linux-kernel - Re: [bugzilla-daemon@...nel.org: [Bug 217251] New: pciehp: nvme not visible after re-insert to tbt port]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 27 Mar 2023 10:18:50 -0600
From:   Keith Busch <kbusch@...nel.org>
To:     Bjorn Helgaas <helgaas@...nel.org>
Cc:     Jens Axboe <axboe@...com>, Christoph Hellwig <hch@....de>,
        Sagi Grimberg <sagi@...mberg.me>,
        Lukas Wunner <lukas@...ner.de>,
        Aleksander Trofimowicz <alex@....eu>,
        linux-pci@...r.kernel.org, linux-nvme@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [bugzilla-daemon@...nel.org: [Bug 217251] New: pciehp: nvme not
 visible after re-insert to tbt port]

On Mon, Mar 27, 2023 at 09:33:59AM -0500, Bjorn Helgaas wrote:
> Forwarding to NVMe folks, lists for visibility.
> 
> ----- Forwarded message from bugzilla-daemon@...nel.org -----
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=217251
> ...
> 
> Created attachment 304031
>   --> https://bugzilla.kernel.org/attachment.cgi?id=304031&action=edit
> the tracing of nvme_pci_enable() during re-insertion
> 
> Hi,
> 
> There is a JHL7540-based device that may host a NVMe device. After the first
> insertion a nvme drive is properly discovered and handled by the relevant
> modules. Once disconnected any further attempts are not successful. The device
> is visible on a PCI bus, but nvme_pci_enable() ends up calling
> pci_disable_device() every time; the runtime PM status of the device is
> "suspended", the power status of the 04:01.0 PCI bridge is D3. Preventing the
> device from being power managed ("on" -> /sys/devices/../power/control)
> combined with device removal and pci rescan changes nothing. A host reboot
> restores the initial state.
> 
> I would appreciate any suggestions how to debug it further.

Sounds the same as this report:

  http://lists.infradead.org/pipermail/linux-nvme/2023-March/038259.html

The driver is bailing on the device because we can't read it's status register
out of the remapped BAR. There's nothing we can do about that from the nvme
driver level. Memory mapped IO has to work in order to proceed.