linux-kernel - [PATCH v3 2/6] iommu/vt-d: Allow SVA with device-specific IOPF

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230324120234.313643-3-baolu.lu@linux.intel.com>
Date:   Fri, 24 Mar 2023 20:02:30 +0800
From:   Lu Baolu <baolu.lu@...ux.intel.com>
To:     iommu@...ts.linux.dev, dmaengine@...r.kernel.org
Cc:     Joerg Roedel <joro@...tes.org>, Will Deacon <will@...nel.org>,
        Robin Murphy <robin.murphy@....com>,
        Kevin Tian <kevin.tian@...el.com>,
        Fenghua Yu <fenghua.yu@...el.com>,
        Dave Jiang <dave.jiang@...el.com>,
        Vinod Koul <vkoul@...nel.org>,
        Jacob Pan <jacob.jun.pan@...ux.intel.com>,
        linux-kernel@...r.kernel.org, Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v3 2/6] iommu/vt-d: Allow SVA with device-specific IOPF

Currently enabling SVA requires IOPF support from the IOMMU and device
PCI PRI. However, some devices can handle IOPF by itself without ever
sending PCI page requests nor advertising PRI capability.

Allow SVA support with IOPF handled either by IOMMU (PCI PRI) or device
driver (device-specific IOPF). As long as IOPF could be handled, SVA
should continue to work.

Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 drivers/iommu/intel/iommu.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 7c2f4bd33582..caf664448ee9 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4650,7 +4650,21 @@ static int intel_iommu_enable_sva(struct device *dev)
 	if (!(iommu->flags & VTD_FLAG_SVM_CAPABLE))
 		return -ENODEV;
 
-	if (!info->pasid_enabled || !info->pri_enabled || !info->ats_enabled)
+	if (!info->pasid_enabled || !info->ats_enabled)
+		return -EINVAL;
+
+	/*
+	 * Devices having device-specific I/O fault handling should not
+	 * support PCI/PRI. The IOMMU side has no means to check the
+	 * capability of device-specific IOPF.  Therefore, IOMMU can only
+	 * default that if the device driver enables SVA on a non-PRI
+	 * device, it will handle IOPF in its own way.
+	 */
+	if (!info->pri_supported)
+		return 0;
+
+	/* Devices supporting PRI should have it enabled. */
+	if (!info->pri_enabled)
 		return -EINVAL;
 
 	ret = iopf_queue_add_device(iommu->iopf_queue, dev);
-- 
2.34.1