| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM6PR04MB4838C84574BE534DDB0428D0888B9@AM6PR04MB4838.eurprd04.prod.outlook.com>
Date: Mon, 27 Mar 2023 15:29:54 +0000
From: Frank Li <frank.li@....com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
"lpieralisi@...nel.org" <lpieralisi@...nel.org>,
"kw@...ux.com" <kw@...ux.com>, "robh@...nel.org" <robh@...nel.org>
CC: "andersson@...nel.org" <andersson@...nel.org>,
"konrad.dybcio@...aro.org" <konrad.dybcio@...aro.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"quic_krichai@...cinc.com" <quic_krichai@...cinc.com>,
"johan+linaro@...nel.org" <johan+linaro@...nel.org>,
"steev@...i.org" <steev@...i.org>,
"mka@...omium.org" <mka@...omium.org>, Dhruva Gole <d-gole@...com>
Subject: RE: [EXT] [PATCH v3 1/1] PCI: qcom: Add support for system suspend
and resume
> -----Original Message-----
> From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> Sent: Monday, March 27, 2023 8:38 AM
> To: lpieralisi@...nel.org; kw@...ux.com; robh@...nel.org
> Cc: andersson@...nel.org; konrad.dybcio@...aro.org;
> bhelgaas@...gle.com; linux-pci@...r.kernel.org; linux-arm-
> msm@...r.kernel.org; linux-kernel@...r.kernel.org;
> quic_krichai@...cinc.com; johan+linaro@...nel.org; steev@...i.org;
> mka@...omium.org; Manivannan Sadhasivam
> <manivannan.sadhasivam@...aro.org>; Dhruva Gole <d-gole@...com>
> Subject: [EXT] [PATCH v3 1/1] PCI: qcom: Add support for system suspend
> and resume
>
> Caution: EXT Email
>
> During the system suspend, vote for minimal interconnect bandwidth and
> also turn OFF the resources like clock and PHY if there are no active
> devices connected to the controller. For the controllers with active
> devices, the resources are kept ON as removing the resources will
> trigger access violation during the late end of suspend cycle as kernel
> tries to access the config space of PCIe devices to mask the MSIs.
I remember I met similar problem before. It is relate ASPM settings of NVME.
NVME try to use L1.2 at suspend to save restore time.
It should be user decided if PCI enter L1.2( for better resume time) or L2
For batter power saving. If NVME disable ASPM, NVME driver will free
Msi irq before enter suspend, so not issue access config space by MSI
Irq disable function.
This is just general comment. It is not specific for this patches. Many platform
Will face the similar problem. Maybe need better solution to handle
L2/L3 for better power saving in future.
Frank Li
>
> Also, it is not desirable to put the link into L2/L3 state as that
> implies VDD supply will be removed and the devices may go into powerdown
> state. This will affect the lifetime of storage devices like NVMe.
>
> And finally, during resume, turn ON the resources if the controller was
> truly suspended (resources OFF) and update the interconnect bandwidth
> based on PCIe Gen speed.
>
> Suggested-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
> Acked-by: Dhruva Gole <d-gole@...com>
> Signed-off-by: Manivannan Sadhasivam
> <manivannan.sadhasivam@...aro.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 62 ++++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> b/drivers/pci/controller/dwc/pcie-qcom.c
> index a232b04af048..f33df536d9be 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -227,6 +227,7 @@ struct qcom_pcie {
> struct gpio_desc *reset;
> struct icc_path *icc_mem;
> const struct qcom_pcie_cfg *cfg;
> + bool suspended;
> };
>
> #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
> @@ -1820,6 +1821,62 @@ static int qcom_pcie_probe(struct
> platform_device *pdev)
> return ret;
> }
>
> +static int qcom_pcie_suspend_noirq(struct device *dev)
> +{
> + struct qcom_pcie *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + /*
> + * Set minimum bandwidth required to keep data path functional during
> + * suspend.
> + */
> + ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250));
> + if (ret) {
> + dev_err(dev, "Failed to set interconnect bandwidth: %d\n", ret);
> + return ret;
> + }
> +
> + /*
> + * Turn OFF the resources only for controllers without active PCIe
> + * devices. For controllers with active devices, the resources are kept
> + * ON and the link is expected to be in L0/L1 (sub)states.
> + *
> + * Turning OFF the resources for controllers with active PCIe devices
> + * will trigger access violation during the end of the suspend cycle,
> + * as kernel tries to access the PCIe devices config space for masking
> + * MSIs.
> + *
> + * Also, it is not desirable to put the link into L2/L3 state as that
> + * implies VDD supply will be removed and the devices may go into
> + * powerdown state. This will affect the lifetime of the storage devices
> + * like NVMe.
> + */
> + if (!dw_pcie_link_up(pcie->pci)) {
> + qcom_pcie_host_deinit(&pcie->pci->pp);
> + pcie->suspended = true;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_pcie_resume_noirq(struct device *dev)
> +{
> + struct qcom_pcie *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + if (pcie->suspended) {
> + ret = qcom_pcie_host_init(&pcie->pci->pp);
> + if (ret)
> + return ret;
> +
> + pcie->suspended = false;
> + }
> +
> + qcom_pcie_icc_update(pcie);
> +
> + return 0;
> +}
> +
> static const struct of_device_id qcom_pcie_match[] = {
> { .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
> { .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
> @@ -1856,12 +1913,17 @@
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302,
> qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000,
> qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001,
> qcom_fixup_class);
>
> +static const struct dev_pm_ops qcom_pcie_pm_ops = {
> + NOIRQ_SYSTEM_SLEEP_PM_OPS(qcom_pcie_suspend_noirq,
> qcom_pcie_resume_noirq)
> +};
> +
> static struct platform_driver qcom_pcie_driver = {
> .probe = qcom_pcie_probe,
> .driver = {
> .name = "qcom-pcie",
> .suppress_bind_attrs = true,
> .of_match_table = qcom_pcie_match,
> + .pm = &qcom_pcie_pm_ops,
> },
> };
> builtin_platform_driver(qcom_pcie_driver);
> --
> 2.25.1
Powered by blists - more mailing lists