lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230327075838.5403-30-xin3.li@intel.com> Date: Mon, 27 Mar 2023 00:58:34 -0700 From: Xin Li <xin3.li@...el.com> To: linux-kernel@...r.kernel.org, x86@...nel.org, kvm@...r.kernel.org Cc: tglx@...utronix.de, mingo@...hat.com, bp@...en8.de, dave.hansen@...ux.intel.com, hpa@...or.com, peterz@...radead.org, andrew.cooper3@...rix.com, seanjc@...gle.com, pbonzini@...hat.com, ravi.v.shankar@...el.com, jiangshanlai@...il.com, shan.kang@...el.com Subject: [PATCH v6 29/33] x86/fred: allow FRED systems to use interrupt vectors 0x10-0x1f From: "H. Peter Anvin (Intel)" <hpa@...or.com> FRED inherits the Intel VT-x enhancement of classified events with a two-level event dispatch logic. The first-level dispatch is on the event type, and the second-level is on the event vector. This also means that vectors in different event types are orthogonal, thus, vectors 0x10-0x1f become available as hardware interrupts. Enable interrupt vectors 0x10-0x1f on FRED systems (interrupt 0x80 is already enabled.) Most of these changes are about removing the assumption that the lowest-priority vector is hard-wired to 0x20. Signed-off-by: H. Peter Anvin (Intel) <hpa@...or.com> Tested-by: Shan Kang <shan.kang@...el.com> Signed-off-by: Xin Li <xin3.li@...el.com> --- arch/x86/include/asm/idtentry.h | 4 ++-- arch/x86/include/asm/irq.h | 5 +++++ arch/x86/include/asm/irq_vectors.h | 15 +++++++++++---- arch/x86/kernel/apic/apic.c | 11 ++++++++--- arch/x86/kernel/apic/vector.c | 8 +++++++- arch/x86/kernel/fred.c | 4 ++-- arch/x86/kernel/idt.c | 6 +++--- arch/x86/kernel/irq.c | 2 +- arch/x86/kernel/traps.c | 2 ++ 9 files changed, 41 insertions(+), 16 deletions(-) diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h index bd43866f9c3e..57c891148b59 100644 --- a/arch/x86/include/asm/idtentry.h +++ b/arch/x86/include/asm/idtentry.h @@ -546,8 +546,8 @@ __visible noinstr void func(struct pt_regs *regs, \ */ .align IDT_ALIGN SYM_CODE_START(irq_entries_start) - vector=FIRST_EXTERNAL_VECTOR - .rept NR_EXTERNAL_VECTORS + vector=FIRST_EXTERNAL_VECTOR_IDT + .rept FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR_IDT UNWIND_HINT_IRET_REGS 0 : ENDBR diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index 768aa234cbb4..e4be6f8409ad 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -11,6 +11,11 @@ #include <asm/apicdef.h> #include <asm/irq_vectors.h> +/* + * The first available IRQ vector + */ +extern unsigned int __ro_after_init first_external_vector; + /* * The irq entry code is in the noinstr section and the start/end of * __irqentry_text is emitted via labels. Make the build fail if diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 43dcb9284208..cb3670a7c18f 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -31,15 +31,23 @@ /* * IDT vectors usable for external interrupt sources start at 0x20. - * (0x80 is the syscall vector, 0x30-0x3f are for ISA) + * (0x80 is the syscall vector, 0x30-0x3f are for ISA). + * + * With FRED we can also use 0x10-0x1f even though those overlap + * exception vectors as FRED distinguishes exceptions and interrupts. + * Therefore, FIRST_EXTERNAL_VECTOR is no longer a constant. */ -#define FIRST_EXTERNAL_VECTOR 0x20 +#define FIRST_EXTERNAL_VECTOR_IDT 0x20 +#define FIRST_EXTERNAL_VECTOR_FRED 0x10 +#define FIRST_EXTERNAL_VECTOR first_external_vector /* * Reserve the lowest usable vector (and hence lowest priority) 0x20 for * triggering cleanup after irq migration. 0x21-0x2f will still be used * for device interrupts. */ +#define IRQ_MOVE_CLEANUP_VECTOR_IDT FIRST_EXTERNAL_VECTOR_IDT +#define IRQ_MOVE_CLEANUP_VECTOR_FRED FIRST_EXTERNAL_VECTOR_FRED #define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR #define IA32_SYSCALL_VECTOR 0x80 @@ -48,7 +56,7 @@ * Vectors 0x30-0x3f are used for ISA interrupts. * round up to the next 16-vector boundary */ -#define ISA_IRQ_VECTOR(irq) (((FIRST_EXTERNAL_VECTOR + 16) & ~15) + irq) +#define ISA_IRQ_VECTOR(irq) (((FIRST_EXTERNAL_VECTOR_IDT + 16) & ~15) + irq) /* * Special IRQ vectors used by the SMP architecture, 0xf0-0xff @@ -114,7 +122,6 @@ #define FIRST_SYSTEM_VECTOR NR_VECTORS #endif -#define NR_EXTERNAL_VECTORS (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) #define NR_SYSTEM_VECTORS (NR_VECTORS - FIRST_SYSTEM_VECTOR) /* diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 20d9a604da7c..eef67f64aa81 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1621,12 +1621,17 @@ static void setup_local_APIC(void) /* * Set Task Priority to 'accept all except vectors 0-31'. An APIC * vector in the 16-31 range could be delivered if TPR == 0, but we - * would think it's an exception and terrible things will happen. We - * never change this later on. + * would think it's an exception and terrible things will happen, + * unless we are using FRED in which case interrupts and + * exceptions are distinguished by type code. + * + * We never change this later on. */ + BUG_ON(!first_external_vector); + value = apic_read(APIC_TASKPRI); value &= ~APIC_TPRI_MASK; - value |= 0x10; + value |= (first_external_vector - 0x10) & APIC_TPRI_MASK; apic_write(APIC_TASKPRI, value); /* Clear eventually stale ISR/IRR bits */ diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index c1efebd27e6c..f4325445fd78 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -46,6 +46,7 @@ static struct irq_matrix *vector_matrix; #ifdef CONFIG_SMP static DEFINE_PER_CPU(struct hlist_head, cleanup_list); #endif +unsigned int first_external_vector = FIRST_EXTERNAL_VECTOR_IDT; void lock_vector_lock(void) { @@ -796,7 +797,12 @@ int __init arch_early_irq_init(void) * Allocate the vector matrix allocator data structure and limit the * search area. */ - vector_matrix = irq_alloc_matrix(NR_VECTORS, FIRST_EXTERNAL_VECTOR, + if (cpu_feature_enabled(X86_FEATURE_FRED)) + first_external_vector = FIRST_EXTERNAL_VECTOR_FRED; + else + first_external_vector = FIRST_EXTERNAL_VECTOR_IDT; + + vector_matrix = irq_alloc_matrix(NR_VECTORS, first_external_vector, FIRST_SYSTEM_VECTOR); BUG_ON(!vector_matrix); diff --git a/arch/x86/kernel/fred.c b/arch/x86/kernel/fred.c index 5b4272235f2e..a3b678667b07 100644 --- a/arch/x86/kernel/fred.c +++ b/arch/x86/kernel/fred.c @@ -64,7 +64,7 @@ void __init fred_setup_apic(void) { int i; - for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) + for (i = 0; i < FIRST_EXTERNAL_VECTOR_FRED; i++) set_bit(i, system_vectors); /* @@ -73,7 +73,7 @@ void __init fred_setup_apic(void) * /proc/interrupts. */ #ifdef CONFIG_SMP - set_bit(IRQ_MOVE_CLEANUP_VECTOR, system_vectors); + set_bit(IRQ_MOVE_CLEANUP_VECTOR_FRED, system_vectors); #endif for (i = 0; i < NR_SYSTEM_VECTORS; i++) { diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c index a58c6bc1cd68..d3fd86f85de9 100644 --- a/arch/x86/kernel/idt.c +++ b/arch/x86/kernel/idt.c @@ -131,7 +131,7 @@ static const __initconst struct idt_data apic_idts[] = { INTG(RESCHEDULE_VECTOR, asm_sysvec_reschedule_ipi), INTG(CALL_FUNCTION_VECTOR, asm_sysvec_call_function), INTG(CALL_FUNCTION_SINGLE_VECTOR, asm_sysvec_call_function_single), - INTG(IRQ_MOVE_CLEANUP_VECTOR, asm_sysvec_irq_move_cleanup), + INTG(IRQ_MOVE_CLEANUP_VECTOR_IDT, asm_sysvec_irq_move_cleanup), INTG(REBOOT_VECTOR, asm_sysvec_reboot), #endif @@ -274,13 +274,13 @@ static void __init idt_map_in_cea(void) */ void __init idt_setup_apic_and_irq_gates(void) { - int i = FIRST_EXTERNAL_VECTOR; + int i = FIRST_EXTERNAL_VECTOR_IDT; void *entry; idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true); for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) { - entry = irq_entries_start + IDT_ALIGN * (i - FIRST_EXTERNAL_VECTOR); + entry = irq_entries_start + IDT_ALIGN * (i - FIRST_EXTERNAL_VECTOR_IDT); set_intr_gate(i, entry); } diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7e125fff45ab..b7511e02959c 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -359,7 +359,7 @@ void fixup_irqs(void) * vector_lock because the cpu is already marked !online, so * nothing else will touch it. */ - for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { + for (vector = first_external_vector; vector < NR_VECTORS; vector++) { if (IS_ERR_OR_NULL(__this_cpu_read(vector_irq[vector]))) continue; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index ecfaf4d647bb..73471053ed02 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -1489,6 +1489,8 @@ DEFINE_IDTENTRY_IRQ(spurious_interrupt) pr_info("Spurious interrupt (vector 0x%x) on CPU#%d, should never happen.\n", vector, smp_processor_id()); } + +unsigned int first_external_vector = FIRST_EXTERNAL_VECTOR_IDT; #endif static void dispatch_table_spurious_interrupt(struct pt_regs *regs) -- 2.34.1
Powered by blists - more mailing lists