| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9d4c7762-615b-0fbd-76d2-87156e691928@ti.com>
Date: Tue, 28 Mar 2023 11:12:29 +0530
From: Md Danish Anwar <a0501179@...com>
To: Mathieu Poirier <mathieu.poirier@...aro.org>,
MD Danish Anwar <danishanwar@...com>
CC: "Andrew F. Davis" <afd@...com>, Suman Anna <s-anna@...com>,
Roger Quadros <rogerq@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Nishanth Menon <nm@...com>, <linux-remoteproc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<srk@...com>, <devicetree@...r.kernel.org>,
<netdev@...r.kernel.org>
Subject: Re: [EXTERNAL] Re: [PATCH v5 1/5] soc: ti: pruss: Add
pruss_get()/put() API
Hi Mathieu,
On 28/03/23 02:28, Mathieu Poirier wrote:
> Hi Danish
>
> On Thu, Mar 23, 2023 at 11:54:47AM +0530, MD Danish Anwar wrote:
>> From: Tero Kristo <t-kristo@...com>
>>
>> Add two new get and put API, pruss_get() and pruss_put() to the
>> PRUSS platform driver to allow client drivers to request a handle
>> to a PRUSS device. This handle will be used by client drivers to
>> request various operations of the PRUSS platform driver through
>> additional API that will be added in the following patches.
>>
>> The pruss_get() function returns the pruss handle corresponding
>> to a PRUSS device referenced by a PRU remoteproc instance. The
>> pruss_put() is the complimentary function to pruss_get().
>>
>> Co-developed-by: Suman Anna <s-anna@...com>
>> Signed-off-by: Suman Anna <s-anna@...com>
>> Signed-off-by: Tero Kristo <t-kristo@...com>
>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@...aro.org>
>> Signed-off-by: Puranjay Mohan <p-mohan@...com>
>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>> Reviewed-by: Roger Quadros <rogerq@...nel.org>
>> ---
>> drivers/remoteproc/pru_rproc.c | 2 +-
>> drivers/soc/ti/pruss.c | 60 ++++++++++++++++++-
>> .../{pruss_driver.h => pruss_internal.h} | 7 ++-
>> include/linux/remoteproc/pruss.h | 19 ++++++
>> 4 files changed, 83 insertions(+), 5 deletions(-)
>> rename include/linux/{pruss_driver.h => pruss_internal.h} (90%)
>>
>> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
>> index b76db7fa693d..4ddd5854d56e 100644
>> --- a/drivers/remoteproc/pru_rproc.c
>> +++ b/drivers/remoteproc/pru_rproc.c
>> @@ -19,7 +19,7 @@
>> #include <linux/of_device.h>
>> #include <linux/of_irq.h>
>> #include <linux/remoteproc/pruss.h>
>> -#include <linux/pruss_driver.h>
>> +#include <linux/pruss_internal.h>
>> #include <linux/remoteproc.h>
>>
>> #include "remoteproc_internal.h"
>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>> index 6882c86b3ce5..6c2bb02a521d 100644
>> --- a/drivers/soc/ti/pruss.c
>> +++ b/drivers/soc/ti/pruss.c
>> @@ -6,6 +6,7 @@
>> * Author(s):
>> * Suman Anna <s-anna@...com>
>> * Andrew F. Davis <afd@...com>
>> + * Tero Kristo <t-kristo@...com>
>> */
>>
>> #include <linux/clk-provider.h>
>> @@ -16,8 +17,9 @@
>> #include <linux/of_address.h>
>> #include <linux/of_device.h>
>> #include <linux/pm_runtime.h>
>> -#include <linux/pruss_driver.h>
>> +#include <linux/pruss_internal.h>
>> #include <linux/regmap.h>
>> +#include <linux/remoteproc.h>
>> #include <linux/slab.h>
>>
>> /**
>> @@ -30,6 +32,62 @@ struct pruss_private_data {
>> bool has_core_mux_clock;
>> };
>>
>> +/**
>> + * pruss_get() - get the pruss for a given PRU remoteproc
>> + * @rproc: remoteproc handle of a PRU instance
>> + *
>> + * Finds the parent pruss device for a PRU given the @rproc handle of the
>> + * PRU remote processor. This function increments the pruss device's refcount,
>> + * so always use pruss_put() to decrement it back once pruss isn't needed
>> + * anymore.
>> + *
>> + * Return: pruss handle on success, and an ERR_PTR on failure using one
>> + * of the following error values
>> + * -EINVAL if invalid parameter
>> + * -ENODEV if PRU device or PRUSS device is not found
>> + */
>> +struct pruss *pruss_get(struct rproc *rproc)
>> +{
>> + struct pruss *pruss;
>> + struct device *dev;
>> + struct platform_device *ppdev;
>> +
>> + if (IS_ERR_OR_NULL(rproc))
>> + return ERR_PTR(-EINVAL);
>> +
>
> There is no guarantee that @rproc is valid without calling rproc_get_by_handle()
> or pru_rproc_get().
>
Here in this API, we are checking if rproc is NULL or not. Also we are checking
is_pru_rproc() to make sure this rproc is pru-rproc only and not some other rproc.
This API will be called from driver (icssg_prueth.c) which I'll post once this
series is merged.
In the driver we are doing,
prueth->pru[slice] = pru_rproc_get(np, pru, &pruss_id);
pruss = pruss_get(prueth->pru[slice]);
So, before calling pruss_get() we are in fact calling pru_rproc_get() to make
sure it's a valid rproc.
I think in this API, these two checks (NULL check and is_pru_rproc) should be
OK as the driver is already calling pru_rproc_get() before this API.
The only way to get a "pru-rproc" is by calling pru_rproc_get(), now the check
is_pru_rproc() will only be true if it is a "pru-rproc" implying
pru_rproc_get() was called before calling this API.
Please let me know if this is OK or if any change is required.
>> + dev = &rproc->dev;
>> +
>> + /* make sure it is PRU rproc */
>> + if (!dev->parent || !is_pru_rproc(dev->parent))
>> + return ERR_PTR(-ENODEV);
>> +
>> + ppdev = to_platform_device(dev->parent->parent);
>> + pruss = platform_get_drvdata(ppdev);
>> + if (!pruss)
>> + return ERR_PTR(-ENODEV);
>> +
>> + get_device(pruss->dev);
>> +
>> + return pruss;
>> +}
>> +EXPORT_SYMBOL_GPL(pruss_get);
>> +
>> +/**
>> + * pruss_put() - decrement pruss device's usecount
>> + * @pruss: pruss handle
>> + *
>> + * Complimentary function for pruss_get(). Needs to be called
>> + * after the PRUSS is used, and only if the pruss_get() succeeds.
>> + */
>> +void pruss_put(struct pruss *pruss)
>> +{
>> + if (IS_ERR_OR_NULL(pruss))
>> + return;
>> +
>> + put_device(pruss->dev);
>> +}
>> +EXPORT_SYMBOL_GPL(pruss_put);
>> +
>> static void pruss_of_free_clk_provider(void *data)
>> {
>> struct device_node *clk_mux_np = data;
>> diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_internal.h
>> similarity index 90%
>> rename from include/linux/pruss_driver.h
>> rename to include/linux/pruss_internal.h
>> index ecfded30ed05..8f91cb164054 100644
>> --- a/include/linux/pruss_driver.h
>> +++ b/include/linux/pruss_internal.h
>> @@ -6,9 +6,10 @@
>> * Suman Anna <s-anna@...com>
>> */
>>
>> -#ifndef _PRUSS_DRIVER_H_
>> -#define _PRUSS_DRIVER_H_
>> +#ifndef _PRUSS_INTERNAL_H_
>> +#define _PRUSS_INTERNAL_H_
>>
>> +#include <linux/remoteproc/pruss.h>
>> #include <linux/types.h>
>>
>> /*
>> @@ -51,4 +52,4 @@ struct pruss {
>> struct clk *iep_clk_mux;
>> };
>>
>> -#endif /* _PRUSS_DRIVER_H_ */
>> +#endif /* _PRUSS_INTERNAL_H_ */
>> diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
>> index 039b50d58df2..93a98cac7829 100644
>> --- a/include/linux/remoteproc/pruss.h
>> +++ b/include/linux/remoteproc/pruss.h
>> @@ -4,12 +4,14 @@
>> *
>> * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
>> * Suman Anna <s-anna@...com>
>> + * Tero Kristo <t-kristo@...com>
>> */
>>
>> #ifndef __LINUX_PRUSS_H
>> #define __LINUX_PRUSS_H
>>
>> #include <linux/device.h>
>> +#include <linux/err.h>
>> #include <linux/types.h>
>>
>> #define PRU_RPROC_DRVNAME "pru-rproc"
>> @@ -44,6 +46,23 @@ enum pru_ctable_idx {
>>
>> struct device_node;
>> struct rproc;
>> +struct pruss;
>> +
>> +#if IS_ENABLED(CONFIG_TI_PRUSS)
>> +
>> +struct pruss *pruss_get(struct rproc *rproc);
>> +void pruss_put(struct pruss *pruss);
>> +
>> +#else
>> +
>> +static inline struct pruss *pruss_get(struct rproc *rproc)
>> +{
>> + return ERR_PTR(-EOPNOTSUPP);
>> +}
>> +
>> +static inline void pruss_put(struct pruss *pruss) { }
>> +
>> +#endif /* CONFIG_TI_PRUSS */
>>
>> #if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
>>
>> --
>> 2.25.1
>>
--
Thanks and Regards,
Danish.
Powered by blists - more mailing lists