[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230326160325.3771891-5-dario.binacchi@amarulasolutions.com>
Date: Sun, 26 Mar 2023 18:03:24 +0200
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: Amarula patchwork <linux-amarula@...rulasolutions.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Marc Kleine-Budde <mkl@...gutronix.de>,
michael@...rulasolutions.com,
Vincent Mailhol <mailhol.vincent@...adoo.fr>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Dario Binacchi <dario.binacchi@...rulasolutions.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v8 4/5] ARM: dts: stm32: add pin map for CAN controller on stm32f4
Add pin configurations for using CAN controller on stm32f469-disco
board. They are located on the Arduino compatible connector CN5 (CAN1)
and on the extension connector CN12 (CAN2).
Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
---
(no changes since v3)
Changes in v3:
- Remove 'Dario Binacchi <dariobin@...ero.it>' SOB.
- Remove a blank line.
Changes in v2:
- Remove a blank line.
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 30 ++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 4523c63475e4..3bb812d6399e 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -447,6 +447,36 @@ pins2 {
slew-rate = <2>;
};
};
+
+ can1_pins_a: can1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+ bias-pull-up;
+ };
+ };
+
+ can2_pins_a: can2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+ bias-pull-up;
+ };
+ };
+
+ can2_pins_b: can2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+ bias-pull-up;
+ };
+ };
};
};
};
--
2.32.0
Powered by blists - more mailing lists