| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230328174231.8924-2-mario.limonciello@amd.com>
Date: Tue, 28 Mar 2023 12:42:30 -0500
From: Mario Limonciello <mario.limonciello@....com>
To: Natikar Basavaraj <Basavaraj.Natikar@....com>,
Shyam Sundar S K <Shyam-sundar.S-k@....com>,
Linus Walleij <linus.walleij@...aro.org>
CC: Mario Limonciello <mario.limonciello@....com>,
<linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] pinctrl: amd: Adjust debugfs output
More fields are to be added, so to keep the display from being
too busy, adjust it.
1) Add a header to all columns
2) Except for interrupt, when fields have no data show empty
3) Remove otherwise blank whitespace
Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
drivers/pinctrl/pinctrl-amd.c | 76 ++++++++++++++---------------------
1 file changed, 30 insertions(+), 46 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 9236a132c7ba..822f29440f15 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -206,15 +206,12 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
char *level_trig;
char *active_level;
- char *interrupt_enable;
char *interrupt_mask;
char *wake_cntrl0;
char *wake_cntrl1;
char *wake_cntrl2;
char *pin_sts;
char *pull_up_sel;
- char *pull_up_enable;
- char *pull_down_enable;
char *orientation;
char debounce_value[40];
char *debounce_enable;
@@ -246,6 +243,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
continue;
}
seq_printf(s, "GPIO bank%d\n", bank);
+ seq_puts(s, "gpio\tint|active|trigger|S0i3| S3|S4/S5| Z|wake|pull| orient| debounce|reg\n");
for (; i < pin_num; i++) {
seq_printf(s, "#%d\t", i);
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
@@ -255,7 +253,6 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
u8 level = (pin_reg >> ACTIVE_LEVEL_OFF) &
ACTIVE_LEVEL_MASK;
- interrupt_enable = "+";
if (level == ACTIVE_LEVEL_HIGH)
active_level = "↑";
@@ -272,65 +269,54 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
else
level_trig = " edge";
- } else {
- interrupt_enable = "∅";
- active_level = "∅";
- level_trig = " ∅";
- }
+ if (pin_reg & BIT(INTERRUPT_MASK_OFF))
+ interrupt_mask = "😛";
+ else
+ interrupt_mask = "😷";
- if (pin_reg & BIT(INTERRUPT_MASK_OFF))
- interrupt_mask = "😛";
- else
- interrupt_mask = "😷";
- seq_printf(s, "int %s (%s)| active-%s| %s-⚡| ",
- interrupt_enable,
+ seq_printf(s, "%s| %s| %s|",
interrupt_mask,
active_level,
level_trig);
+ } else
+ seq_puts(s, " ∅| | |");
if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
wake_cntrl0 = "⏰";
else
- wake_cntrl0 = " ∅";
- seq_printf(s, "S0i3 %s| ", wake_cntrl0);
+ wake_cntrl0 = " ";
+ seq_printf(s, " %s| ", wake_cntrl0);
if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
wake_cntrl1 = "⏰";
else
- wake_cntrl1 = " ∅";
- seq_printf(s, "S3 %s| ", wake_cntrl1);
+ wake_cntrl1 = " ";
+ seq_printf(s, "%s|", wake_cntrl1);
if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
wake_cntrl2 = "⏰";
else
- wake_cntrl2 = " ∅";
- seq_printf(s, "S4/S5 %s| ", wake_cntrl2);
+ wake_cntrl2 = " ";
+ seq_printf(s, " %s|", wake_cntrl2);
if (pin_reg & BIT(WAKECNTRL_Z_OFF))
wake_cntrlz = "⏰";
else
- wake_cntrlz = " ∅";
- seq_printf(s, "Z %s| ", wake_cntrlz);
+ wake_cntrlz = " ";
+ seq_printf(s, "%s|", wake_cntrlz);
if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) {
- pull_up_enable = "+";
if (pin_reg & BIT(PULL_UP_SEL_OFF))
pull_up_sel = "8k";
else
pull_up_sel = "4k";
- } else {
- pull_up_enable = "∅";
- pull_up_sel = " ";
+ seq_printf(s, "%s ↑|",
+ pull_up_sel);
+ } else if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF)) {
+ seq_puts(s, " ↓|");
+ } else {
+ seq_puts(s, " |");
}
- seq_printf(s, "pull-↑ %s (%s)| ",
- pull_up_enable,
- pull_up_sel);
-
- if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF))
- pull_down_enable = "+";
- else
- pull_down_enable = "∅";
- seq_printf(s, "pull-↓ %s| ", pull_down_enable);
if (pin_reg & BIT(OUTPUT_ENABLE_OFF)) {
pin_sts = "output";
@@ -345,7 +331,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
else
orientation = "↓";
}
- seq_printf(s, "%s %s| ", pin_sts, orientation);
+ seq_printf(s, "%s %s|", pin_sts, orientation);
db_cntrl = (DB_CNTRl_MASK << DB_CNTRL_OFF) & pin_reg;
if (db_cntrl) {
@@ -364,19 +350,17 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
unit = 61;
}
if ((DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF) == db_cntrl)
- debounce_enable = "b +";
+ debounce_enable = "b";
else if ((DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF) == db_cntrl)
- debounce_enable = "↓ +";
+ debounce_enable = "↓";
else
- debounce_enable = "↑ +";
-
+ debounce_enable = "↑";
+ snprintf(debounce_value, sizeof(debounce_value), "%06u", time * unit);
+ seq_printf(s, "%s (🕑 %sus)|", debounce_enable, debounce_value);
} else {
- debounce_enable = " ∅";
- time = 0;
+ seq_puts(s, " |");
}
- snprintf(debounce_value, sizeof(debounce_value), "%u", time * unit);
- seq_printf(s, "debounce %s (🕑 %sus)| ", debounce_enable, debounce_value);
- seq_printf(s, " 0x%x\n", pin_reg);
+ seq_printf(s, "0x%x\n", pin_reg);
}
}
}
--
2.34.1
Powered by blists - more mailing lists