lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230328095009.GC5695@thinkpad>
Date:   Tue, 28 Mar 2023 15:20:09 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     Johan Hovold <johan@...nel.org>
Cc:     andersson@...nel.org, Thinh.Nguyen@...opsys.com,
        gregkh@...uxfoundation.org, mathias.nyman@...el.com,
        konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH 4/5] usb: dwc3: qcom: Clear pending interrupt before
 enabling wake interrupt

On Tue, Mar 28, 2023 at 11:28:32AM +0200, Johan Hovold wrote:
> On Sat, Mar 25, 2023 at 10:22:16PM +0530, Manivannan Sadhasivam wrote:
> > It is possible that there may be a pending interrupt logged into the dwc IP
> > while the interrupts were disabled in the driver. And when the wakeup
> > interrupt is enabled, the pending interrupt might fire which is not
> > required to be serviced by the driver.
> > 
> > So always clear the pending interrupt before enabling wake interrupt.
> > 
> > Cc: stable@...r.kernel.org # 5.20
> > Fixes: 360e8230516d ("usb: dwc3: qcom: Add helper functions to enable,disable wake irqs")
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > ---
> >  drivers/usb/dwc3/dwc3-qcom.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> > index bbf67f705d0d..f1059dfcb0e8 100644
> > --- a/drivers/usb/dwc3/dwc3-qcom.c
> > +++ b/drivers/usb/dwc3/dwc3-qcom.c
> > @@ -346,6 +346,8 @@ static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity)
> >  	if (!irq)
> >  		return;
> >  
> > +	irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, 0);
> > +
> 
> This looks like a hack (and a layering violation). Note that there are
> no other non-irqchip drivers calling this function.
> 

I can check if this can be achieved by clearing some dwc specific registers.

- Mani

> >  	if (polarity)
> >  		irq_set_irq_type(irq, polarity);
> 
> Johan

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ