[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPVz0n1AaTzdwmfkxaUX5peAiQ2K73aoqKfLUy1jwEE6__uG2w@mail.gmail.com>
Date: Mon, 27 Mar 2023 11:37:05 +0300
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Charles Keepax <ckeepax@...nsource.cirrus.com>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Maxim Schwalm <maxim.schwalm@...il.com>,
Dmitry Osipenko <digetx@...il.com>,
patches@...nsource.cirrus.com, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 1/1] ASoC: wm8903: implement DMIC support
пн, 27 бер. 2023 р. о 11:32 Charles Keepax <ckeepax@...nsource.cirrus.com> пише:
>
> On Sat, Mar 25, 2023 at 10:36:43AM +0200, Svyatoslav Ryhel wrote:
> > Add DMIC input and routing.
> >
> > Tested-by: Svyatoslav Ryhel <clamor95@...il.com> # ASUS TF300T
> > Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
> > ---
> > sound/soc/codecs/wm8903.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
> > index 41346e5ec5ad..9c2f0aadcff3 100644
> > --- a/sound/soc/codecs/wm8903.c
> > +++ b/sound/soc/codecs/wm8903.c
> > @@ -9,7 +9,6 @@
> > *
> > * TODO:
> > * - TDM mode configuration.
> > - * - Digital microphone support.
> > */
> >
> > #include <linux/module.h>
> > @@ -816,6 +815,7 @@ SND_SOC_DAPM_INPUT("IN2L"),
> > SND_SOC_DAPM_INPUT("IN2R"),
> > SND_SOC_DAPM_INPUT("IN3L"),
> > SND_SOC_DAPM_INPUT("IN3R"),
> > +SND_SOC_DAPM_INPUT("DMIC"),
> > SND_SOC_DAPM_INPUT("DMICDAT"),
>
> There is already a datapath for the DMIC here, DMICDAT. Are you
> sure you don't just need to set the "Left/Right ADC Input" muxes
> correctly through the ALSA controls?
>
I will check once more, but so far I was not able to set the mic to
work with DMICDAT. Only with this patch.
Best regards,
Svyatoslav R.
> >
> > SND_SOC_DAPM_OUTPUT("HPOUTL"),
> > @@ -996,6 +996,9 @@ static const struct snd_soc_dapm_route wm8903_intercon[] = {
> > { "AIFTXL", NULL, "Left Capture Mux" },
> > { "AIFTXR", NULL, "Right Capture Mux" },
> >
> > + { "ADCL", NULL, "DMIC" },
> > + { "ADCR", NULL, "DMIC" },
> > +
>
> And at any rate these should not be directly connected to the
> ADC you need some muxing to indicate whether the DMIC or AMICs
> are active. Which the DMICDAT path appears to already have.
>
> Thanks,
> Charles
Powered by blists - more mailing lists