| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230327153943.275124-4-valentin.caron@foss.st.com>
Date: Mon, 27 Mar 2023 17:39:41 +0200
From: Valentin Caron <valentin.caron@...s.st.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>
CC: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 5/7] ARM: dts: stm32: add uart nodes on stm32mp13
Update device-tree stm32mp131.dtsi to add some uart features.
On uart 1, 2, 3, 5, 6, 7, 8 nodes, add compabible, exti interrupts, clock,
reset properties, dma config.
On uart 4 node, only add dma configuration and use exti interrupt.
Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
arch/arm/boot/dts/stm32mp131.dtsi | 97 ++++++++++++++++++++++++++++++-
1 file changed, 96 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 5949473cbbfd..9ea61687f023 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@ spdifrx: audio-controller@...0d000 {
status = "disabled";
};
+ usart3: serial@...0f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ resets = <&rcc USART3_R>;
+ wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x5>,
+ <&dmamux1 46 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
uart4: serial@...10000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>;
resets = <&rcc UART4_R>;
+ wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x5>,
+ <&dmamux1 64 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart5: serial@...11000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ resets = <&rcc UART5_R>;
+ wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x5>,
+ <&dmamux1 66 0x400 0x1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -442,6 +472,32 @@ i2c2: i2c@...13000 {
status = "disabled";
};
+ uart7: serial@...18000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ resets = <&rcc UART7_R>;
+ wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x5>,
+ <&dmamux1 80 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart8: serial@...19000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ resets = <&rcc UART8_R>;
+ wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x5>,
+ <&dmamux1 82 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
timers1: timer@...00000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -524,6 +580,19 @@ counter {
};
};
+ usart6: serial@...03000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ resets = <&rcc USART6_R>;
+ wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x5>,
+ <&dmamux1 72 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s1: audio-controller@...04000 {
compatible = "st,stm32h7-i2s";
reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@ usbotg_hs: usb@...00000 {
status = "disabled";
};
+ usart1: serial@...00000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usart2: serial@...01000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
i2s4: audio-controller@...02000 {
compatible = "st,stm32h7-i2s";
reg = <0x4c002000 0x400>;
--
2.25.1
Powered by blists - more mailing lists