[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPVz0n1fOB8W43B+jfFWB_8HfBzVtn7pm_NcD-GOocaqt1MN_A@mail.gmail.com>
Date: Mon, 27 Mar 2023 17:48:58 +0300
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Charles Keepax <ckeepax@...nsource.cirrus.com>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Maxim Schwalm <maxim.schwalm@...il.com>,
Dmitry Osipenko <digetx@...il.com>,
patches@...nsource.cirrus.com, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 1/1] ASoC: wm8903: implement DMIC support
пн, 27 бер. 2023 р. о 13:14 Charles Keepax <ckeepax@...nsource.cirrus.com> пише:
>
> On Mon, Mar 27, 2023 at 11:37:05AM +0300, Svyatoslav Ryhel wrote:
> > пн, 27 бер. 2023 р. о 11:32 Charles Keepax <ckeepax@...nsource.cirrus.com> пише:
> > >
> > > On Sat, Mar 25, 2023 at 10:36:43AM +0200, Svyatoslav Ryhel wrote:
> > > > Add DMIC input and routing.
> > > >
> > > > Tested-by: Svyatoslav Ryhel <clamor95@...il.com> # ASUS TF300T
> > > > Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
> > > > ---
> > > > sound/soc/codecs/wm8903.c | 5 ++++-
> > > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
> > > > index 41346e5ec5ad..9c2f0aadcff3 100644
> > > > --- a/sound/soc/codecs/wm8903.c
> > > > +++ b/sound/soc/codecs/wm8903.c
> > > > @@ -9,7 +9,6 @@
> > > > *
> > > > * TODO:
> > > > * - TDM mode configuration.
> > > > - * - Digital microphone support.
> > > > */
> > > >
> > > > #include <linux/module.h>
> > > > @@ -816,6 +815,7 @@ SND_SOC_DAPM_INPUT("IN2L"),
> > > > SND_SOC_DAPM_INPUT("IN2R"),
> > > > SND_SOC_DAPM_INPUT("IN3L"),
> > > > SND_SOC_DAPM_INPUT("IN3R"),
> > > > +SND_SOC_DAPM_INPUT("DMIC"),
> > > > SND_SOC_DAPM_INPUT("DMICDAT"),
> > >
> > > There is already a datapath for the DMIC here, DMICDAT. Are you
> > > sure you don't just need to set the "Left/Right ADC Input" muxes
> > > correctly through the ALSA controls?
> > >
> >
> > I will check once more, but so far I was not able to set the mic to
> > work with DMICDAT. Only with this patch.
> >
>
> The two should be basically equivalent when the controls are set
> right, your patch has:
>
> DMIC -> ADCL
>
> The current code has
>
> DMIC -> Left ADC Input -> ADCL
>
> The only difference is that Left ADC Input sets the ADC_DIG_MIC
> bit, but the datasheet clearly indicates that should be
> necessary for digital mics to work. Does your system definitely
> have DMICs? Without that bit set the decimator should still be
> connected to the analogue front end.
>
You are correct, this patch is not needed. It appears that the
issue was not in routing but in wm8903 gpio configuration.
DMICDAT works as intended.
> Thanks,
> Charles
Powered by blists - more mailing lists