linux-kernel - Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAA8EJpprgiXWZC2W3JSgG3jtTZDtbwoeQ6LBK=pqfpk0oMvNRw@mail.gmail.com>
Date:   Thu, 30 Mar 2023 00:32:50 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Konrad Dybcio <konrad.dybcio@...aro.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>,
        Jordan Crouse <jordan@...micpenguin.net>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Vinod Koul <vkoul@...nel.org>, Rob Clark <robdclark@...il.com>,
        Stephen Boyd <sboyd@...eaurora.org>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Andy Gross <andy.gross@...aro.org>
Subject: Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table

On Wed, 29 Mar 2023 at 22:17, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>
> Remove the self-explanatory comment about opp-supported-hw contents,
> add required-opps to ensure reasonable power domain levels are voted
> for (currently we've been piggybacking off of miracles and MDP votes)
> and add newlines between each subnode.

I'm not sure this is 100% correct. The values that you add are correct
for the voltage scaling case. However, based on the vendor kernel
sources I think that MX should only be scaled if the voltage is scaled
too. I might be wrong here.

>
> Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 4dd37f72e018..62ad30e94f40 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1244,37 +1244,45 @@ gpu: gpu@...000 {
>                         gpu_opp_table: opp-table {
>                                 compatible = "operating-points-v2";
>
> -                               /*
> -                                * 624Mhz is only available on speed bins 0 and 3.
> -                                * 560Mhz is only available on speed bins 0, 2 and 3.
> -                                * All the rest are available on all bins of the hardware.
> -                                */
>                                 opp-624000000 {
>                                         opp-hz = /bits/ 64 <624000000>;
> +                                       required-opps = <&rpmpd_opp_turbo>;
>                                         opp-supported-hw = <0x09>;
>                                 };
> +
>                                 opp-560000000 {
>                                         opp-hz = /bits/ 64 <560000000>;
> +                                       required-opps = <&rpmpd_opp_turbo>;
>                                         opp-supported-hw = <0x0d>;
>                                 };
> +
>                                 opp-510000000 {
>                                         opp-hz = /bits/ 64 <510000000>;
> +                                       required-opps = <&rpmpd_opp_nom>;
>                                         opp-supported-hw = <0xff>;
>                                 };
> +
>                                 opp-401800000 {
>                                         opp-hz = /bits/ 64 <401800000>;
> +                                       required-opps = <&rpmpd_opp_nom>;
>                                         opp-supported-hw = <0xff>;
>                                 };
> +
>                                 opp-315000000 {
>                                         opp-hz = /bits/ 64 <315000000>;
> +                                       required-opps = <&rpmpd_opp_svs>;
>                                         opp-supported-hw = <0xff>;
>                                 };
> +
>                                 opp-214000000 {
>                                         opp-hz = /bits/ 64 <214000000>;
> +                                       required-opps = <&rpmpd_opp_svs>;
>                                         opp-supported-hw = <0xff>;
>                                 };
> +
>                                 opp-133000000 {
>                                         opp-hz = /bits/ 64 <133000000>;
> +                                       required-opps = <&rpmpd_opp_svs>;
>                                         opp-supported-hw = <0xff>;
>                                 };
>                         };
>
> --
> 2.40.0
>


-- 
With best wishes
Dmitry