| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230327205841.GA3158115@p14s>
Date: Mon, 27 Mar 2023 14:58:41 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: MD Danish Anwar <danishanwar@...com>
Cc: "Andrew F. Davis" <afd@...com>, Suman Anna <s-anna@...com>,
Roger Quadros <rogerq@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Nishanth Menon <nm@...com>, linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, srk@...com, devicetree@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
Hi Danish
On Thu, Mar 23, 2023 at 11:54:47AM +0530, MD Danish Anwar wrote:
> From: Tero Kristo <t-kristo@...com>
>
> Add two new get and put API, pruss_get() and pruss_put() to the
> PRUSS platform driver to allow client drivers to request a handle
> to a PRUSS device. This handle will be used by client drivers to
> request various operations of the PRUSS platform driver through
> additional API that will be added in the following patches.
>
> The pruss_get() function returns the pruss handle corresponding
> to a PRUSS device referenced by a PRU remoteproc instance. The
> pruss_put() is the complimentary function to pruss_get().
>
> Co-developed-by: Suman Anna <s-anna@...com>
> Signed-off-by: Suman Anna <s-anna@...com>
> Signed-off-by: Tero Kristo <t-kristo@...com>
> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
> Signed-off-by: Puranjay Mohan <p-mohan@...com>
> Signed-off-by: MD Danish Anwar <danishanwar@...com>
> Reviewed-by: Roger Quadros <rogerq@...nel.org>
> ---
> drivers/remoteproc/pru_rproc.c | 2 +-
> drivers/soc/ti/pruss.c | 60 ++++++++++++++++++-
> .../{pruss_driver.h => pruss_internal.h} | 7 ++-
> include/linux/remoteproc/pruss.h | 19 ++++++
> 4 files changed, 83 insertions(+), 5 deletions(-)
> rename include/linux/{pruss_driver.h => pruss_internal.h} (90%)
>
> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index b76db7fa693d..4ddd5854d56e 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -19,7 +19,7 @@
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/remoteproc/pruss.h>
> -#include <linux/pruss_driver.h>
> +#include <linux/pruss_internal.h>
> #include <linux/remoteproc.h>
>
> #include "remoteproc_internal.h"
> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
> index 6882c86b3ce5..6c2bb02a521d 100644
> --- a/drivers/soc/ti/pruss.c
> +++ b/drivers/soc/ti/pruss.c
> @@ -6,6 +6,7 @@
> * Author(s):
> * Suman Anna <s-anna@...com>
> * Andrew F. Davis <afd@...com>
> + * Tero Kristo <t-kristo@...com>
> */
>
> #include <linux/clk-provider.h>
> @@ -16,8 +17,9 @@
> #include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> -#include <linux/pruss_driver.h>
> +#include <linux/pruss_internal.h>
> #include <linux/regmap.h>
> +#include <linux/remoteproc.h>
> #include <linux/slab.h>
>
> /**
> @@ -30,6 +32,62 @@ struct pruss_private_data {
> bool has_core_mux_clock;
> };
>
> +/**
> + * pruss_get() - get the pruss for a given PRU remoteproc
> + * @rproc: remoteproc handle of a PRU instance
> + *
> + * Finds the parent pruss device for a PRU given the @rproc handle of the
> + * PRU remote processor. This function increments the pruss device's refcount,
> + * so always use pruss_put() to decrement it back once pruss isn't needed
> + * anymore.
> + *
> + * Return: pruss handle on success, and an ERR_PTR on failure using one
> + * of the following error values
> + * -EINVAL if invalid parameter
> + * -ENODEV if PRU device or PRUSS device is not found
> + */
> +struct pruss *pruss_get(struct rproc *rproc)
> +{
> + struct pruss *pruss;
> + struct device *dev;
> + struct platform_device *ppdev;
> +
> + if (IS_ERR_OR_NULL(rproc))
> + return ERR_PTR(-EINVAL);
> +
There is no guarantee that @rproc is valid without calling rproc_get_by_handle()
or pru_rproc_get().
> + dev = &rproc->dev;
> +
> + /* make sure it is PRU rproc */
> + if (!dev->parent || !is_pru_rproc(dev->parent))
> + return ERR_PTR(-ENODEV);
> +
> + ppdev = to_platform_device(dev->parent->parent);
> + pruss = platform_get_drvdata(ppdev);
> + if (!pruss)
> + return ERR_PTR(-ENODEV);
> +
> + get_device(pruss->dev);
> +
> + return pruss;
> +}
> +EXPORT_SYMBOL_GPL(pruss_get);
> +
> +/**
> + * pruss_put() - decrement pruss device's usecount
> + * @pruss: pruss handle
> + *
> + * Complimentary function for pruss_get(). Needs to be called
> + * after the PRUSS is used, and only if the pruss_get() succeeds.
> + */
> +void pruss_put(struct pruss *pruss)
> +{
> + if (IS_ERR_OR_NULL(pruss))
> + return;
> +
> + put_device(pruss->dev);
> +}
> +EXPORT_SYMBOL_GPL(pruss_put);
> +
> static void pruss_of_free_clk_provider(void *data)
> {
> struct device_node *clk_mux_np = data;
> diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_internal.h
> similarity index 90%
> rename from include/linux/pruss_driver.h
> rename to include/linux/pruss_internal.h
> index ecfded30ed05..8f91cb164054 100644
> --- a/include/linux/pruss_driver.h
> +++ b/include/linux/pruss_internal.h
> @@ -6,9 +6,10 @@
> * Suman Anna <s-anna@...com>
> */
>
> -#ifndef _PRUSS_DRIVER_H_
> -#define _PRUSS_DRIVER_H_
> +#ifndef _PRUSS_INTERNAL_H_
> +#define _PRUSS_INTERNAL_H_
>
> +#include <linux/remoteproc/pruss.h>
> #include <linux/types.h>
>
> /*
> @@ -51,4 +52,4 @@ struct pruss {
> struct clk *iep_clk_mux;
> };
>
> -#endif /* _PRUSS_DRIVER_H_ */
> +#endif /* _PRUSS_INTERNAL_H_ */
> diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
> index 039b50d58df2..93a98cac7829 100644
> --- a/include/linux/remoteproc/pruss.h
> +++ b/include/linux/remoteproc/pruss.h
> @@ -4,12 +4,14 @@
> *
> * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
> * Suman Anna <s-anna@...com>
> + * Tero Kristo <t-kristo@...com>
> */
>
> #ifndef __LINUX_PRUSS_H
> #define __LINUX_PRUSS_H
>
> #include <linux/device.h>
> +#include <linux/err.h>
> #include <linux/types.h>
>
> #define PRU_RPROC_DRVNAME "pru-rproc"
> @@ -44,6 +46,23 @@ enum pru_ctable_idx {
>
> struct device_node;
> struct rproc;
> +struct pruss;
> +
> +#if IS_ENABLED(CONFIG_TI_PRUSS)
> +
> +struct pruss *pruss_get(struct rproc *rproc);
> +void pruss_put(struct pruss *pruss);
> +
> +#else
> +
> +static inline struct pruss *pruss_get(struct rproc *rproc)
> +{
> + return ERR_PTR(-EOPNOTSUPP);
> +}
> +
> +static inline void pruss_put(struct pruss *pruss) { }
> +
> +#endif /* CONFIG_TI_PRUSS */
>
> #if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
>
> --
> 2.25.1
>
Powered by blists - more mailing lists