linux-kernel - [PATCH 7/7] ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230327153943.275124-6-valentin.caron@foss.st.com>
Date:   Mon, 27 Mar 2023 17:39:43 +0200
From:   Valentin Caron <valentin.caron@...s.st.com>
To:     Alexandre Torgue <alexandre.torgue@...s.st.com>
CC:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH 7/7] ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk

Update device-tree stm32mp135f-dk.dts to add usart1, uart8, usart2
and uart aliases.

- Usart2 is used to interface a BT device, enable it by default.
- Usart1 and uart8 are available on expansion connector.
  They are kept disabled. So, the pins are kept in analog state to
  lower power consumption by default or can be used as GPIO.
- Uart4 is used for console.

Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
 arch/arm/boot/dts/stm32mp135f-dk.dts | 42 +++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index c40686cb2b9a..f0900ca672b5 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -19,6 +19,13 @@ / {
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@...00000 {
@@ -267,8 +274,41 @@ timer@13 {
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
-- 
2.25.1