[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <MW5PR12MB559880B0E220BDBD64E06D2487889@MW5PR12MB5598.namprd12.prod.outlook.com>
Date: Tue, 28 Mar 2023 12:52:15 +0000
From: "Gaddam, Sarath Babu Naidu" <sarath.babu.naidu.gaddam@....com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
"davem@...emloft.net" <davem@...emloft.net>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"kuba@...nel.org" <kuba@...nel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>
CC: "michal.simek@...inx.com" <michal.simek@...inx.com>,
"radhey.shyam.pandey@...inx.com" <radhey.shyam.pandey@...inx.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Sarangi, Anirudha" <anirudha.sarangi@....com>,
"Katakam, Harini" <harini.katakam@....com>,
"git (AMD-Xilinx)" <git@....com>
Subject: RE: [PATCH net-next V7] dt-bindings: net: xlnx,axi-ethernet: convert
bindings document to yaml
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Sent: Tuesday, March 14, 2023 9:22 PM
> To: Gaddam, Sarath Babu Naidu
> <sarath.babu.naidu.gaddam@....com>; davem@...emloft.net;
> edumazet@...gle.com; kuba@...nel.org; pabeni@...hat.com;
> robh+dt@...nel.org; krzysztof.kozlowski+dt@...aro.org
> Cc: michal.simek@...inx.com; radhey.shyam.pandey@...inx.com;
> netdev@...r.kernel.org; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; Sarangi,
> Anirudha <anirudha.sarangi@....com>; Katakam, Harini
> <harini.katakam@....com>; git (AMD-Xilinx) <git@....com>
> Subject: Re: [PATCH net-next V7] dt-bindings: net: xlnx,axi-ethernet:
> convert bindings document to yaml
>
> On 08/03/2023 07:12, Sarath Babu Naidu Gaddam wrote:
> > From: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>
> >
> > Convert the bindings document for Xilinx AXI Ethernet Subsystem from
> > txt to yaml. No changes to existing binding description.
> >
>
> (...)
>
> > +properties:
> > + compatible:
> > + enum:
> > + - xlnx,axi-ethernet-1.00.a
> > + - xlnx,axi-ethernet-1.01.a
> > + - xlnx,axi-ethernet-2.01.a
> > +
> > + reg:
> > + description:
> > + Address and length of the IO space, as well as the address
> > + and length of the AXI DMA controller IO space, unless
> > + axistream-connected is specified, in which case the reg
> > + attribute of the node referenced by it is used.
>
> Did you test it with axistream-connected? The schema and description
> feel contradictory and tests would point the issue.
Thanks for review comments. We tested with axistream-connected and
did not observe any errors. Do you anticipate any issues/errors ?
will address remaining review comments.
Thanks,
sarath
> > + maxItems: 2
> > +
> > + interrupts:
> > + items:
> > + - description: Ethernet core interrupt
> > + - description: Tx DMA interrupt
> > + - description: Rx DMA interrupt
> > + description:
> > + Ethernet core interrupt is optional. If axistream-connected
> property is
> > + present DMA node should contains TX/RX DMA interrupts else
> DMA interrupt
> > + resources are mentioned on ethernet node.
> > + minItems: 1
> > +
> > + phy-handle: true
> > +
> > + xlnx,rxmem:
> > + description:
> > + Set to allocated memory buffer for Rx/Tx in the hardware.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + phy-mode:
> > + items:
> > + - description: MII
> > + - description: GMII
> > + - description: RGMII
> > + - description: SGMII
> > + - description: 1000BaseX
>
> I have doubts you tested it... Since when this is a list? How does it exactly
> work and what do you want to show here?
>
> connection type is enum.
>
>
> > + minItems: 1
> > +
> > + xlnx,phy-type:
> > + description:
> > + Do not use, but still accepted in preference to phy-mode.
> > + deprecated: true
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + xlnx,txcsum:
> > + description:
> > + TX checksum offload. 0 or empty for disabling TX checksum
> offload,
> > + 1 to enable partial TX checksum offload and 2 to enable full TX
> > + checksum offload.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [0, 1, 2]
> > +
> > + xlnx,rxcsum:
> > + description:
> > + RX checksum offload. 0 or empty for disabling RX checksum
> offload,
> > + 1 to enable partial RX checksum offload and 2 to enable full RX
> > + checksum offload.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [0, 1, 2]
> > +
> > + xlnx,switch-x-sgmii:
> > + type: boolean
> > + description:
> > + Indicate the Ethernet core is configured to support both 1000BaseX
> and
> > + SGMII modes. If set, the phy-mode should be set to match the
> mode
> > + selected on core reset (i.e. by the basex_or_sgmii core input line).
> > +
> > + clocks:
> > + items:
> > + - description: Clock for AXI register slave interface.
> > + - description: AXI4-Stream clock for TXD RXD TXC and RXS
> interfaces.
> > + - description: Ethernet reference clock, used by signal delay
> primitives
> > + and transceivers.
> > + - description: MGT reference clock (used by optional internal
> > + PCS/PMA PHY)
> > +
> > + clock-names:
> > + items:
> > + - const: s_axi_lite_clk
> > + - const: axis_clk
> > + - const: ref_clk
> > + - const: mgt_clk
> > +
> > + axistream-connected:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: Phandle of AXI DMA controller which contains the
> resources
> > + used by this device. If this is specified, the DMA-related resources
> > + from that device (DMA registers and DMA TX/RX interrupts) rather
> than
> > + this one will be used.
> > +
> > + mdio:
> > + type: object
> > +
> > + pcs-handle:
>
> maxItems: 1
>
> > + description: Phandle to the internal PCS/PMA PHY in SGMII or
> 1000Base-X
> > + modes, where "pcs-handle" should be used to point to the
> PCS/PMA PHY,
> > + and "phy-handle" should point to an external PHY if exists.
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists