[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ddeb8021-2247-4ec0-4861-56a9f8d617f7@linaro.org>
Date: Tue, 28 Mar 2023 15:30:50 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Rohit Agarwal <quic_rohiagar@...cinc.com>, agross@...nel.org,
andersson@...nel.org, lee@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, mani@...nel.org,
lpieralisi@...nel.org, kw@...ux.com, bhelgaas@...gle.com,
manivannan.sadhasivam@...aro.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH v4 5/5] ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
On 17.03.2023 07:53, Rohit Agarwal wrote:
> Enable PCIe Endpoint controller on the SDX65 MTP board based
> on Qualcomm SDX65 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
> ---
> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 70720e6..afe970a 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -245,6 +245,17 @@
> status = "okay";
> };
>
> +&pcie_ep {
> + pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
> + &pcie_ep_wake_default>;
This seems misaligned, the &s should be one below another
But other than that:
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> + pinctrl-names = "default";
> +
> + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> +
> + status = "okay";
> +};
> +
> &pcie_phy {
> vdda-phy-supply = <&vreg_l1b_1p2>;
> vdda-pll-supply = <&vreg_l4b_0p88>;
> @@ -277,6 +288,29 @@
> status = "okay";
> };
>
> +&tlmm {
> + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
> + pins = "gpio56";
> + function = "pcie_clkreq";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + pcie_ep_perst_default: pcie-ep-perst-default-state {
> + pins = "gpio57";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + pcie_ep_wake_default: pcie-ep-wake-default-state {
> + pins = "gpio53";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> &usb {
> status = "okay";
> };
Powered by blists - more mailing lists