| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <967154b6-97a7-0c43-52cc-746274694c18@linaro.org>
Date: Sat, 25 Mar 2023 13:36:45 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Vinod Koul <vkoul@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 11/12] arm64: dts: qcom: sc8180x: Introduce Primus
On 25.03.2023 13:24, Vinod Koul wrote:
> From: Bjorn Andersson <bjorn.andersson@...aro.org>
>
> Introduce support for the SC8180X reference device, aka Primus, with
> debug UART, regulators, UFS and USB support.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
Please introduce PMICs in a separate commit. On top of that,
the previous patch (in a very slim and basic version) should
have been combined with (a very slim and basic version) this
patch so that we don't introduce code that never compiles.
And the patches are missing your (as the sender) S-o-bs.
Please run them through dtbs_check and checkpatch.pl --strict,
I think it should have pointed some of that out.
Konrad
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 326 +++++++++
> arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 706 ++++++++++++++++++++
> 3 files changed, 1033 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-primus.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 31aa54f0428c..fdce44a7a902 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> new file mode 100644
> index 000000000000..49c146b6f37f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> @@ -0,0 +1,326 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2021-2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +
> +/ {
> + thermal-zones {
> + pmc8180-thermal {
> + polling-delay-passive = <100>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&pmc8180_temp>;
> +
> + trips {
> + trip0 {
> + temperature = <95000>;
> + hysteresis = <0>;
> + type = "passive";
> + };
> +
> + trip1 {
> + temperature = <115000>;
> + hysteresis = <0>;
> + type = "hot";
> + };
> +
> + trip2 {
> + temperature = <145000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + };
> +
> + pmc8180c-thermal {
> + polling-delay-passive = <100>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&pmc8180c_temp>;
> +
> + trips {
> + trip0 {
> + temperature = <95000>;
> + hysteresis = <0>;
> + type = "passive";
> + };
> +
> + trip1 {
> + temperature = <115000>;
> + hysteresis = <0>;
> + type = "hot";
> + };
> +
> + trip2 {
> + temperature = <145000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +};
> +
> +&spmi_bus {
> + pmc8180_0: pmic@0 {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0x0 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pon: power-on@800 {
> + compatible = "qcom,pm8916-pon";
> + reg = <0x0800>;
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> +
> + status = "disabled";
> + };
> + };
> +
> + pmc8180_temp: temp-alarm@...0 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> + io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
> + io-channel-names = "thermal";
> + #thermal-sensor-cells = <0>;
> + };
> +
> + pmc8180_adc: adc@...0 {
> + compatible = "qcom,spmi-adc5";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + ref-gnd@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + vref-1p25@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + die-temp@6 {
> + reg = <ADC5_DIE_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "die_temp";
> + };
> + };
> +
> + pmc8180_adc_tm: adc-tm@...0 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + rtc@...0 {
> + compatible = "qcom,pm8941-rtc";
> + reg = <0x6000>;
> + reg-names = "rtc", "alarm";
> + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> + };
> +
> + pmc8180_gpios: gpio@...0 {
> + compatible = "qcom,pmc8180-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pmic@1 {
> + compatible = "qcom,pmc8180", "qcom,spmi-pmic";
> + reg = <0x1 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + pmic@2 {
> + compatible = "qcom,smb2351", "qcom,spmi-pmic";
> + reg = <0x2 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@...0 {
> + compatible = "qcom,spmi-adc-rev2";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + ref-gnd@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + vref-1p25@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + vcoin@85 {
> + reg = <0x85>;
> + qcom,pre-scaling = <1 1>;
> + label = "vcoin2";
> + };
> + };
> + };
> +
> + pmic@6 {
> + compatible = "qcom,pm8150c", "qcom,spmi-pmic";
> + reg = <0x6 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + pmic@8 {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0x8 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + pmic@a {
> + compatible = "qcom,smb2351", "qcom,spmi-pmic";
> + reg = <0xa SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@...0 {
> + compatible = "qcom,spmi-adc-rev2";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + ref-gnd@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + vref-1p25@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + vcoin@85 {
> + reg = <0x85>;
> + qcom,pre-scaling = <1 1>;
> + label = "vcoin";
> + };
> + };
> + };
> +
> + pmic@4 {
> + compatible = "qcom,pm8150c", "qcom,spmi-pmic";
> + reg = <0x4 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-on@800 {
> + compatible = "qcom,pm8916-pon";
> + reg = <0x0800>;
> +
> + status = "disabled";
> + };
> +
> + pmc8180c_temp: temp-alarm@...0 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> + io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
> + io-channel-names = "thermal";
> + #thermal-sensor-cells = <0>;
> + };
> +
> + pmc8180c_adc: adc@...0 {
> + compatible = "qcom,spmi-adc5";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + ref-gnd@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + vref-1p25@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + die-temp@6 {
> + reg = <ADC5_DIE_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "die_temp";
> + };
> + };
> +
> + pmc8180c_adc_tm: adc-tm@...0 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + pmc8180c_gpios: gpio@...0 {
> + compatible = "qcom,pmc8180c-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pmic@5 {
> + compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
> + reg = <0x5 SPMI_USID>;
> +
> + pmc8180c_lpg: lpg {
> + compatible = "qcom,pmc8180c-lpg";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #pwm-cells = <2>;
> +
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> new file mode 100644
> index 000000000000..9f365fccae78
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> @@ -0,0 +1,706 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc8180x.dtsi"
> +#include "sc8180x-pmics.dtsi"
> +
> +/ {
> + model = "Qualcomm SC8180x Primus";
> + compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
> +
> + aliases {
> + serial0 = &uart12;
> + serial1 = &uart13;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pmc8180c_lpg 4 1000000>;
> + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_pwm_default>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&hall_int_active_state>;
> +
> + lid-switch {
> + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + wakeup-source;
> + wakeup-event-action = <EV_ACT_DEASSERTED>;
> + };
> + };
> +
> + reserved-memory {
> + rmtfs_mem: rmtfs-region@...00000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0x85500000 0x0 0x200000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <15>;
> + };
> +
> + wlan_mem: wlan-region@...00000 {
> + reg = <0x0 0x8bc00000 0x0 0x180000>;
> + no-map;
> + };
> +
> + adsp_mem: adsp-region@...00000 {
> + reg = <0x0 0x96e00000 0x0 0x1c00000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss-region@...00000 {
> + reg = <0x0 0x8d800000 0x0 0x9600000>;
> + no-map;
> + };
> +
> + gpu_mem: gpu-region@...00000 {
> + reg = <0x0 0x98a00000 0x0 0x2000>;
> + no-map;
> + };
> +
> + reserved-region@...00000 {
> + reg = <0x0 0x9a500000 0x0 0x600000>;
> + no-map;
> + };
> + };
> +
> + vreg_nvme_0p9: nvme-0p9-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_nvme_0p9";
> +
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-always-on;
> + };
> +
> + vreg_nvme_3p3: nvme-3p3-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_nvme_3p3";
> +
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pmc8180c_gpios 11 0>;
> + enable-active-high;
> +
> + regulator-always-on;
> + };
> +
> + vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_kb_tp_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + regulator-always-on;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kb_tp_3v3_en_active_state>;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> + vreg_s4a_1p8: pm8150-s4 {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s4a_1p8";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +};
> +
> +&apps_rsc {
> + pmc8180-a-rpmh-regulators {
> + compatible = "qcom,pmc8180-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
> +
> + vreg_s5a_2p0: smps5 {
> + regulator-min-microvolt = <2040000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + vreg_l7a_1p8: ldo7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9a_1p3: ldo9 {
> + regulator-min-microvolt = <1296000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pmc8180c-rpmh-regulators {
> + compatible = "qcom,pmc8180c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-l2-l3-supply = <&vreg_s6c_1p35>;
> + vdd-bob-supply = <&vph_pwr>;
> +
> + vreg_s6c_1p35: smps6 {
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1372000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s8c_1p8: smps8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-always-on;
> + };
> +
> + vreg_l3c_1p2: ldo3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_3p3: ldo4 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_3p3: ldo10 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_3p3: ldo11 {
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3350000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pmc8180-e-rpmh-regulators {
> + compatible = "qcom,pmc8180-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-l2-l10-supply = <&vreg_bob>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
> + vdd-l13-l16-l17-supply = <&vreg_bob>;
> +
> + vreg_s4e_0p98: smps4 {
> + regulator-min-microvolt = <992000>;
> + regulator-max-microvolt = <992000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5e_2p05: smps5 {
> + regulator-min-microvolt = <2040000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1e_0p75: ldo1 {
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <752000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5e_0p88: ldo5 {
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7e_1p8: ldo7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10e_2p9: ldo10 {
> + regulator-min-microvolt = <2904000>;
> + regulator-max-microvolt = <2904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12e: ldo12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16e_3p0: ldo16 {
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&dispcc {
> + status = "okay";
> +};
> +
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + memory-region = <&gpu_mem>;
> + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts_i2c_active_state>;
> +
> + status = "okay";
> +
> + touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + hid-descr-addr = <0x1>;
> +
> + vdd-supply = <&vreg_l4c_3p3>;
> + vddl-supply = <&vreg_l12e>;
> +
> + post-power-on-delay-ms = <20>;
> +
> + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts_active_state>;
> + };
> +};
> +
> +&i2c7 {
> + clock-frequency = <100000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&aux_i2c_active_state>;
> +
> + status = "okay";
> +
> + touchpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> + hid-descr-addr = <0x1>;
> +
> + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tp_int_active_state>;
> +
> + vdd-supply = <&vdd_kb_tp_3v3>;
> + };
> +
> + keyboard@3a {
> + compatible = "hid-over-i2c";
> + reg = <0x3a>;
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kb_int_active_state>;
> +
> + vdd-supply = <&vdd_kb_tp_3v3>;
> + };
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_edp {
> + data-lanes = <0 1 2 3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_hpd_active>;
> +
> + status = "okay";
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> +
> + backlight = <&backlight>;
> +
> + ports {
> + port {
> + auo_b133han05_in: endpoint {
> + remote-endpoint = <&mdss_edp_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> + mdss_edp_out: endpoint {
> + remote-endpoint = <&auo_b133han05_in>;
> + };
> + };
> + };
> +};
> +
> +&pcie1 {
> + perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
> + wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie2_default_state>;
> +
> + status = "okay";
> +};
> +
> +&pcie1_phy {
> + vdda-phy-supply = <&vreg_l5e_0p88>;
> + vdda-pll-supply = <&vreg_l3c_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pmc8180c_lpg {
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&qupv3_id_2 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + memory-region = <&adsp_mem>;
> + firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
> +
> + status = "okay";
> +};
> +
> +&remoteproc_mpss {
> + memory-region = <&mpss_mem>;
> + firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
> +
> + status = "okay";
> +};
> +
> +&uart12 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> +
> +&uart13 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart13_state>;
> +
> + status = "okay";
> +
> + bluetooth {
> + compatible = "qcom,wcn3998-bt";
> +
> + vddio-supply = <&vreg_s4a_1p8>;
> + vddxo-supply = <&vreg_l7a_1p8>;
> + vddrf-supply = <&vreg_l9a_1p3>;
> + vddch0-supply = <&vreg_l11c_3p3>;
> + max-speed = <3200000>;
> + };
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l10e_2p9>;
> + vcc-max-microamp = <155000>;
> +
> + vccq2-supply = <&vreg_l7e_1p8>;
> + vccq2-max-microamp = <425000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l5e_0p88>;
> + vdda-pll-supply = <&vreg_l3c_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_prim_hsphy {
> + vdda-pll-supply = <&vreg_l5e_0p88>;
> + vdda18-supply = <&vreg_l12a_1p8>;
> + vdda33-supply = <&vreg_l16e_3p0>;
> +
> + status = "okay";
> +};
> +
> +&usb_prim_qmpphy {
> + vdda-phy-supply = <&vreg_l3c_1p2>;
> + vdda-pll-supply = <&vreg_l5e_0p88>;
> +
> + status = "okay";
> +};
> +
> +&usb_prim {
> + status = "okay";
> +};
> +
> +&usb_prim_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_sec_hsphy {
> + vdda-pll-supply = <&vreg_l5e_0p88>;
> + vdda18-supply = <&vreg_l12a_1p8>;
> + vdda33-supply = <&vreg_l16e_3p0>;
> +
> + status = "okay";
> +};
> +
> +&usb_sec_qmpphy {
> + vdda-phy-supply = <&vreg_l3c_1p2>;
> + vdda-pll-supply = <&vreg_l5e_0p88>;
> +
> + status = "okay";
> +};
> +
> +&usb_sec {
> + status = "okay";
> +};
> +
> +&usb_sec_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&wifi {
> + memory-region = <&wlan_mem>;
> +
> + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
> + vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
> + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
> + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
> +
> + status = "okay";
> +};
> +
> +&xo_board_clk {
> + clock-frequency = <38400000>;
> +};
> +
> +/* PINCTRL */
> +
> +&pmc8180c_gpios {
> + bl_pwm_default: bl-pwm-default-state {
> + en-pins {
> + pins = "gpio8";
> + function = "normal";
> + };
> +
> + pwm-pins {
> + pins = "gpio10";
> + function = "func1";
> + };
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
> +
> + aux_i2c_active_state: aux-i2c-active-state {
> + pins = "gpio98", "gpio99";
> + function = "qup7";
> +
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + edp_hpd_active: epd-hpd-active-state {
> + pins = "gpio10";
> + function = "edp_hot";
> + };
> +
> + hall_int_active_state: hall-int-active-state {
> + pins = "gpio121";
> + function = "gpio";
> +
> + input-enable;
> + bias-disable;
> + };
> +
> + kb_int_active_state: kb-int-active-state {
> + int-n-pins {
> + pins = "gpio37";
> + function = "gpio";
> +
> + bias-pull-up;
> + intput-enable;
> + };
> +
> + kp-disable-pins {
> + pins = "gpio135";
> + function = "gpio";
> +
> + output-high;
> + };
> + };
> +
> + kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
> + pins = "gpio4";
> + functino = "gpio";
> +
> + bias-disable;
> + };
> +
> + pcie2_default_state: pcie2-default-state {
> + clkreq-pins {
> + pins = "gpio176";
> + function = "pci_e2";
> + bias-pull-up;
> + };
> +
> + reset-n-pins {
> + pins = "gpio175";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + output-low;
> + bias-pull-down;
> + };
> +
> + wake-n-pins {
> + pins = "gpio177";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + tp_int_active_state: tp-int-active-state {
> + tp-int-pins {
> + pins = "gpio24";
> + function = "gpio";
> +
> + bias-disable;
> + input-enable;
> + };
> +
> + tp-close-n-pins {
> + pins = "gpio116";
> + function = "gpio";
> +
> + bias-disable;
> + input-enable;
> + };
> + };
> +
> + ts_active_state: ts-active-state {
> + int-n-pins {
> + pins = "gpio122";
> + function = "gpio";
> +
> + input-enable;
> + bias-disable;
> + };
> +
> + reset-n-pins {
> + pins = "gpio54";
> + function = "gpio";
> +
> + output-high;
> + };
> + };
> +
> + ts_i2c_active_state: ts-i2c-active-state {
> + pins = "gpio114", "gpio115";
> + function = "qup1";
> +
> + /* External pull up */
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + uart13_state: uart13-state {
> + cts-pins {
> + pins = "gpio43";
> + function = "qup13";
> + bias-pull-down;
> + };
> +
> + rts-tx-pins {
> + pins = "gpio44", "gpio45";
> + function = "qup13";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + rx-pins {
> + pins = "gpio46";
> + function = "qup13";
> + bias-pull-up;
> + };
> + };
> +};
Powered by blists - more mailing lists