc4.
> 
> Added flags to register ioctl, validates it's 0 for now. Future patches
> will enable other types of formats/options as needed.
> 
> V6:
> Rebase to 6.2-rc2.
> 
> Fixed small typos, code style.
> 
> Changed from synchronize_rcu() to queue_rcu_work() to allow an rcu
> delay asyncly when mm is being removed and in an appropriate context
> for mmdrop().
> 
> V5:
> GFP_NOWAIT is still needed in user_event_enabler_dup(), due to rcu lock.
> 
> V4:
> Rebase to 6.1-rc7.
> 
> Moved user_events_fork() out of task signal lock and dropped use of
> GFP_NOWAIT. All allocations are now GFP_KERNEL or GFP_KERNEL_ACCOUNT.
> 
> Added boot parameter user_events_max= to limit global events.
> 
> Added sysctl value kernel.user_events_max to limit global events.
> 
> Added cgroup tracking of memory allocated for events.
> 
> V3:
> Rebase to 6.1-rc6.
> 
> Removed RFC tag on series.
> 
> Updated documentation to reflect ABI changes.
> 
> Added self-test for ABI specific clone/fork cases.
> 
> Moved user_event_mm removal into do_exit() to ensure RSS task accounting
> is done properly in async fault paths. Also lets us remove the delayed
> mmdrop(), saving memory in each user_event_mm struct.
> 
> Fixed timing window where task exits, but write could be in-progress.
> During exit we now take mmap_write_lock to ensure we drain writes.
> 
> V2:
> Rebase to 6.1-rc5.
> 
> Added various comments based on feedback.
> 
> Added enable_size to register struct, allows 32/64 bit addresses
> as long as the enable_bit fits and the address is naturally aligned.
> 
> Changed user_event_enabler_write to accept a new flag indicating if a
> fault fixup should be done or not. This allows user_event_enabler_create
> to return back failures to the user ioctl reg call and retry to fault
> in data.
> 
> Added tracking fork/exec/exit of tasks to have the user_event_mm lifetime
> tied more to the task than the file. This came with extra requirements
> around when you can lock, such as softirq cases, as well as a RCU
> pattern to ensure fork/exec/exit take minimal lock times.
> 
> Changed enablers to use a single word-aligned value for saving the bit
> to set and any flags, such as faulting asyncly or being freed. This was
> required to ensure atomic bit set/test for fork cases where taking the
> event_mutex is not a good scalability decision.
> 
> Added unregister IOCTL, since file lifetime no longer limits the enable
> time for any events (the mm does).
> 
> Updated sample code to reflect the new remote write based ABI.
> 
> Updated self-test code to reflect the new remote write based ABI.
> 
> Beau Belgrave (11):
>   tracing/user_events: Split header into uapi and kernel
>   tracing/user_events: Track fork/exec/exit for mm lifetime
>   tracing/user_events: Use remote writes for event enablement
>   tracing/user_events: Fixup enable faults asyncly
>   tracing/user_events: Add ioctl for disabling addresses
>   tracing/user_events: Update self-tests to write ABI
>   tracing/user_events: Add ABI self-test
>   tracing/user_events: Use write ABI in example
>   tracing/user_events: Update documentation for ABI
>   tracing/user_events: Charge event allocs to cgroups
>   tracing/user_events: Limit global user_event count
> 
>  Documentation/trace/user_events.rst           | 177 ++--
>  fs/exec.c                                     |   2 +
>  include/linux/sched.h                         |   5 +
>  include/linux/user_events.h                   | 101 +-
>  include/uapi/linux/user_events.h              |  81 ++
>  kernel/exit.c                                 |   2 +
>  kernel/fork.c                                 |   2 +
>  kernel/trace/Kconfig                          |   5 +-
>  kernel/trace/trace_events_user.c              | 863 +++++++++++++++---
>  samples/user_events/example.c                 |  47 +-
>  tools/testing/selftests/user_events/Makefile  |   2 +-
>  .../testing/selftests/user_events/abi_test.c  | 226 +++++
>  .../testing/selftests/user_events/dyn_test.c  |   2 +-
>  .../selftests/user_events/ftrace_test.c       | 162 ++--
>  .../testing/selftests/user_events/perf_test.c |  39 +-
>  15 files changed, 1317 insertions(+), 399 deletions(-)
>  create mode 100644 include/uapi/linux/user_events.h
>  create mode 100644 tools/testing/selftests/user_events/abi_test.c
> 
> 
> base-commit: ceaa837f96adb69c0df0397937cd74991d5d821a
> -- 
> 2.25.1
> 


-- 
Masami Hiramatsu (Google) <mhiramat@...nel.org>

Powered by blists - more mailing lists